KSD880

KSD880 KSD880 Low Frequency Power Amplifier • Complement to KSB834 1 TO-220 2.Collector 3.Emitter 1.Base NPN Epitaxial Silicon Transistor Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCBO VCEO VEBO IC IB PC TJ TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Base Current Collector Dissipation (TC=25°C) Junction Temperature Storage Temperature Value 60 60 7 3 0.3 30 150 - 55 ~ 150 Units V V V A A W °C °C Electrical Characteristics TC=25°C unless otherwise noted Symbol ICBO IEBO BVCEO hFE1 hFE2 VCE(sat) VBE(on) fT Cob tON tSTG tF Parameter Collector Cut-off Current Emitter Cut-off Current Collector-Emitter Breakdown Voltage DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter On Voltage Current Gain Bandwidth Product Output Capacitance Turn ON Time Storage Time Fall Time Test Condition VCB = 60V, IE = 0 VEB = 7V, IC = 0 IC = 50mA, IB = 0 VCE = 5V, IC = 0.5A VCE = 5V, IC = 3A IC = 3A, IB = 0.3A VCE = 5V, IC = 0.5A VCE = 5V, IC = 0.5A VCB = 10V, IE = 0, f = 1MHz VCC = 30V, IC = 1A IB1 = - IB2 = 0.2A R L = 3 0Ω 60 60 20 0.4 0.7 3 70 0.8 1.5 0.8 300 1 1 V V MHz pF µs µs µs Min. Typ. Max. 100 100 Units µA µA V hFE Classification Classification hFE1 O 60 ~ 120 Y 100 ~ 200 G 150 ~ 300 ©2000 Fairchild Semiconductor International Rev. A, February 2000 KSD880 Typical Characteristics 4 1000 IC[A], COLLECTOR CURRENT IB = 50mA IB = 40mA 2 hFE, DC CURRENT GAIN 3 IB = 90mA IB = 80mA IB = 70mA IB = 60mA VCE = 5V IB = 30mA IB = 20mA IB = 10mA 100 1 IB = 0 0 0 2 4 6 8 10 0.01 0.1 1 10 VCE[V], COLLECTOR-EMITTER VOLTAGE IC[A], COLLECTOR CURRENT Figure 1. Static Characteristic Figure 2. DC current Gain 4 VBE(sat), VCE(sat)[V], SATURATION VOLTAGE 10 VCE = 5V IC = 1 0 IB IC[A], COLLECTOR CURRENT 3 1 2 0.1 1 V CE(sat) 0 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 0.01 0.01 0.1 1 10 VBE[V], BASE-EMITTER VOLTAGE IC[A], COLLECTOR CURRENT Figure 3. Base-Emitter On Voltage Figure 4. Collector-Emitter Saturation Voltage vs Collector Current 10 40 IC(Pulse) MAX. 35 ms s 10 0m 10 IC[A], COLLECTOR CURRENT IC(Continous) MAX. PC[W], POWER DISSIPATION 30 s 1m 25 1s D 1 20 VCEO MAX. C =2 (T C 5℃ ) 15 10 5 0.1 1 10 100 0 0 25 50 o 75 100 125 150 175 VCE[V], COLLECTOR-EMITTER VOLTAGE TC[ C], CASE TEMPERATURE Figure 5. Safe Operating Area Figure 6. Power Derating ©2000 Fairchild Semiconductor International Rev. A, February 2000 KSD880 Package Demensions TO-220 9.90 ±0.20 1.30 ±0.10 2.80 ±0.10 4.50 ±0.20 (8.70) ø3.60 ±0.10 (1.70) 1.30 –0.05 +0.10 9.20 ±0.20 (1.46) 13.08 ±0.20 (1.00) (3.00) 15.90 ±0.20 1.27 ±0.10 1.52 ±0.10 0.80 ±0.10 2.54TYP [2.54 ±0.20] 2.54TYP [2.54 ±0.20] 10.08 ±0.30 18.95MAX. (3.70) (45° ) 0.50 –0.05 +0.10 2.40 ±0.20 10.00 ±0.20 Dimensions in Millimeters ©2000 Fairchild Semiconductor International Rev. A, February 2000 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ E2CMOS™ FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ DISCLAIMER HiSeC™ ISOPLANAR™ MICROWIRE™ POP™ PowerTrench® QFET™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ UHC™ VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR INTERNATIONAL. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2000 Fairchild Semiconductor International Rev. E