NC7SZ08

NC7SZ08 TinyLogic® UHS 2-Input AND Gate December 2006 NC7SZ08 TinyLogic® UHS 2-Input AND Gate Features ■ Space saving SOT23 or SC70 5-lead package ■ Ultra small MicroPak™ Pb-Free leadless package ■ Ultra High Speed; tPD 2.7ns Typ. into 50pF at 5V VCC ■ High Output Drive; ±24mA at 3V VCC ■ Broad VCC Operating Range; 1.65V to 5.5V ■ Matches the performance of LCX when operated at tm General Description The NC7SZ08 is a single 2-Input AND Gate from Fairchild’s Ultra High Speed Series of TinyLogic®. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs and output are high impedance when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. 3.3V VCC ■ Power down high impedance inputs/output ■ Overvoltage tolerant inputs facilitate 5V to 3V translation ■ Patented noise/EMI reduction circuitry implemented ■ All packages are Pb-Free Ordering Information Order Number NC7SZ08M5X NC7SZ08M5_NL(1) NC7SZ08M5X_NL (2) NC7SZ08P5X NC7SZ08P5_NL (1) NC7SZ08P5X_NL (2) NC7SZ08L6X Package Number MA05B MA05B MA05B MAA05A MAA05A MAA05A MAC06A Product Code Top Mark 7Z08 7Z08 7Z08 Z08 Z08 Z08 GG Pb-Free Yes Yes Yes Yes Yes Yes Yes Package Description 5-Lead SOT23, JEDEC MO-178, 1.6mm Pb-Free 5-Lead SOT23, JEDEC MO-178, 1.6mm Pb-Free 5-Lead SOT23, JEDEC MO-178, 1.6mm 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Supplied As 3k Units on Tape and Reel 250 Units on Tape and Reel 3k Units on Tape and Reel 3k Units on Tape and Reel Pb-Free 5-Lead SC70, EIAJ 250 Units on SC-88a, 1.25mm Wide Tape and Reel 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Pb-Free 6-Lead MicroPak, 1.0mm Wide 3k Units on Tape and Reel 5k Units on Tape and Reel Notes: Pb-Free package per JEDEC J-STD-020B. 1. “_NL” indicates lead-free product (per JEDEC J-STD-020B). 2. “_NL” indicates lead-free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. ©2006 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com NC7SZ08 Rev. 1.0.0 NC7SZ08 TinyLogic® UHS 2-Input AND Gate Logic Symbol IEEE/IEC A B & Y Pin Descriptions Pin Name A, B Y NC Description Data Inputs Outputs No Connect Connection Diagrams Pin Assignment for SC70 and SOT23 Function Table Y = AB Inputs A B L H L H L = LOW Logic Level L L H 4 Output Y L L L H A B GND 1 5 VCC 2 3 Y H H = HIGH Logic Level (Top View) Pad Assignments for MicroPak A B GND 1 2 3 6 5 4 VCC NC Y (Top Through View) 2 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Absolute Maximum Ratings The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Symbol VCC VIN VOUT IIK Supply Voltage DC Input Voltage DC Output Voltage DC Input Diode Current @ VIN < -0.5V @ VIN > 6V DC Output Diode Current @ VOUT < -0.5V @ VOUT > 6V, VCC = GND DC Output Current DC VCC / GND Current Storage Temperature Parameter Rating -0.5V to +6V -0.5V to +6V -0.5V to +6V -50mA +20mA -50mA +20mA ±50mA ±50mA -65°C to +150°C 150°C 260°C 200mW 150mW IOK IOUT ICC / IGND TSTG TJ TL PD Junction Temperature under Bias Junction Lead Temperature (Soldering, 10 seconds) Power Dissipation @ +85°C SOT23-5 SC70-5 Recommended Operating Conditions(3) Symbol VCC VCC VIN VOUT TA tr, tf Supply Voltage Operation Supply Voltage Data Retention Input Voltage Output Voltage Operating Temperature Input Rise and Fall Time VCC = 1.8V, 2.5V ±0.2V VCC = 3.3V ±0.3V VCC = 5.0V ±0.5V Thermal Resistance SOT23-5 SC70-5 Parameter Rating 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC -40°C to +85°C 0ns/V to 20ns/V 0ns/V to 10ns/V 0ns/V to 5ns/V 300°C/W 425°C/W θJA Notes: 3. Unused inputs must be held HIGH or LOW. They may not float. 