MPSH24_02

MPSH24/MMBTH24 MPSH24/MMBTH24 NPN General Purpose Amplifier • This device is designed for common-emitter low noise amplifier and mixer applications with collector currents in the 100mA to 20mA range to 300MHz, and low frequency drift common-base VHF oscillator applications with high output levels for driving FET mixers. • Sourced from process 47. • See MPSH11 for characteristics. 3 2 SOT-23 1 Mark: 3A 1. Base 2. Emitter 3. Collector 1 1. Base 2. Emitter 3. Collector TO-92 Absolute Maximum Ratings TC=25°C unless otherwise noted Symbol VCEO VCBO VEBO IC TJ, Tstg Parameter Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector current Junction and Storage Temperature - Continuous Value 30 40 4.0 50 -55 ~ +150 Units V V V mA °C Electrical Characteristics TC=25°C unless otherwise noted Symbol Parameter Test Condition IC = 1.0mA, IB = 0 IC = 100µA, IE = 0 IE = 10µA, IC = 0 VCB = 15V, IE = 0 IC = 8.0mA, VCE = 10V IC = 8.0mA, VCE = 10V, f = 100MHz VCB = 10V, IE = 0, f = 1.0MHz 30 400 0.36 MHz pF Min. 30 40 4.0 50 VV nA Typ. Max. Units V Off Characteristics V(BR)CEO Collector-Emitter Sustaining Voltage * V(BR)CBO V(BR)EBO ICBO hFE fT Ccb Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cutoff Current DC Current Gain Current Gain Bandwidth Product Collector-Base Capacitance On Characteristics Small Signal Characteristics * Pulse Test: Pulse Width ≤ 300µs, Duty Cycle ≤ 2.0% Thermal Characteristics TA=25°C unless otherwise noted Symbol PD RθJC RθJA Parameter Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Max. MPSH24 625 5.0 83.3 200 556 *MMBTH24 225 1.8 Units mW mW/°C °C/W °C/W * Device mounted on FR-4 PCB 1.6” × 1.6” × 0.06" ©2002 Fairchild Semiconductor Corporation Rev. C, November 2002 MPSH24/MMBTH24 Package Dimensions TO-92 4.58 –0.15 +0.25 0.46 14.47 ±0.40 ±0.10 4.58 ±0.20 1.27TYP [1.27 ±0.20] 3.60 ±0.20 1.27TYP [1.27 ±0.20] 0.38 –0.05 +0.10 3.86MAX 1.02 ±0.10 0.38 –0.05 +0.10 (R2.29) (0.25) Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. C, November 2002 MPSH24/MMBTH24 Package Dimensions (Continued) SOT-23 0.20 MIN 2.40 ±0.10 0.40 ±0.03 1.30 ±0.10 0.45~0.60 0.03~0.10 0.38 REF 0.40 ±0.03 0.96~1.14 2.90 ±0.10 0.12 –0.023 +0.05 0.95 ±0.03 0.95 ±0.03 1.90 ±0.03 0.508REF 0.97REF Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. C, November 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FACT™ ActiveArray™ FACT Quiet series™ Bottomless™ FAST® FASTr™ CoolFET™ CROSSVOLT™ FRFET™ GlobalOptoisolator™ DOME™ EcoSPARK™ GTO™ E2CMOS™ HiSeC™ EnSigna™ I2C™ Across the board. Around the world.™ The Power Franchise™ Programmable Active Droop™ DISCLAIMER ImpliedDisconnect™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2002 Fairchild Semiconductor Corporation Rev. I1