NC7SVU04_04

NC7SVU04 TinyLogic ULP-A Unbuffered Inverter July 2002 Revised March 2004 NC7SVU04 TinyLogic ULP-A Unbuffered Inverter General Description The NC7SVU04 is a single unbuffered inverter from Fairchild’s Ultra Low Power-A (ULP-A) series of TinyLogic. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for a wide low voltage operating range (0.9V to 3.6V VCC) and applications that require more drive and speed than the TinyLogic ULP series, but still offer best in class low power operation. The NC7SVU04 is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation. Features s 0.9V to 3.6V VCC supply operation s 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to 3.6V s Extremely High Speed tPD 1.5 ns typ for 2.7V to 3.6V VCC 1.8 ns typ for 2.3V to 2.7V VCC 1.9 ns typ for 1.65V to 1.95V VCC 3.2 ns typ for 1.4V to 1.6V VCC 5.9 ns typ for 1.1V to 1.3V VCC 12.0 ns typ for 0.9V VCC s Power-Off high impedance inputs and outputs s High Static Drive (IOH/IOL) ±24 mA @ 3.00V VCC ±18 mA @ 2.30V VCC ±6 mA ±4 mA ±2 mA ±20 µA @ 1.65V VCC @ 1.4V VCC @ 1.1V VCC @ 0.9V VCC s Uses patented Quiet Series noise/EMI reduction circuitry s Ultra small MicroPak leadfree package s Ultra low dynamic power Ordering Code: Order Number NC7SVU04P5X NC7SVU04L6X Package Number MAA05A MAC06A Product Code Top Mark VU4 N4 Package Description 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 5k Units on Tape and Reel Battery Life vs. VCC Supply Voltage TinyLogic ULP and ULP-A with up to 50% less power consumption can extend your battery life significantly. Battery Life = (Vbattery *Ibattery*.9)/(Pdevice)/24hrs/day Where, Pdevice = (ICC * VCC) + (CPD + C L) * VCC2 * f Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at 10MHz, with CL = 15 pF load TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. MicroPak, and Quiet Series are trademarks of Fairchild Semiconductor Corporation. © 2004 Fairchild Semiconductor Corporation DS500604 www.fairchildsemi.com NC7SVU04 Logic Symbol IEEE/IEC Connection Diagrams Pin Assignment for SC70 Pin Descriptions Pin Names A Y NC Description Input Output No Connect (Top View) Pad Assignments for MicroPak Function Table Y=A Inputs A L H H = HIGH Logic Level L = LOW Logic Level Output Y H L (Top Thru View) www.fairchildsemi.com 2 NC7SVU04 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) HIGH or LOW State (Note 2) VCC = 0V DC Input Diode Current (IIK) VIN < 0V DC Output Diode Current (IOK) VOUT < 0V VOUT > VCC DC Output Source/Sink Current (IOH/IOL) DC VCC or Ground Current per Supply Pin (ICC or Ground) Storage Temperature Range (TSTG) −0.5V to +4.6V −0.5V to +4.6V −0.5V to VCC +0.5V −0.5V to +4.6V ±50 mA −50 mA +50 mA ± 50 mA ± 50 mA −65°C to +150 °C Recommended Operating Conditions (Note 3) Supply Voltage Input Voltage (VIN) Output Voltage (VOUT) VCC = 0.0V HIGH or LOW State Output Current in IOH/IOL VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 1.95V VCC = 1.4V to 1.6V VCC = 1.1V to 1.3V VCC = 0.9V Free Air Operating Temperature (TA) Minimum Input Edge Rate (∆t/∆V) VIN = 0.8V to 2.0V, VCC = 3.0V 10 ns/V Note 1: Absolute Maximum Ratings: are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 2: IO Absolute Maximum Rating must be observed. Note 3: Unused inputs must be held HIGH or LOW. They may not float. 