MV5B123

SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS MV52123 AlGaAs Red MV57123 HER PACKAGE DIMENSIONS MV53123 Yellow MV5B123 Blue MV54123 Green 0.205 (5.2) 0.189 (4.8) 0.085 (2.2) 0.071 (1.8) 0.307 (7.8) 0.283 (7.2) 1.039 (26.4) MIN (anode) 0.040 (1.0) 0.100 (2.54) 0.020 (0.5) NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Lead spacing is measured where the leads emerge from the package. 3. Protruded resin under the flange is 1.5 mm (0.059") max. 4. Tolerance is ±0.12" (0.3 mm) unless otherwise noted. DESCRIPTION This rectangular LED lamp provides a lighted surface area of 2 X 5 mm. The high efficiency red and yellow solid state lamps contain a GaAsP on GaP light emitting diode. The green lamps utilize a GaP light emitting diode. The blue lamps have a GaN/SiC chip. FEATURES • General purpose indicator • Selected minimum intensities • Color diffused lens • Standard 100 mil. lead spacing • Long life solid-state reliability © 2004 Fairchild Semiconductor Corporation Page 1 of 4 3/24/04 SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS MV52123 AlGaAs Red MV57123 HER MV53123 Yellow MV5B123 Blue MV54123 Green ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified) Parameter Continuous Forward Current - IF Peak Forward Current - IF (f = 1.0 KHz, Duty Factor = 1/10) Reverse Voltage - VR (IR = 10 µA) Power Dissipation - PD Operating Temperature - TOPR Storage Temperature - TSTG Lead Soldering Time - TSOL BLUE MV5B123 30 100 10 115 HER MV57123 30 150 5 100 GREEN MV54123 30 150 5 100 -40 to +100 -40 to +100 260 for 5 sec YELLOW MV53123 25 150 5 100 AlGaAs RED MV52123 30 150 5 100 Units mA mA V mW °C °C °C ELECTRICAL / OPTICAL CHARACTERISTICS (TA =25°C) Part Number Luminous Intensity (mcd) Minimum Typical Forward Voltage (V) Maximum Typical Peak Wavelength (nm) Spectral Line Half Width (nm) Viewing Angle (°) 4.5 3.8 430 65 100 3.0 2.0 635 35 100 3.0 2.2 565 30 100 3.0 2.1 585 45 100 2.4 1.7 660 40 100 IF = 20mA IF = 20mA IF = 20mA IF = 20mA 2.0 6.0 1.0 4.0 1.0 4.0 1.0 4.0 1.5 5.0 IF = 20mA MV5B123 BLUE MV57123 HER MV54123 GREEN MV5B123 YELLOW MV5B123 AlGaAs RED Condition © 2004 Fairchild Semiconductor Corporation Page 2 of 4 3/24/04 SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS MV52123 AlGaAs Red MV57123 HER TYPICAL PERFORMANCE CURVES Fig. 1 Forward Current vs. Forward Voltage 90 2.5 MV53123 Yellow MV5B123 Blue MV54123 Green Fig. 2 Relative Luminous Intensity vs. DC Forward Current RELATIVE LUMNOUS INTENSITY (NORMALIZED AT 20 mA) 80 AlGaAs RED IF - FORWARD CURRENT (mA) 70 60 50 YELLOW 40 30 20 10 0 1.0 2.0 3.0 4.0 5.0 GREEN BLUE HER 2.0 HER YELLOW GREEN 1.5 BLUE 1.0 0.5 AlGaAs RED 0 5 10 15 20 25 30 0.0 VF - FORWARD VOLTAGE (V) IF - DC FORWARD CURRENT (mA) Fig. 3a Relative Intensity vs. Peak Wavelength 1.0 50 Fig. 4 Current Derating Curve GREEN YELLOW AlGaAs RED IF - FORWARD CURRENT (mA) 40 RELATIVE INTENSITY HER, GREEN, AlGaAs RED, BLUE 30 0.5 20 YELLOW HER 10 0 500 550 600 650 700 750 0 0 20 40 60 85 100 WAVELENGTH (nm) TA - AMBIENT TEMPERATURE (˚C) Fig. 3b Relative Intensity vs. Peak Wavelength 1.0 BLUE RELATIVE INTENSITY 0.5 0 330 380 430 480 530 580 630 680 WAVELENGTH (nm) © 2004 Fairchild Semiconductor Corporation Page 3 of 4 3/24/04 SOLID STATE LED LAMP RECTANGULAR 2 X 5 mm LED LAMPS MV52123 AlGaAs Red MV57123 HER MV53123 Yellow MV5B123 Blue MV54123 Green DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. © 2004 Fairchild Semiconductor Corporation Page 4 of 4 3/24/04