NC7SZ125P5X_NL

NC7SZ125P5X_NL

  • 厂商:

    FAIRCHILD(仙童半导体)

  • 封装:

  • 描述:

    NC7SZ125P5X_NL - TinyLogic UHS Buffer with 3-STATE Output - Fairchild Semiconductor

  • 详情介绍
  • 数据手册
  • 价格&库存
NC7SZ125P5X_NL 数据手册
NC7SZ125 TinyLogic£ UHS Buffer with 3-STATE Output October 1996 Revised February 2005 NC7SZ125 TinyLogic£ UHS Buffer with 3-STATE Output General Description The NC7SZ125 is a single buffer with 3-STATE output from Fairchild's Ultra High Speed Series of TinyLogic£. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V range. The inputs and output are high impedance above ground when VCC is 0V. Inputs tolerate voltages up to 6V independent of VCC operating voltage. The output tolerates voltages above VCC when in the 3-STATE condition. Features s Space saving SOT23 or SC70 5-lead package s Ultra small MicroPak¥ Pb-Free leadless package s Ultra High Speed; tPD 2.6 ns Typ into 50 pF at 5V VCC s High Output Drive; r24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V VCC s Power down high impedance inputs/output s Overvoltage Tolerant inputs facilitate 5V to 3V translation s Patented noise/EMI reduction circuitry implemented Ordering Code: Product Number NC7SZ125M5X NC7SZ125M5X_NL (Note 1) NC7SZ125P5X NC7SZ125P5X_NL (Note 1) NC7SZ125L6X Package Drawing MA05B MA05B MAA05A MAA05A MAC06A Product Code Top Mark 7Z25 7Z25 Z25 Z25 DD Package Description 5-Lead SOT23, JEDEC MO-178, 1.6mm Pb-Free 5-Lead SOT23, JEDEC MO-178, 1.6mm 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Pb-Free 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Pb-Free 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 3k Units on Tape and Reel 3k Units on Tape and Reel 3k Units on Tape and Reel 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Note 1: “_NL” indicates Pb-Free product (per JEDEC J-STD-020B). Device is available in Tape and Reel only. TinyLogic£ is a registered trademark of Fairchild Semiconductor Corporation. MicroPak¥ is a trademark of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS012161 www.fairchildsemi.com NC7SZ125 Pin Descriptions Pin Names A, OE Y NC Description Inputs Output No Connect Logic Symbol IEEE/IEC Connection Diagrams Pin Assignment for SC70 and SOT23 Function Table Inputs OE L L H H HIGH Logic Level L LOW Logic Level X Z Output In A L H X Out Y L H Z (Top View) Pad Assignment for MicroPak HIGH or LOW Logic Level HIGH Impedance State (Top Thru View) www.fairchildsemi.com 2 NC7SZ125 Absolute Maximum Ratings(Note 2) Supply Voltage (VCC) DC Input Voltage (VIN) DC Output Voltage (VOUT) DC Input Diode Current (IIK) @VIN  0.5V @ VIN ! 6V DC Output Diode Current (IOK) @VOUT  0.5V @ VOUT ! 6V, VCC GND DC Output Current (IOUT) DC VCC/GND Current (ICC/IGND) Storage Temperature (TSTG) Junction Temperature under Bias (TJ) Junction Lead Temperature (TL); (Soldering, 10 seconds) Power Dissipation (PD) @ 85qC SOT23-5 SC70-5 200 mW 150 mW 260qC 0.5V to 6V 0.5V to 6V 0.5V to 6V 50 mA 20 mA 50 mA 20 mA r 50 mA r 50 mA 65qC to 150qC 150qC Recommended Operating Conditions (Note 3) Supply Voltage Operating (VCC) Supply Voltage Data Retention (VCC) Input Voltage (VIN) Output Voltage (VOUT) Active State 3-STATE Operating Temperature (TA) Input Rise and Fall Time (tr, tf) VCC VCC VCC 1.8V, 2.5V r 0.2V 3.3V r 0.3V 5.0V r 0.5V 0 ns/V to 20 ns/V 0 ns/V to 10 ns/V 0 ns/V to 5 ns/V 300qC/W 425qC/W 0V to VCC 0V to 5.5V 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V 40qC to 85qC Thermal Resistance (TJA) SOT23-5 SC70-5 Note 2: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 3: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Output Voltage 1.65 1.8 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOZ IOFF ICC Input Leakage Current 3-STATE Output Leakage