NC7WV07L6X

NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) June 2006 NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Features ■ 0.9V to 3.6V VCC supply operation ■ 3.6V overvoltage tolerant I/O’s at VCC from 0.9V to General Description The NC7WV07 is a dual buffer with open drain output from Fairchild's Ultra Low Power-A series of TinyLogic. ULP-A is ideal for applications that require extreme high speed, high drive and low power. This product is designed for a wide low voltage operating range (0.9V to 3.6V VCC) and applications that require more drive and speed than the TinyLogic ULP series, but still offer best in class low power operation. The NC7WV07 is uniquely designed for optimized power and speed, and is fabricated with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation. 3.6V ■ Extremely High Speed tPD ■ ■ ■ ■ ■ – 1.0 ns typ for 2.7V to 3.6V VCC – 1.2 ns typ for 2.3V to 2.7V VCC – 2.0 ns typ for 1.65V to 1.95V VCC – 3.2 ns typ for 1.4V to 1.6V VCC – 6.0 ns typ for 1.1V to 1.3V VCC – 13.0 ns typ for 0.9V VCC Power-Off high impedance inputs and outputs High Static Drive (IOH/IOL) – ±24 mA @ 3.00V VCC – ±18 mA @ 2.30V VCC – ±6 mA @ 1.65V VCC – ±4 mA @ 1.4V VCC – ±2 mA @ 1.1V VCC – ±0.1 mA @ 0.9V VCC Uses patented Quiet Series noise/EMI reduction circuitry Ultra small MicroPak leadfree package Ultra low dynamic power Ordering Information Order Number NC7WV07P6X NC7WV07L6X Package Number MAA06A MAC06A Package Code Top Mark V07 BC Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 5k Units on Tape and Reel Battery Life vs. VCC Supply Voltage 700 600 ULP (SA) 500 Battery Life 400 (Days) 300 ULP-A (SV) 200 UHS (SZ) 100 0 0.9 1.2 1.5 1.8 2.5 3.3 5.0 VCC Supply Voltage TinyLogic ULP and ULP-A with up to 50% less power consumption can extend your battery life significantly. Battery Life = (Vbattery • Ibattery • 0.9) / (Pdevice) / 24hrs/day Where, Pdevice = (ICC • VCC) + (CPD + CL) • VCC2 • f Assumes ideal 3.6V Lithium Ion battery with current rating of 900mAH and derated 90% and device frequency at 10MHz, with CL = 15pF load. TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation. MicroPak™ and Quiet Series™ are trademarks of Fairchild Semiconductor Corporation. ©2006 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com NC7WV07 Rev. 1.0.0 NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Logic Symbol IEEE/IEC A1 A2 1 Y1 Y2 Connection Diagrams Pin Assignment for SC70 A1 GND A2 1 6 Pin Descriptions Pin Name A1, A2 Y1 VCC Y2 Description Data Inputs Outputs Y1, Y2 2 5 3 4 Function Table Y=A Input A L H (Top View) Output Y L H L = LOW Logic Level Pin One Orientation Diagram (Top View) AAA H = HIGH Logic Level Pin One AAA represents Product Code Top Mark – see ordering code Note: Orientation of Top Mark determines Pin One location. Read the Top Product Code Mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak A1 GND A2 1 2 3 6 5 4 Y1 VCC Y2 (Top Through View) 2 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Absolute Maximum Ratings The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Symbol VCC VIN VOUT Supply Voltage DC Input Voltage DC Output Voltage HIGH or LOW State(1) VCC = 0V Parameter Rating −0.5V to +4.6V −0.5V to +4.6V −0.5V to VCC +0.5V −0.5V to +4.6V ±50mA −50mA +50mA ±50mA ±50mA −65°C to +150°C IIK IOK DC Input Diode Current @ VIN < 0V DC Output Diode Current VOUT < 0V VOUT > VCC DC Output Source/Sink Current DC VCC or Ground Current per Supply Pin Storage Temperature Range IOH/IOL ICC or Ground TSTG Recommended Operating Conditions(2) Symbol VCC VIN VOUT Supply Voltage Input Voltage Output Voltage VCC = 0.0V HIGH or LOW State Output Current in IOH/IOL VCC = 3.0V to 3.6V VCC = 2.3V to 2.7V VCC = 1.65V to 1.95V VCC = 1.4V to 1.6V VCC = 1.1V to 1.3V VCC = 0.9V Free Air Operating Temperature Minimum Input Edge Rate @ VIN = 0.8V to 2.0V, VCC = 3.0V Parameter Rating 0.9V to 3.6V 0V to 3.6V 0V to 3.6V 0V to VCC ±24mA ±18mA ±6mA ±4mA ±2mA ±0.1mA −40°C to +85°C 10ns/V IOH/IOL TA ∆t / ∆V Notes: 1. IO Absolute Maximum Rating must be observed. 2. Unused inputs must be held HIGH or LOW. They may not float. 