KSC1009
KSC1009
High Voltage Amplifier
• • • • • High Collector-Base Voltage : VCBO=160V Collector Current : IC=700mA Collector Power Dissipation : PC=800mW Complement to KSA709 Suffix “-C” means Center Collector (1. Emitter 2. Collector 3. Base)
1
TO-92
1. Emitter 2. Base 3. Collector
NPN Epitaxial Silicon Transistor
Absolute Maximum Ratings Ta=25°C unless otherwise noted
Symbol VCBO VCEO VEBO IC PC TJ TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Collector Power Dissipation Junction Temperature Storage Temperature Ratings 160 140 8 700 800 150 -55 ~ 150 Units V V V mA mW °C °C
Electrical Characteristics Ta=25°C unless otherwise noted
Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE VCE (sat) VBE (sat) fT Cob Parameter Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Current Gain Bandwidth Product Output Capacitance Test Condition IC=100µA, IE=0 IC=10mA, IB=0 IE=10µA, IC=0 VCB=60V, IE=0 VEB=5V, IC=0 VCE=2V, IC=50mA IC=200mA, IB=20mA IC=200mA, IB=20mA VCE=10V, IC=50mA VCB=10V, IE=0, f=1MHz 30 40 0.2 0.86 50 8 Min. 160 140 8 0.1 0.1 400 0.7 1.0 V V MHz pF Typ. Max. Units V V V µA µA
hFE Classification
Classification hFE R 40 ~ 80 O 70 ~ 140 Y 120 ~ 240 G 200 ~ 400
©2001 Fairchild Semiconductor Corporation
Rev. A1, June 2001
KSC1009
Typical Characteristics
100 90
IB=0.8mA IB=0.6mA IB=0.4mA
1000
VCE = 5V
IC[mA], COLLECTOR CURRENT
80 70 60 50 40 30
hFE, DC CURRENT GAIN
10
100
10
IB=0.2mA
20 10 0 0 2 4 6 8
1 1 10 100 1000
VCE[V], COLLECTOR-EMITTER VOLTAGE
IC[mA], COLLECTOR CURRENT
Figure 1. Static Characteristic
Figure 2. DC current Gain
VBE(sat), VCE(sat)[V], SATURATION VOLTAGE
10
1000
IC=10IB
VCE=2V
V BE(sat)
1
IC[mA], COLLECTOR CURRENT
100 1000
100
VCE(sat)
0.1
10
0.01 1 10
1 0.0
0.2
0.4
0.6
0.8
1.0
1.2
IC[mA], COLLECTOR CURRENT
VBE[V], BASE-EMITTER VOLTAGE
Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage
Figure 4. Base-Emitter On Voltage
100
f=1MHz IE=0
Cob[pF],CAPACTIANCE
10
1 1 10 100
VCB[V], COLLECTOR-BASE VOLTAGE
Figure 5. Collector Output Capacitance
©2001 Fairchild Semiconductor Corporation
Rev. A1, June 2001
KSC1009
Package Demensions
TO-92
4.58 –0.15
+0.25
0.46
14.47 ±0.40
±0.10
4.58 ±0.20
1.27TYP [1.27 ±0.20] 3.60
±0.20
1.27TYP [1.27 ±0.20]
0.38 –0.05
+0.10
3.86MAX
1.02 ±0.10
0.38 –0.05
+0.10
(R2.29)
(0.25)
Dimensions in Millimeters
©2001 Fairchild Semiconductor Corporation Rev. A1, June 2001
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. STAR*POWER™ FAST® OPTOPLANAR™
ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™
FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MICROWIRE™ OPTOLOGIC™
PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SLIENT SWITCHER® SMART START™
Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TruTranslation™ TinyLogic™ UHC™ UltraFET® VCX™
STAR*POWER is used under license
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be which, (a) are intended for surgical implant into the body, reasonably expected to cause the failure of the life support or (b) support or sustain life, or (c) whose failure to perform device or system, or to affect its safety or effectiveness. when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Preliminary
No Identification Needed
Full Production
Obsolete
Not In Production
©2001 Fairchild Semiconductor Corporation
Rev. H3
很抱歉,暂时无法提供与“KSC1009YTA_NL”相匹配的价格&库存,您可以联系我们找货
免费人工找货