0.9V to 3.6V 0V to 3.6V 0V to 3.6V 0V to VCC ±24 mA ±18 mA ±6 mA ±4 mA ±2 mA ±20 µA −40°C to +85°C DC Electrical Characteristics Symbol VIH Parameter HIGH Level Input Voltage VCC (V) 0.90 TA = +25°C Min 0.8 x VCC Max TA = −40°C to +85°C Min 0.8 x VCC 0.8 x VCC 0.8 x VCC 0.8 x VCC 0.8 x VCC 0.8 x VCC 0.2 x VCC 0.2 x VCC 0.2 x VCC 0.2 x VCC 0.2 x VCC 0.2 x VCC VCC − 0.2 VCC − 0.2 VCC − 0.2 VCC − 0.3 VCC − 0.3 VCC − 0.3 VCC − 0.3 0.75 x VCC 0.75 x VCC 1.25 2.0 1.8 2.2 1.7 2.4 2.2 V IOH = −2 mA IOH = −4 mA IOH = −6 mA IOH = −12 mA IOH = −18 mA IOH = −24 mA VIN = GND IOH = −100 µA VIN = VIH 0.2 x VCC 0.2 x VCC 0.2 x VCC 0.2 x VCC 0.2 x VCC 0.2 x VCC IOH = −20 µA V V Max Units Conditions 1.10 ≤ VCC ≤ 1.30 0.8 x VCC 1.40 ≤ VCC ≤ 1.60 0.8 x VCC 1.65 ≤ VCC ≤ 1.95 0.8 x VCC 2.30 ≤ VCC < 2.70 0.8 x VCC 2.70 ≤ VCC ≤ 3.60 0.8 x VCC VIL LOW Level Input Voltage 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 VOH HIGH Level Output Voltage 0.90 1.10 ≤ VCC ≤ 1.30 VCC − 0.2 1.40 ≤ VCC ≤ 1.60 VCC − 0.3 1.65 ≤ VCC ≤ 1.95 VCC − 0.3 2.30 ≤ VCC < 2.70 VCC − 0.3 2.70 ≤ VCC ≤ 3.60 VCC − 0.3 1.10 ≤ VCC ≤ 1.30 0.75 x VCC 1.40 ≤ VCC ≤ 1.60 0.75 x VCC 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 2.70 ≤ VCC ≤ 3.60 1.25 2.0 1.8 2.2 1.7 2.4 2.2 3 www.fairchildsemi.com NC7SVU04 DC Electrical Characteristics Symbol VOL Parameter LOW Level Output Voltage VCC (V) 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 2.70 ≤ VCC ≤ 3.60 IIN ICC Input Leakage Current Quiescent Supply Current 0.90 to 3.60 0.90 to 3.60 0.90 to 3.60 (Continued) TA = +25°C Min Max 0.1 0.1 0.2 0.2 0.2 0.2 0.25 x VCC 0.25 x VCC 0.3 0.4 0.4 0.6 0.4 0.55 ±0.1 0.9 TA = −40°C to +85°C Min Max 0.1 0.1 0.2 0.2 0.2 0.2 0.25 x VCC 0.25 x VCC 0.3 0.4 0.4 0.6 0.4 0.55 ±0.5 0.9 ±0.9 µA µA V IOL = 2 mA IOL = 4 mA IOL = 6 mA IOL = 12 mA IOL = 18 mA IOL = 24 mA 0 ≤ VI ≤ 3.6V VI = VCC or GND VCC ≤ V I ≤ 3.6V VIN = VCC IOL = 100 µA VIN = VIL IOL = 20 µA Units Conditions AC Electrical Characteristics Symbol tPHL tPLH Parameter Propagation Delay VCC (V) 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance 0 0 0.90 to 3.60 2.0 1.0 1.0 0.8 0.7 Min TA = +25°C Typ 12 5.9 3.2 1.9 1.8 1.5 2.0 4.5 10 10.0 6.1 5.2 3.7 3.3 1.0 0.9 0.7 0.6 0.5 14.4 7.0 6.2 4.4 3.8 pF pF pF VI = 0V or VCC f = 10 MHz ns Max TA = −40°C to +85°C Min Max Units Conditions CL = 15 pF, RL = 1 MΩ CL = 15 pF, RL = 2 kΩ CL = 30 pF RL = 1 kΩ Figures 1, 2 Figure Number www.fairchildsemi.com 4 NC7SVU04 AC Loading and Waveforms FIGURE 1. AC Test Circuit FIGURE 2. Waveform for Inverting and Non-Inverting Functions Symbol Vmi Vmo VCC 3.3V ± 0.3V 1.5V 1.5V 2.5V ± 0.2V VCC/2 VCC/2 1.8V ± 0.15V VCC/2 VCC/2 1.5V ± 0.10V VCC/2 VCC/2 1.2V ± 0.10V VCC/2 VCC/2 0.9V VCC/2 VCC/2 5 www.fairchildsemi.com NC7SVU04 Tape and Reel Specification TAPE FORMAT for SC70 Package Designator P5X Tape Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed www.fairchildsemi.com 6 NC7SVU04 Tape and Reel Specification TAPE FORMAT for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) (Continued) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) W2 0.567 (14.40) W3 W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 7 www.fairchildsemi.com NC7SVU04 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A www.fairchildsemi.com 8 NC7SVU04 TinyLogic ULP-A Unbuffered Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 9 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com