Power Off Leakage Current Quiescent Supply Current 0 to 5.5 1.65 to 5.5 0.0 1.65 to 5.5 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 1.65 1.8 2.3 3.0 4.5 1.52 2.15 2.80 2.68 4.20 0.0 0.0 0.0 0.0 0.0 0.08 0.10 0.15 0.22 0.22 0.1 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 Min 0.7 VCC 0.25 VCC 0.3 VCC 1.55 1.7 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.0 0.1 0.1 0.1 0.1 0.24 0.3 0.4 0.55 0.55 V IOL IOL IOL IOL IOL 4 mA 8 mA 16 mA 24 mA 32 mA V VIN VIL IOL 100 PA V IOH IOH IOH IOH IOH V VIN VIH IOH 1.65 to 1.95 0.75 VCC TA 25qC Typ Max TA 40qC to 85qC Min Max Units Conditions 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC V V 100 PA 4 mA 8 mA 16 mA 24 mA 32 mA r1 r1 1 2.0 r10 r10 10 20 PA PA PA PA 0 d VIN d 5.5V VIN VIH or VIL 5.5V 0 d VO d 5.5V VIN or VOUT VIN 5.5V, GND 3 www.fairchildsemi.com NC7SZ125 AC Electrical Characteristics Symbol tPLH tPHL Parameter Propagation Delay VCC (V) 1.65 1.8 2.5 r 0.2 3.3 r 0.3 5.0 r 0.5 tPLH tPHL tPZL tPZH Output Enable Time Propagation Delay 3.3 r 0.3 5.0 r 0.5 1.65 1.8 2.5 r 0.2 3.3 r 0.3 5.0 r 0.5 tPLZ tPHZ Output Disable Time 1.65 1.8 2.5 r 0.2 3.3 r 0.3 5.0 r 0.5 CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance 0 0 3.3 5.0 Min 2.0 2.0 0.8 0.5 0.5 1.5 0.8 2.0 2.0 1.5 1.5 0.8 2.0 2.0 1.5 1.0 0.5 TA 25qC Typ 6.4 5.3 3.4 2.5 2.1 3.2 2.6 8.4 7.0 4.6 3.5 2.8 6.5 5.4 3.5 2.8 2.1 4 8 17 24 Max 13.2 11.0 7.5 5.2 4.5 5.7 5.0 15.0 12.5 8.5 6.2 5.5 13.2 11 8 5.7 4.7 TA 40qC to 85qC Min 2.0 2.0 0.8 0.5 0.5 1.5 0.8 2.0 2.0 1.5 1.5 0.8 2.0 2.0 1.5 1.0 0.5 Max 13.8 11.5 8.0 5.5 4.8 6.0 5.3 15.6 13 9 6.5 5.8 14.5 12 8.5 6 5.0 Units Conditions Figure Number CL ns RD S1 CL S1 CL RU ns S1 S1 VIN CL RU ns S1 S1 VIN pF pF 15 pF, 1 M:, OPEN 50 pF, RD OPEN 50 pF, RD 500: GND for tPZH VIN for tPZL 2 x VCC 50 pF, RD 500: GND for tPHZ VIN for tPLZ 2 x VCC 500: Figures 1, 3 500: Figures 1, 3 500:, Figures 1, 3 ns Figures 1, 3 (Note 4) Figure 2 Note 4: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD (CPD)(VCC)(fIN)  (ICCstatic). AC Loading and Waveforms CL includes load and stray capacitance Input PRR 1.0 MHz; tW 500 ns FIGURE 1. AC Test Circuit Input PRR AC Waveform; tr tf 1.8 ns; 50% 10 MHz; Duty Cycle FIGURE 2. ICCD Test Circuit FIGURE 3. AC Waveforms www.fairchildsemi.com 4 NC7SZ125 Tape and Reel Specification TAPE FORMAT FOR SOT23, SC70 Package Tape Designator M5X, P5X Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Package SC70-5 SOT23-5 Tape Size 8 mm 8 mm DIM A 0.093 (2.35) 0.130 (3.3) DIM B 0.096 (2.45) 0.130 (3.3) DIM F (3.5 r 0.10) (3.5 r 0.05) DIM Ko (1.35 r 0.10) (1.4 r 0.11) DIM P1 0.157 (4) 0.157 (4) DIM W 0.315 r 0.004 (8 r 0.1) 0.315 r 0.012 (8 r 0.3) 0.138 r 0.004 0.053 r 0.004 0.138 r 0.002 0.055 r 0.004 5 www.fairchildsemi.com NC7SZ125 Tape and Reel Specification TAPE FORMAT FOR MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) (Continued) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331  0.059/0.000 (8.40  1.50/0.00) W2 0.567 (14.40) W3 W1  0.078/0.039 (W1  2.00/1.00) www.fairchildsemi.com 6 NC7SZ125 Physical Dimensions inches (millimeters) unless otherwise noted 5-Lead SOT23, JEDEC MO-178, 1.6mm Package Number MA05B 7 www.fairchildsemi.com NC7SZ125 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide Package Number MAA05A www.fairchildsemi.com 8 NC7SZ125 TinyLogic£ UHS Buffer with 3-STATE Output Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 9 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com
NC7SZ125P5X_NL
1. 物料型号: - NC7SZ125M5X:5引脚SOT23封装,JEDEC MO-178标准,1.6mm。 - NC7SZ125M5X_NL:无铅5引脚SOT23封装,JEDEC MO-178标准,1.6mm。 - NC7SZ125P5X:5引脚SC70封装,EIAJ SC-88a标准,1.25mm宽。 - NC7SZ125P5X_NL:无铅5引脚SC70封装,EIAJ SC-88a标准,1.25mm宽。 - NC7SZ125L6X:6引脚MicroPak封装,1.0mm宽。

