NC7WZ125

NC7WZ125 TinyLogic UHS Dual Buffer with 3-STATE Outputs March 2001 Revised January 2005 NC7WZ125 TinyLogic UHS Dual Buffer with 3-STATE Outputs General Description The NC7WZ125 is a Dual Non-Inverting Buffer with independent active LOW enables for the 3-STATE outputs. The Ultra High Speed device is fabricated with advanced CMOS technology to achieve superior switching performance with high output drive while maintaining low static power dissipation over a broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC operating range. The inputs and outputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 5.5V independent of VCC operating range. Outputs tolerate voltages above VCC when in the 3-STATE condition. Features s Space saving US8 surface mount package s MicroPak Pb-Free leadless package s Ultra High Speed; tPD 2.6 ns typ into 50 pF at 5V VCC s High Output Drive; ±24 mA at 3V VCC s Broad VCC Operating Range; 1.65V to 5.5V s Matches the performance of LCX when operated at 3.3V VCC s Power down high impedance inputs/outputs s Overvoltage tolerant inputs facilitate 5V to 3V translation s Outputs are overvoltage tolerant in 3-STATE mode s Patented noise/EMI reduction circuitry implemented Ordering Code: Order Number Product Package Code Top Number Mark WZ25 P3 MAC08A Package Description Supplied As NC7WZ125K8X MAB08A NC7WZ125L8X 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel Pb-Free 8-Lead MicroPak, 1.6 mm Wide 5k Units on Tape and Reel Pb-Free package per JEDEC J-STD-020B. Logic Symbol IEEE/IEC Connection Diagrams Pin Descriptions Pin Names OEn An Yn Description Enable Inputs for 3-STATE Outputs Input 3-STATE Outputs (Top View) Pad Assignments for MicroPak Function Table Inputs OE L L H H H = HIGH Logic Level Output An L H L H Yn L H Z Z Z = 3-STATE MicroPak is a trademark of Fairchild Semiconductor Corporation. (Top Thru View) L = LOW Logic Level TinyLogic is a registered trademark of Fairchild Semiconductor Corporation. © 2005 Fairchild Semiconductor Corporation DS500396 www.fairchildsemi.com NC7WZ125 Absolute Maximum Ratings(Note 1) Supply Voltage (VCC) DC Input Voltage (VIN) (Note 2) DC Output Voltage (VOUT) DC Input Diode Current (IIK) @VIN < 0V DC Output Diode Current (IOK) @VOUT < 0V DC Output Source/Sink Current (IOUT) DC VCC/Ground Current (ICC/IGND) Storage Temperature Range (TSTG) Junction Lead Temperature under Bias (TJ) Junction Lead Temperature (TL) (Soldering, 10 seconds) Power Dissipation (PD) @ +85°C −0.5V to +7V −0.5V to +7V −0.5V to +7V −50 mA −50 mA ± 50 mA ± 100 mA −65°C to +150°C +150°C +260°C 250 mW Recommended Operating Conditions (Note 3) Supply Voltage Operating (VCC) Supply Voltage Data Retention (VCC) Input Voltage (VIN) Output Voltage (VOUT ) Active State 3-STATE Operating Temperature (TA) Input Rise and Fall Time (tr, tf) VCC @ 1.8V, 0.15V, 2.5V ± 0.2V VCC @ 3.3V ± 0.3V VCC @ 5.0V ± 0.5V Thermal Resistance (θJA) 0 ns/V to 20 ns/V 0 ns/V to 10 ns/V 0 ns/V to 5 ns/V 250°C/W 0V to VCC 0V to 5.5V 1.65V to 5.5V 1.5V to 5.5V 0V to 5.5V −40°C to +85°C Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifications should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading variables. Fairchild does not recommend operation outside datasheet specifications. Note 2: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 3: Unused inputs must be held HIGH or LOW. They may not float. DC Electrical Characteristics Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage VCC (V) 2.3 to 5.5 1.65 to 1.95 2.3 to 5.5 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 VOL LOW Level Output Voltage 1.65 2.3 3.0 4.5 1.65 2.3 3.0 3.0 4.5 IIN IOZ IOFF ICC Input Leakage Current 3-STATE Output Leakage Power Off Leakage Current Quiescent Supply Current 0 to 5.5 1.65 to 5.5 0.0 1.65 to 5.5 1.55 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 1.65 2.3 3.0 4.5 1.52 2.15 2.80 2.68 4.20 0.0 0.0 0.0 