3 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate DC Electrical Characteristics TA = +25°C Symbol VIH VIL VOH −40°C to +85°C Max. Min. 0.75 x VCC 0.7 x VCC 0.25 x VCC 0.3 x VCC 0.25 x VCC 0.3 x VCC 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 ±1 1 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 ±10 10 µA µA V V V Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VIN Conditions VCC (V) 1.65 to 1.95 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 Min. 0.75 x VCC 0.7 x VCC Typ. Max. Units V VIN = VIH, IOH = -100µA 1.65 1.8 2.3 3.0 4.5 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.5 2.4 3.9 1.65 1.8 2.3 3.0 4.5 1.52 2.15 2.80 2.68 4.20 0.0 0.0 0.0 0.0 0.0 0.08 0.10 0.15 0.22 0.22 IOH = -4mA IOH = -8mA IOH = -16mA IOH = -24mA IOH = -32mA VOL LOW Level Output Voltage VIN = VIL, IOL = 100µA 1.65 2.3 3.0 3.0 4.5 1.65 1.8 2.3 3.0 4.5 IOL = 4mA IOL = 8mA IOL = 16mA IOL = 24mA IOL = 32mA IIN IOFF Input Leakage Current Power Off Leakage Current Quiescent Supply Current VIN = 5.5V, GND VIN or VOUT = 5.5V VIN = 5.5V, GND 1.65 2.3 3.0 3.0 4.5 0 to 5.5 0.0 ICC 1.65 to 5.5 2.0 20 µA 4 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate AC Electrical Characteristics TA = +25°C Symbol Parameter Conditions CL = 15pF, RL = 1MΩ −40°C to +85°C Min. 2.0 2.0 0.8 0.5 0.5 1.5 0.8 VCC (V) 1.65 1.8 2.5±0.2 3.3±0.3 5.0±0.5 Min. Typ. Max. 2.0 2.0 0.8 0.5 0.5 1.5 0.8 6.3 5.2 3.4 2.6 2.2 3.3 2.7 4 20 25 12 10 7 4.7 4.1 5.2 4.5 Max. 12.7 10.5 7.5 5.0 4.4 5.5 4.8 Figure Units Number ns Figure 1 Figure 3 tPLH, tPHL Propagation Delay CL = 50pF, RL = 500Ω CIN CPD Input Capacitance Power Dissipation Capacitance Note 2 3.3±0.3 5.0±0.5 0 3.3 5.0 pF pF Figure 2 Note: 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICC static) AC Loading and Waveforms VCC Input Output CL* RL *CL includes load and stray capacitance. Input PRR = 1.0MHz; tW = 500ns tRISE = 3ns VCC Input GND 10% tFALL = 3ns Figure 1. AC Test Circuit 90% 50% 90% 50% 10% tW tPLH VOH tPHL VCC A Output Input VOL 50% 50% Input = AC Waveform; tr, tf = 1.8ns; PRR = 10MHz; Duty Cycle = 50% Figure 3. AC Waveforms Figure 2. ICCD Test Circuit 5 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Tape and Reel Specification Tape Format for SC70 and SOT23 Package Designator M5X, P5X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimension inches (millimeters) Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm Dim A 0.093 (2.35) 0.130 (3.3) Dim B 0.096 (2.45) 0.130 (3.3) Dim F 0.138±0.004 (3.5±0.10) 0.138±0.002 (3.5±0.05) Dim KO 0.053±0.004 (1.35±0.10) 0.055±0.004 (1.4±0.11) Dim P1 0.157 (4) 0.157 (4) Dim W 0.315±0.004 (8±0.1) 0.315±0.012 (8±0.3) 6 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Tape and Reel Specification (Continued) Tape Format for MicroPak Package Designator P6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimension millimeters 7 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Tape and Reel Specification (Continued) Reel Dimension for MicroPak inches (millimeters) Tape Size 8mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) W2 0.567 (14.40) W3 W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 8 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Physical Dimensions millimeters unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B 9 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Physical Dimensions millimeters unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A 10 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate Physical Dimensions millimeters unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A 11 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com NC7SZ08 TinyLogic® UHS 2-Input AND Gate FAIRCHILD SEMICONDUCTOR TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT® FAST® FASTr™ FPS™ FRFET™ FACT Quiet Series™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyBoost™ TinyBuck™ TinyPWM™ TinyPower™ TinyLogic® TINYOPTO™ TruTranslation™ UHC® UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I21 Preliminary First Production No Identification Needed Full Production Obsolete Not In Production 12 NC7SZ08 Rev. 1.0.0 www.fairchildsemi.com