KSD1589

KSD1589 KSD1589 Low Frequency Power Amplifier Low Speed Switching Industrial Use • Complement to KSB1098 1 1.Base TO-220F 2.Collector 3.Emitter NPN Silicon Darlington Transistor Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO VCEO VEBO IC ICP IB PC TJ TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current (DC) *Collector Current (Pulse) Base Current Collector Dissipation (Ta=25°C) Collector Dissipation (TC=25°C) Junction Temperature Storage Temperature Value 150 100 7 5 8 0.5 1.5 20 150 - 55 ~ 150 Units V V V A A A W W °C °C R1 R2 E B Equivalent Circuit C R1 ≅ 8kΩ R 2 ≅ 0.12 k Ω * PW≤10ms, Duty Cycle≤50% Electrical Characteristics TC=25°C unless otherwise noted Symbol ICBO h FE1 hFE2 VCE(sat) VBE(sat) tON tstg tf Parameter Collector Cut-off Current *DC Current Gain *Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Turn On Time Storage Time Fall Time Test Condition VCB = 100V, IE = 0 VCE = 2V, IC = 3A VCE = 2V, IC = 5A IC = 3A, IB = 3mA VCC⋅=⋅50V, IC = 3A IB1 = - IB2 = 3mA RL = 16.7Ω IC = 3A, IB = 3mA Min. 2K 500 Typ. 6K 0.9 1.6 1 3.5 1.2 Max. 1 15K 1.5 2 V V µs µs µs Units µA * Pulse Test: PW≤350µs, Duty Cycle≤2% Pulsed hFE Classification Classification hFE1 R 2000 ~ 5000 O 3000 ~ 7000 Y 5000 ~ 15000 ©2003 Fairchild Semiconductor Corporation Rev. B, September 2003 KSD1589 Typical Characteristics IB = 1mA 5 10k A 0. 7 m VCE = 2 V IC[A], COLLECTOR CURRENT 4 IB = 0.5 IB mA = hFE, DC CURRENT GAIN IB = 0 1k 3 IB = 0.4mA 2 IB = 0.35mA 1 100 IB = 0.3mA 0 0 1 2 3 4 5 10 0.001 0.1 1 10 VCE[V], COLLECTOR-EMITTER VOLTAGE IC [A], COLLECTOR CURRENT Figure 1. Static Characteristic Figure 2. DC current Gain VBE(sat), VCE(sat)[V], SATURATION VOLTAGE 100 100 IC = 1000 IB IC[A], COLLECTOR CURRENT 10 10 10 0µ 30 s 0µ s s 1m 10 s ms 3m 1 s 0m 10 VBE(sat) 1 VCE(sat) 0.1 0.1 0.1 0.01 1 10 1 10 100 500 IC[A], COLLECTOR CURRENT VCE[V], COLLECTOR-EMITTER VOLTAGE Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage Figure 4. Safe Operating Area 30 25 PC[W], POWER DISSIPATION 20 15 10 5 0 0 25 50 o 75 100 125 150 175 TC[ C], CASE TEMPERATURE Figure 5. Power Derating ©2003 Fairchild Semiconductor Corporation Rev. B, September 2003 KSD1589 Package Dimensions TO-220F 3.30 ±0.10 10.16 ±0.20 (7.00) ø3.18 ±0.10 2.54 ±0.20 (0.70) 6.68 ±0.20 15.80 ±0.20 (1.00x45°) MAX1.47 9.75 ±0.30 0.80 ±0.10 (3 ) 0° 0.35 ±0.10 2.54TYP [2.54 ±0.20] #1 0.50 –0.05 2.54TYP [2.54 ±0.20] 4.70 ±0.20 +0.10 2.76 ±0.20 9.40 ±0.20 Dimensions in Millimeters ©2003 Fairchild Semiconductor Corporation Rev. B, September 2003 15.87 ±0.20 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT Quiet Series™ ActiveArray™ FAST® FASTr™ Bottomless™ FRFET™ CoolFET™ CROSSVOLT™ GlobalOptoisolator™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ E2CMOS™ EnSigna™ ImpliedDisconnect™ FACT™ ISOPLANAR™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ DISCLAIMER LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2003 Fairchild Semiconductor Corporation Rev. I5