0.0 0.08 0.10 0.15 0.22 0.22 0.10 0.10 0.10 0.10 0.24 0.3 0.4 0.55 0.55 ±0.1 ±0.5 1 1 Min 0.7 VCC 0.25 VCC 0.3 VCC 1.55 2.2 2.9 4.4 1.29 1.9 2.4 2.3 3.8 0.10 0.10 0.10 0.10 0.24 0.3 0.4 0.55 0.55 ±1 ±5 10 10 µA µA µA µA V IOL = 4 mA IOL = 8 mA IOL = 16 mA IOL = 24 mA IOL = 32 mA VIN = 5.5V, GND VIN = VIH or VIL 0 ≤ VOUT ≤ 5.5V VIN or VOUT = 5.5V VIN = 5.5V, GND V VIN = VIH IOL = 100 µA or VIL V or VIL IOH = −4 mA VIN = VIH IOH = −8 mA IOH = −16 mA IOH = −24 mA IOH = −32 mA V VIN = VIH IOH = −100 µA or VIL 1.65 to 1.95 0.75 VCC TA = +25°C Typ Max TA = −40°C to +85°C Min 0.75 VCC 0.7 VCC 0.25 VCC 0.3 VCC Max Units V V Conditions www.fairchildsemi.com 2 NC7WZ125 Noise Characteristics Symbol Parameter VCC (V) 5.0 5.0 5.0 5.0 5.0 TA = + 25°C Typ Max 1.0 1.0 4.0 3.5 1.5 Units V V V V V Conditions CL = 50 pF CL = 50 pF CL = 50 pF CL = 50 pF CL = 50 pF VOLP (Note 4) Quiet Output Maximum Dynamic VOL VOLV (Note 4) Quiet Output Minimum Dynamic VOL VOHV (Note 4) Quiet Output Minimum Dynamic VOH VIHD (Note 4) VILD (Note 4) Minimum HIGH Level Dynamic Input Voltage Maximum LOW Level Dynamic Input Voltage Note 4: Parameter guaranteed by design. AC Electrical Characteristics Symbol tPLH, tPHL Parameter Propagation Delay AN to YN VCC (V) 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 tPLH, tPHL tOSLH, tOSHL tPZL, tPZH Propagation Delay AN to YN Output to Output Skew (Note 5) Output Enable Time 3.3 ± 0.3 5.0 ± 0.5 3.3 ± 0.3 5.0 ± 0.5 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.5 ± 0.5 tPLZ, tPHZ Output Disable Time 1.8 ± 0.15 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 CIN COUT CPD Input Capacitance Output Capacitance Power Dissipation Capacitance 0 5.0 3.3 5.0 3.0 1.8 1.2 0.8 2.5 1.5 0.8 0.3 2.5 4 10 12 Min 2.0 1.0 0.8 0.5 1.2 0.8 TA = +25°C Typ Max 12.0 7.5 5.2 4.5 5.7 5.0 1.0 0.8 14.0 8.5 6.2 5.5 12.0 8.0 5.7 4.7 3.0 1.8 1.2 0.8 2.5 1.5 0.8 0.3 TA = −40°C to +85°C Min 2.0 1.0 0.8 0.5 1.2 0.8 Max 13.0 8.0 5.5 4.8 6.0 5.3 1.0 0.8 15.0 9.0 6.5 5.8 13.0 8.5 6.0 5.0 ns ns ns ns CL = 50 pF RD = 500Ω S1= Open CL = 50 pF RD = 500Ω S1= Open CL = 50 pF RD, RU = 500 Ω S1 = GND for tPZH Figures 1, 3 S1 = V for t I PZL Units Conditions CL = 15 pF Figure Number ns RD = 1 MΩ S1= Open Figures 1, 3 Figures 1, 3 Figures 1, 3 VI = 2 x VCC CL = 50 pF RD, RU = 500 Ω S1 = GND for tPZH S1 = VI for tPZL VI = 2 x VCC pF pF (Note 6) Figure 2 Figures 1, 3 Note 5: Parameter guaranteed by design. tOSLH = |tPLHmax − t PLHmin|; tOSHL = |tPHLmax − tPHLmin|. Note 6: CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (C PD)(VCC)(fIN) + (ICCstatic). 3 www.fairchildsemi.com NC7WZ125 AC Loading and Waveforms CL includes load and stray capacitance Input PRR = 1.0 MHz; tw = 500 ns FIGURE 1. AC Test Circuit Input = AC Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50% FIGURE 2. ICCD Test Circuit FIGURE 3. AC Waveforms www.fairchildsemi.com 4 NC7WZ125 Tape and Reel Specification Tape Format for US8 Package Designator K8X Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Tape Section Leader (Start End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Format for MicroPak Package Designator L8X Carrier Tape Section Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Leader (Start End) Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) 5 www.fairchildsemi.com NC7WZ125 Tape and Reel Specification REEL DIMENSIONS inches (millimeters) (Continued) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) W2 0.567 (14.40) W3 W1 + 0.078/−0.039 (W1 + 2.00/−1.00) www.fairchildsemi.com 6 NC7WZ125 Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Package Number MAB08A 7 www.fairchildsemi.com NC7WZ125 TinyLogic UHS Dual Buffer with 3-STATE Outputs Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 8-Lead MicroPak, 1.6 mm Wide Package Number MAC08A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 8 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com