LM239AN

www.fairchildsemi.com LM2901,LM339/LM339A,LM3302 LM239/LM239A Quad Comparator Features • Single or Dual Supply Operation • Wide Range of Supply Voltage LM2901,LM339/LM339A,LM239/LM239A: 2 ~ 36V (or ±1 ~ ±18V) LM3302: 2 ~ 28V (or ±1 ~ ±14V) • Low Supply Current Drain 800µA Typ. • Open Collector Outputs for Wired and Connectors • Low Input Bias Current 25nA Typ. • Low Input Offset Current ±2.3nA Typ. • Low Input Offset Voltage ±1.4mV Typ. • Input Common Mode Voltage Range Includes Ground. • Low Output Saturation Voltage • Output Compatible With TTL, DTL and MOS Logic System Description The LM2901, LM339/LM339A ,LM239/LM239A, LM3302 consist of four independent voltage comparators designed to operate from single power supply over a wide voltage range. 14-DIP 1 14-SOP 1 Internal Block Diagram OUT2 1 14 OUT3 13 OUT4 12 GND + OUT1 2 VCC 3 - + IN1(-) 4 11 IN4(+) 10 IN4(-) IN1(+) 5 IN2(-) 6 9 IN3(+) + - + IN2(+) 7 8 IN3(-) Rev. 1.0.2 ©2002 Fairchild Semiconductor Corporation LM2901,LM339/LM339A,LM3302 LM239/LM239A Schematic Diagram VCC Q12 Q9 Q14 D2 Q2 D1 D3 Q3 D4 R2 IN(+) Q1 Q4 OUTPUT Q8 Q7 Q5 Q6 Q13 D5 R1 D6 GND IN(-) Absolute Maximum Ratings Parameter Supply Voltage Supply Voltage only LM3302 Differential Input Voltage Differential Input Voltage Only LM3302 Input Voltage Input Voltage Only LM3302 Output Short Circuit to GND Power Dissipation Operating Temperature LM339/LM339A LM2901/LM3302 LM239/LM239A Storage Temperature Symbol VCC VCC VI(DIFF) VI(DIFF) VI VI PD TOPR Value ±18 or 36 ±14 or 28 36 28 -0.3 to +36 -0.3 to +28 Continuous 570 0 ~ +70 -40 ~ +85 -25 ~ +85 -65 ~ +150 Unit V V V V V V mW °C TSTG °C 2 LM2901,LM339/LM339A,LM3302 LM239/LM239A Electrical Characteristics (VCC = 5V, TA = 25°C, unless otherwise specified) Parameter Input Offset Voltage Input Offset Current Input Bias Current Input Common Mode Voltage Range Supply Current Voltage Gain Large Signal Response Time Response Time Output Sink Current Output Saturation Voltage Output Leakage Current Symbol VIO IIO IBIAS Conditions VO(P) =1.4V, RS = 0Ω Note1 IIN(+) - IIN(-), VCM = 0V Note1 VCM = 0V Note1 VCC = 30V VI(R) ICC GV TLRES TRES ISINK VSAT Io(LKG) Note1 VCC = 5V, RL = ∞ VCC =15V, RL ≥ 15kΩ (for large swing) VI = TTL Logic Swing VREF = 1.4V, VRL = 5V, RL = 5.1kΩ (Note2) VRL = 5V, RL = 5.1kΩ (Note2) VI(-) ≥ 1V, VI(+) = 0V, VO(P) ≤ 1.5V VI(-) ≥ 1V, VI(+) = 0V ISINK = 4mA VI(-) = 0V VI(+) = 1V Note1 VO(P) = 5V VO(P) = 30V Note1 LM239A/LM339A Min. 0 0 50 6 Typ. 1 2.3 57 1.1 200 300 1.3 18 140 0.1 Max. 2 4.0 50 150 250 400 VCC-1.5 VCC-2 2.0 400 700 1.0 36 LM239/LM339 Min. Typ. 0 0 50 6 1.4 2.3 57 1.1 200 300 1.3 18 140 0.1 Max. 5 9.0 50 150 250 400 VCC-1.5 VCC-2 2.0 400 700 1.0 36 V mA V/mV ns µs mA mV nA µA V nA nA Unit mV Differential Voltage VI(DIFF) Note: 1. LM339/LM339A : 0 ≤ TA ≤ +70°C LM2901/LM3302 : -40 ≤ TA ≤ +85°C LM239/LM239A : -25 ≤ TA ≤ +85°C 2. These parameters, although guaranteed, are not 100% tested in production. 