3 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) DC Electrical Characteristics TA = +25°C Symbol VIH −40°C to +85°C Min. 0.65 x VCC 0.65 x VCC 0.65 x VCC 0.65 x VCC 1.6 2.0 – – – – – – – – – – – – – – – – – – – – – – Parameter HIGH Level Input Voltage Conditions VCC (V) 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 Min. 0.65 x VCC 0.65 x VCC 0.65 x VCC 0.65 x VCC 1.6 2.0 – – – – – – – – – – – – – – – – – – – – – – Max. – – – – – – 0.35 x VCC 0.35 x VCC 0.35 x VCC 0.35 x VCC 0.7 0.8 0.1 0.1 0.2 0.2 0.2 0.2 0.25 x VCC 0.25 x VCC 0.3 0.4 0.4 0.6 0.4 0.55 ±0.1 0.5 Max. – – – – – – 0.35 x VCC 0.35 x VCC 0.35 x VCC 0.35 x VCC 0.7 0.8 0.1 0.1 0.2 0.2 0.2 0.2 0.25 x VCC 0.25 x VCC 0.3 0.4 0.4 0.6 0.4 0.55 ±0.5 0.5 Units V VIL LOW Level Input Voltage 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 V VOL LOW Level Output Voltage IOL = 100µA 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 V IOL = 2mA IOL = 4mA IOL = 6mA IOL = 12mA IOL = 18mA IOL = 24mA IIN IOFF Input Leakage 0 ≤ VI ≤ 3.6V Current Power Off Leakage Current Quiescent Supply Current 0 ≤ (VI, VO) ≤ 3.6V VI = VCC or GND VCC ≤ VI ≤ 3.6V 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 1.65 ≤ VCC ≤ 1.95 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 2.30 ≤ VCC < 2.70 2.70 ≤ VCC ≤ 3.60 2.70 ≤ VCC ≤ 3.60 0.90 to 3.60 0 µA µA ICC 0.90 to 3.60 0.90 to 3.60 – – 0.9 – – – 0.9 ±0.9 µA 4 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) AC Electrical Characteristics TA = +25°C Symbol tPZL, tPLZ −40°C to +85°C Min. Max. Parameter Propagation Delay Conditions CL = 15pF, RU = RD 1MΩ CL = 15pF, RU = RD 2kΩ VCC (V) 0.90 1.10 ≤ VCC ≤ 1.30 1.40 ≤ VCC ≤ 1.60 Min. Typ. Max. 13 2.0 1.0 1.0 0.7 0.5 – – – 6.0 3.2 2.0 1.2 1.0 2.0 6.5 10 15.0 8.7 6.0 3.6 3.3 – – – Figure Units Number ns Figure 1 Figure 2 1.0 1.0 1.0 0.6 0.4 – – – 18.6 9.7 6.8 4.7 4.0 – – – pF pF pF CL = 30pF, 1.65 ≤ VCC ≤ 1.95 RU = RD 500Ω 2.30 ≤ V < 2.70 CC 2.70 ≤ VCC ≤ 3.60 CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance VI = 0V or VCC, f = 10MHz 0 0 0.90 to 3.60 AC Loading and Waveforms VCC TEST SIGNAL 1000Ω DUT OPEN GND tPLH, tPHL tPZH, tPHZ 6.0V or VCC x 2 tPZL, tPLZ 30pF 1000Ω Figure 1. AC Test Circuit Test tPZL, tPLZ Switch 6V at VCC = 3.3 ± 0.3V; VCC × 2 at VCC = 0.9V − 2.7V tr = 3ns 90% 90% tf = 3ns VCC Input 10% Vmi tW tPZL Vmi 10% tPLZ GND VCC VOH Output 50% VX VCC Figure 2. Waveform for Inverting and Non-Inverting Functions VCC Symbol Vmi Vx 3.3V ± 0.3V 1.5V VOL + 0.3V 2.5V ± 0.2V 1.8V ± 0.15V 1.5V ± 0.1V VCC / 2 VCC / 2 VCC / 2 VOL + 0.1V VOL + 0.15V VOL + 0.15V 1.2 V ± 0.1V VCC / 2 VOL + 0.1V 0.9V VCC / 2 VOL + 0.1V 5 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Tape and Reel Specification Tape Format for SC70 Package Designator P6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimension inches (millimeters) 6 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Tape and Reel Specification (Continued) Tape Format for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ) 5000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimension millimeters 7 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Tape and Reel Specification (Continued) Reel Dimension for MicroPak inches (millimeters) Tape Size 8mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) W2 0.567 (14.40) W3 W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 8 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Physical Dimensions millimeters unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A 9 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) Physical Dimensions millimeters unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A 10 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com NC7WV07 TinyLogic® ULP-A Dual Buffer (Open Drain Output) TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® FASTr™ ActiveArray™ FPS™ Bottomless™ FRFET™ Build it Now™ GlobalOptoisolator™ CoolFET™ GTO™ CROSSVOLT™ HiSeC™ DOME™ I2C™ EcoSPARK™ i-Lo™ E2CMOS™ ImpliedDisconnect™ EnSigna™ IntelliMAX™ FACT™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UniFET™ UltraFET® VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILDíS WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I19 Preliminary No Identification Needed Full Production Obsolete Not In Production 11 NC7WV07 Rev. 1.0.0 www.fairchildsemi.com