2. 器件简介: NC7SZ125是Fairchild的Ultra High Speed系列TinyLogic中的单缓冲器,具有3态输出。该器件采用先进的CMOS技术制造,能够在保持低静态功耗的同时实现超高速和高输出驱动,适用于1.65V至5.5V的宽电压范围。

3. 引脚分配: - A, OE:输入引脚。 - Y:输出引脚。 - NC:无连接引脚。

4. 参数特性: - 封装类型:SOT23、SC70和MicroPak。 - 速度:典型值为2.6ns的传播延迟(tPD)。 - 输出驱动:在3V VCC下可达到24mA。 - 电压范围:1.65V至5.5V。 - 与3.3V VCC下工作的LCX性能匹配。 - 高阻态输入/输出,过压容忍输入,有助于5V至3V的信号转换。 - 实现专利的降噪/EMI减少电路。

5. 功能详解: NC7SZ125是一个具有3态输出的缓冲器,能够在不需要输出时将输出设置为高阻态(Z状态)。这允许多个缓冲器共享同一总线线,而不会相互干扰。

6. 应用信息: 该器件适用于需要高速信号传输和低功耗的应用,如逻辑电平转换、总线驱动等。

7. 封装信息: - SOT23:5引脚小外形封装,适用于空间受限的应用。 - SC70:5引脚小外形封装,更窄的宽度适合高密度封装。 - MicroPak:无铅6引脚封装,适用于超小型应用。
NC7SZ125P5X_NL 价格&库存

很抱歉,暂时无法提供与“NC7SZ125P5X_NL”相匹配的价格&库存,您可以联系我们找货

免费人工找货