KSP8099

KSP8098/8099 KSP8098/8099 Amplifier Transistor • Collector-Emitter Voltage: VCEO= KSP8098: 60V KSP8099: 80V • Collector Power Dissipation: PC (max)=625mW • Suffix “-C” means Center Collector (1. Emitter 2. Collector 3. Base) 1 TO-92 1. Emitter 2. Base 3. Collector NPN Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO Parameter Collector-Base Voltage : KSP8098 : KSP8099 VCEO Collector-Emitter Voltage : KSP8098 : KSP8099 VEBO IC PC TJ TSTG Emitter-Base Voltage Collector Current Collector Power Dissipation Junction Temperature Storage Temperature 60 80 6 500 625 150 -55 ~ 150 V V V mA mW °C °C 60 80 V V Value Units Electrical Characteristics Ta=25°C unless otherwise noted Symbol BVCBO Parameter Collector-Base Breakdown Voltage : KSP8098 : KSP8099 * Collector-Emitter Breakdown Voltage : KSP8098 : KSP8099 Emitter-Base Breakdown Voltage Collector Cut-off Current : KSP8098 : KSP8099 ICEO IEBO hFE Collector Cut-off Current Emitter Cut-off Current DC Current Gain VCB=60V, IE=0 VCB=80V, IE=0 VCE=60V, IB=0 VEB=6V, IC=0 VCE=5V, IC=1mA VCE=5V, IC=10mA VCE=5V, IC=100mA IC=100mA, IB=5mA IC=100mA, IB=10mA VCE=5V, IC=1mA VCE=5V, IC=10mA VCE=5V, IC=10mA f=100MHz VCB=5V, IE=0 f=1MHz 0.5 0.6 150 6 100 100 75 100 100 100 100 300 nA nA nA nA Test Condition IC=100µA, IE=0 Min. 60 80 IC=10mA, IB=0 60 80 IE=10µA, IC=0 6 V V V Max. Units V V BVCEO BVEBO ICBO VCE (sat) VBE (on) Collector-Emitter Saturation Voltage * Base-Emitter On Voltage : KSP8098 : KSP8099 0.4 0.3 0.7 0.8 V V V V MHz pF fT Cob Current Gain Bandwidth Product Output Capacitance * Pulse Test: Pulse Width≤300µs, Duty Cycle≤2% ©2001 Fairchild Semiconductor Corporation Rev. A1, July 2001 KSP8098/8099 Typical Characteristics VBE(sat), VCE(sat)[V], SATURATION VOLTAGE 1000 10 IC = 10 IB VCE = 5V hFE, DC CURRENT GAIN 1 VBE(sat) 100 0.1 V CE(sat) 10 0.1 0.01 1 10 100 1000 1 10 100 IC[mA], COLLECTOR CURRENT IC[mA], COLLECTOR CURRENT Figure 1. DC current Gain Figure 2. Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage 10 1000 IE = 0 f = 1MHz fT[MHz], CURRENT GAIN BANDWIDTH PRODUCT VCE = 5V Cob [pF], CAPACITANCE 100 1 0.1 10 1 10 100 1000 1 10 100 VCB [V], COLLECTOR-BASE VOLTAGE IC[mA], COLLECTOR CURRENT Figure 3. Output Capacitance Figure 4. Current Gain Bandwidth Product ©2001 Fairchild Semiconductor Corporation Rev. A1, July 2001 KSP8098/8099 Package Demensions TO-92 4.58 –0.15 +0.25 0.46 14.47 ±0.40 ±0.10 4.58 ±0.20 1.27TYP [1.27 ±0.20] 3.60 ±0.20 1.27TYP [1.27 ±0.20] 0.38 –0.05 +0.10 3.86MAX 1.02 ±0.10 0.38 –0.05 +0.10 (R2.29) (0.25) Dimensions in Millimeters ©2001 Fairchild Semiconductor Corporation Rev. A1, July 2001 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. STAR*POWER™ FAST® OPTOPLANAR™ ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ ISOPLANAR™ LittleFET™ MicroFET™ MICROWIRE™ OPTOLOGIC™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SLIENT SWITCHER® SMART START™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TruTranslation™ TinyLogic™ UHC™ UltraFET® VCX™ STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be which, (a) are intended for surgical implant into the body, reasonably expected to cause the failure of the life support or (b) support or sustain life, or (c) whose failure to perform device or system, or to affect its safety or effectiveness. when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2001 Fairchild Semiconductor Corporation Rev. H3