MMBTA55

MPSA55 / MMBTA55 / PZTA55 MPSA55 MMBTA55 C PZTA55 C E C B TO-92 E SOT-23 Mark: 2H B SOT-223 B C E PNP General Purpose Amplifier This device is designed for general purpose amplifier applications at collector currents to 300 mA. Sourced from Process 73. See MPSA56 for characteristics. Absolute Maximum Ratings* Symbol VCES VCBO VEBO IC TJ, Tstg Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous TA = 25°C unless otherwise noted Parameter Collector-Emitter Voltage Value 60 60 4.0 500 -55 to +150 Units V V V mA °C Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RθJC RθJA TA = 25°C unless otherwise noted Characteristic Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient MPSA55 625 5.0 83.3 200 Max *MMBTA55 350 2.8 357 **PZTA55 1,000 8.0 125 Units mW mW/°C °C/W °C/W *Device mounted on FR-4 PCB 1.6" X 1.6" X 0.06." **Device mounted on FR-4 PCB 36 mm X 18 mm X 1.5 mm; mounting pad for the collector lead min. 6 cm2. ã 1997 Fairchild Semiconductor Corporation MPSA55/MMBTA55/PZTA55, Rev A MPSA55 / MMBTA55 / PZTA55 PNP General Purpose Amplifier Electrical Characteristics Symbol Parameter TA = 25°C unless otherwise noted (continued) Test Conditions Min Max Units OFF CHARACTERISTICS V (BR)CEO V (BR)CBO V (BR)EBO ICEO ICBO Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector-Cutoff Current Collector-Cutoff Current IC = 1 .0 mA, IB = 0 IC = 1 00 µ A, IE = 0 IE = 1 00 µA, I C = 0 V CE = 6 0 V, IB = 0 V CB = 6 0 V, IE = 0 60 60 4.0 0.1 0.1 V V V µA µA ON CHARACTERISTICS hFE VCE(sat) VBE(on) DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter On Voltage IC = 10 mA, VCE = 1.0 V IC = 100 mA, VCE = 1.0 V IC = 100 mA, IB = 10 mA IC = 100 mA, VCE = 1.0 V 100 100 0.25 1.2 V V SMALL SIGNAL CHARACTERISTICS fT Current Gain - Bandwidth Product IC = 100 mA, VCE = 1.0 V, f = 100 MHz 50 MHz *Pulse Test: Pulse Width £ 300 ms, Duty Cycle £ 2.0% TO-92 Tape and Reel Data TO-92 Packaging Configuration: Figure 1.0 Packaging Description: TO-92 parts are shipped normally in tape. These reeled parts in standard option are shipped with 2,000 units per 14” or 355.6cm diameter reel. This and some other options are further described in the Packaging Information table.These full reels are individually barcode labeled and placed inside a standard intermediate box (illustrated in figure 1.0) made of recyclable corrugated brown paper. One box contains one reel maximum. And these boxes are placed inside a barcode labeled shipping box which comes in different sizes depending on the number of parts shipped. 1 Reel per Inner box FKS Label 395mm x 375mm x 56mm Inner box(2,000cap) FKS Label TO-92 Packaging Configuration: Figure 2.0 Inner Box Bar Code Label Sample TO-92 Packaging Information Packaging Option Packaging type Qty per Reel/Tube/ Bag Reel Size Inner Box Dimension (mm) Max qty per Box Standard Standard Standard (no flow code) (no flow code) (no flow code) TNR AMMO BULK 2,000 14” Dia 395x375x56 2,000 328x162x43 2,000 1,000 237x167x96 10,000 LOT: TKLEE777 Q’TY: 1000 W/W: 0103 OPTION: 20000025 MBB : NOR P/U : 660 S/T : LOGO I/B: LOGO HIC : 0 P/T:O MIX: X P ETC: 00 / 03 / 17 06:30 DVC: KA7812-AE 01 01 Outer Box Dimension (mm) 420x420x320 525x360x265 525x360x265 Max qty per Box Weight per unit (gm) Note/Comments 10,000 0.2080 30,000 0.2080 100,000 0.2080 DVC: LOT: Q’TY: KA7812-AE IMSYS777 12000 IM 420mm x 420mm x 320mm Outer box(10,000cap) FKS Label Outer Box Bar Code Label Sample 00 / 03 / 17 07:30 01 TO-92 AMMO Packaging Configuration: Figure 3.0 88706892 A710103105 7103 15 Ammo boxes per Outer Box 328mm x 162mm x 43mm Inner box (2,000cap) FKS Label FKS Label 525mm x 360m x 265mm Outer box (30,000cap) TO-92 Bulk Packing Configuration: Figure 4.0 FKS Label 10 Vinyl bags per Inner box 1,000 units per Bulk Vinyl bag 237mm x 167mm x 96mm Bulk Inner box(10,000cap) FKS Label 525mm x 360mm x 265mm Outer box(100,000cap) ©2001 Fairchild Semiconductor Corporation October 2001, Rev. A TO-92 Tape and Reel Data, continued TO-92 Reeling Style Configuration: Figure 5.0 Standard Machine Option TO-92 Radial Ammo Packaging Configuration: Figure 6.0 Standard FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON BOTTOM Machine Option FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON THE TOP SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS COLLECTOR ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON TOP FIRST WIRE OFF IS EMITTER ADHESIVE TAPE IS ON BOTTOM SIDE FLAT OF TRANSISTOR IS ON BOTTOM October 2001, Rev. A TO-92 Tape and Reel Data, continued TO-92 Tape and Reel Taping Dimension Configuration: Figure 7.0 A1 P T jh A H1 H HO d J1 W2 WO W1 W P1 F1 P2 F2 DO ITEM DESCRIPTION PO Body Width Body Height Body Thickness Lead-Wire Diameter Pitch of Component Feed Hole Pitch Hole Center to Component Center Lead to Lead Distance Component Alignment F-R Tape Width Hole-Down Tape Width Hole Position Hole-Down Tape Position Height of Component From Tape Center Lead-Wire Clinch Height Component Height Lead-Wire (Tape Portion) Feed Hole Diameter Total Tape Thickness t SYMBOL A1 A T d P P0 P2 F1,F2 jh W W0 W1 W2 H H0 H1 J1 D0 t P1 DIMENSION 4.58 (+ 0.25, - 0.15) 4.58 (+/- 0.20) 3.86 (max) 0.46 (+/- 0.05) 12.7 (+/- 0.50) 12.7 (+/ -0.20) 6.35 (+/- 0.50) 2.50 (+ 0.3, - 0.10) 0.00 (+/- 1.00) 18.00 (+ 1.00, - 0.50) 6.00 (+/- 0.50) 9.00 (+/ -0.50) 1.00 (max) 19.50 (+/- 1.00) 16.00 (+/- 0.50) 27.0 (max) 2.50 (min) 4.00 (+/- 0.20) 0.65 (+/- 0.20) 3.85 (+/- 0.50) REMARK User Direction of Feed In Case of Reel Package +/- 1.00 F1-F2= +/- 0.30 H + A