3 LM2901,LM339/LM339A,LM3302 LM239/LM239A Electrical Characteristics (Continued) (VCC = 5V, TA = 25°C, unless otherwise specified) Parameter Input Offset Voltage Input Offset Current Input Bias Current Input Common Mode Voltage Range Symbol VIO IIO IBIAS Conditions VO(P) =1.4V, RS = 0Ω Note1 Note1 Note1 LM2901, VCC =30V LM3302, VCC =28V Note1 RL =∞, VCC=5V Supply Current ICC RL =∞,VCC=30V (LM3302, VCC =28V) VCC =15V, RL ≥ 15kΩ (for large swing) VI =TTL Logic Swing VREF =1.4V, VRL =5V, RL =5.1kΩ (Note2) VRL = 5V, RL = 5.1kΩ (Note2) VI(-) ≥ 1V, VI(+) =0V, VO(P) ≤ 1.5V VI(-) ≥ 1V, VI(+) = 0V ISINK =4mA VI(-) = 0V VI(+) = 1V Note1 VO(P) = 5V VO(P) = 30V Note1 LM2901 0 0 25 6 2 9 2.3 50 57 200 1.1 1.6 100 300 1.3 18 140 0.1 7 15 50 200 250 500 VCC -1.5 VCC -2 2.0 2.5 400 700 1.0 36 0 0 2 6 LM3302 2 3 57 1.1 1.6 30 300 1.3 18 140 0.1 20 40 100 300 250 1000 VCC -1.5 VCC -2 2.0 2.5 400 700 1.0 28 µs mA mV nA µA V mA V/ mV ns Unit mV nA nA Min. Typ. Max. Min. Typ. Max. VI(R) V Voltage Gain Large Signal Response Time Response Time Output Sink Current Output Saturation Voltage Output Leakage Current GV TLRES TRES ISINK VSAT IO(LKG) Differential Voltage VI(DIFF) Note: 1. LM339/LM339A : 0 ≤ TA ≤ +70°C LM2901/LM3302 : -40 ≤ TA ≤ +85°C LM239/LM239A : -25 ≤ TA ≤ +85°C 2. These parameters, although guaranteed, are not 100% tested in production. 4 LM2901,LM339/LM339A,LM3302 LM239/LM239A Typical Performance Characteristics Figure 1. Supply Current vs Supply Voltage Figure 2. Input Current vs Supply Voltage Figure 3. Output Saturation Voltage vs Sink Current Figure 4. Response Time for Various Input Overdrive-Negative Transition Figure 5. Response Time for Various Input Overdrive-Positive Transition 5 LM2901,LM339/LM339A,LM3302 LM239/LM239A Mechanical Dimensions Package Dimensions in millimeters 14-DIP 6.40 ±0.20 0.252 ±0.008 19.80 MAX 0.780 19.40 ±0.20 0.764 ±0.008 #7 #8 7.62 0.300 3.25 ±0.20 0.128 ±0.008 0.20 0.008 MIN 5.08 MAX 0.200 3.30 ±0.30 0.130 ±0.012 0.25 –0.05 +0.10 0~15° 0.010 –0.002 +0.004 6 2.54 0.100 0.46 ±0.10 0.018 ±0.004 1.50 ±0.10 0.059 ±0.004 #1 #14 ( 2.08 ) 0.082 LM2901,LM339/LM339A,LM3302 LM239/LM239A Mechanical Dimensions (Continued) Package Dimensions in millimeters 14-SOP MIN 1.55 ±0.10 0.061 ±0.004 0.05 0.002 0.47 ) 0.019 MAX0.10 MAX0.004 1.27 0.050 +0.004 0.016 -0.002 0.406 +0.10 -0.05 ( #1 #14 8.70 MAX 0.343 #7 6.00 ±0.30 0.236 ±0.012 #8 1.80 MAX 0.071 +0.004 0.008 -0.002 +0.10 -0.05 0.20 3.95 ±0.20 0.156 ±0.008 0.60 ±0.20 0.024 ±0.008 5.72 0.225 0~ 8° 8.56 ±0.20 0.337 ±0.008 7 LM2901,LM339/LM339A,LM3302 LM239/LM239A Ordering Information Product Number LM339N LM339AN LM339M LM339AM LM2901N LM2901M LM3302N LM3302M LM239N LM239AN LM239M LM239AM Package 14-DIP 0 ~ +70°C 14-SOP 14-DIP 14-SOP 14-DIP 14-SOP 14-DIP -25 ~ +85°C 14-SOP -40 ~ +85°C Operating Temperature DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 11/19/02 0.0m 001 Stock#DSxxxxxxxx  2002 Fairchild Semiconductor Corporation 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.