NC7WZU04_06

NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter March 2006 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter General Description The NC7WZU04 is a dual unbuffered inverter from Fairchild’s Ultra High Speed Series of TinyLogic® in the space saving SC70 6-lead package. The special purpose unbuffered circuit design is intended for crystal oscillator or analog applications. The device is fabricated with advanced CMOS technology to achieve ultra high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65V to 5.5V VCC range. The inputs are high impedance when VCC is 0V. Inputs tolerate voltages up to 7V independent of VCC operating voltage. Features ■ Space saving SC70 6-lead package ■ Ultra small MicroPak™ leadless package ■ Unbuffered for crystal oscillator and analog applications ■ Balanced output drive: ±8mA at 4.5V VCC ■ Broad VCC operating range: 1.65V to 5.5V ■ Low quiescent power: ICC < 1µA at 5V VCC, TA = 25°C Ordering Information Order Number NC7WZU04P6X NC7WZU04L6X Package Number MAA06A MAC06A Package Code Top Mark ZU4 B5 Package Description 6-Lead SC70, EIAJ SC88, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide Supplied As 3k Units on Tape and Reel 5k Units on Tape and Reel Logic Symbol IEEE/IEC A1 A2 1 Y1 Y2 TinyLogic® is a registered trademark of Fairchild Semiconductor Corporation. MicroPak™ is a trademark of Fairchild Semiconductor Corporation. ©2006 Fairchild Semiconductor Corporation 1 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Connection Diagrams Pin Assignment for SC70 A1 1 GND A2 2 6 Pin Descriptions Pin Name A1, A2 Y1 VCC Y2 Description Data Inputs Outputs Y1, Y2 5 3 4 Function Table Y=A Input A Output Y H L L = LOW Logic Level (Top View) Pin One Orientation Diagram L H (Top View) AAA H = HIGH Logic Level Pin One AAA represents Product Code Top Mark – see ordering code Note: Orientation of Top Mark determines Pin One location. Read the top product code mark left to right, Pin One is the lower left pin (see diagram). Pad Assignments for MicroPak A1 GND A2 1 2 3 6 5 4 Y1 VCC Y2 (Top Through View) 2 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Absolute Maximum Ratings The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Symbol VCC VIN VOUT IIK IOK Supply Voltage DC Input Voltage DC Output Voltage Parameter Rating −0.5V to +7V −0.5V to +7V −0.5V to +7V −50mA −50mA +50mA ±50mA ±100mA −65°C to +150°C 150°C 260°C 180mW DC Input Diode Current @ VIN ≤ –0.5V DC Output Diode Current @ VOUT < –0.5V VOUT > 0.5V, VCC = GND DC Output Current DC VCC/GND Current Storage Temperature Junction Temperature under Bias Junction Lead Temperature (Soldering, 10 seconds) Power Dissipation @ +85°C IOUT ICC/IGND TSTG TJ TL PD Recommended Operating Conditions(1) Symbol VCC VCC VIN VOUT TA θJA Supply Voltage Operating Supply Voltage Data Retention Input Voltage Output Voltage Operating Temperature Thermal Resistance Parameter Rating 1.8V to 5.5V 1.5V to 5.5V 0V to 5.5V 0V to VCC −40°C to +85°C 350°C/W Note: 1. Unused inputs must be held HIGH or LOW. They may not float. 3 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter DC Electrical Characteristics TA = +25°C -40°C to +85°C Max Min 0.85 VCC 0.8 VCC 0.15 VCC 0.2 VCC 0.15 VCC 0.2 VCC 1.55 1.6 2.1 2.7 4.0 1.29 1.9 2.4 2.3 3.8 0.2 0.2 0.2 0.3 0.5 0.24 0.3 0.4 0.55 0.55 ±0.1 1.0 0.2 0.2 0.2 0.3 0.5 0.24 0.3 0.4 0.55 0.55 ±1.0 10 µA µA mA V V V V V Symbol VIH VIL VOH Parameter HIGH Level Input Voltage LOW Level Input Voltage HIGH Level Output Voltage Conditions VCC (V) 1.8 to 2.7 3.0 to 5.5 1.8 to 2.7 3.0 to 5.5 Min 0.85 VCC 0.8 VCC Typ Max Units V VIN = VIL IOH = -100µA 1.65 1.8 2.3 3.0 4.5 1.55 1.6 2.1 2.7 4.0 1.29 1.9 2.4 2.3 3.8 1.65 1.79 2.29 2.99 4.48 1.52 2.19 2.82 2.73 4.24 0.01 0.01 0.01 0.01 0.01 0.10 0.12 0.19 0.29 0.29 VIN = GND IOH = -2mA IOH = -2mA IOH = -4mA IOH = -6mA IOH = -8mA 1.65 2.3 3.0 3.0 4.5 1.65 1.8 2.3 3.0 4.5 VOL LOW Level Output Voltage VIN = VIH IOL = 100µA VIN = VCC IOL = 2mA IOL = 2mA IOL = 4mA IOL = 6mA IOL = 8mA 1.65 2.3 3.0 3.0 4.5 0 to 5.5 1.65 to 5.5 1.8 2.5 3.3 5.0 IIN ICC Input Leakage Current Quiescent Supply Current VIN = 5.5V, GND VIN = 5.5V, GND VOUT = Open VIN = Adjust for Peak ICC Current ICCPEAK Peak Supply Current in Analog Operation 0.2 2 5 15 4 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter AC Electrical Characteristics TA = +25˚C –40°C to +85°C Symbol Parameter Conditions CL = 15pF, RL = 1MΩ VCC (V) 1.65 1.8 2.5 ± 0.2 3.3 ± 0.3 5.0 ± 0.5 Min 1.5 1.5 1.2 0.8 0.5 1.2 0.8 Typ 5.5 4.6 3.3 2.7 2.2 4.0 3.4 3 3.5 5.5 Max 9.8 8.1 5.7 4.1 3.3 6.4 5.6 Min 1.5 1.5 1.2 0.8 0.5 1.2 0.8 Max 11.0 8.9 6.3 4.5 3.6 7.0 6.2 Figure Units Number ns Figure 1 Figure 3 tPLH, tPHL Propagation Delay CL = 50pF, RL = 500Ω, CIN CPD Input Capacitance Power Dissipation Capacitance Note 2 3.3 ± 0.3 5.0 ± 0.5 0 3.3 5.0 ns pF pF Figure 1 Figure 3 Figure 2 Note: 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. (See Figure 2.) CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD)(VCC)(fIN) + (ICCstatic). AC Loading and Waveforms VCC Input CL* RL tr = 3ns *CL includes load and stray capacitance. Input PRR = 1.0MHz; tW = 500ns VCC Input GND 10% 90% 50% 90% 50% Output tf = 3ns Figure 1. AC Test Circuit VCC A Input tW tPLH 10% tPHL VOH Output VOL 50% 50% Application Note: When operating the NC7WZU04’s unbuffered output stage in its linear range, as in oscillator applications, care must be taken to observe maximum power rating for the device and package. The high drive nature of the design of the output stage will result in substantial simultaneous conduction currents when the stage is in the linear region. See the ICCPEAK specification on page 2. Input = AC Waveform; tr, tf = 1.8ns; PRR = 10MHz; Duty Cycle = 50% Figure 3. AC Waveforms Figure 2. ICCD Test Circuit 5 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Tape and Reel Specification Tape Format for SC70 Package Designator P6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimension inches (millimeters) Package SC70-6 Tape Size 8mm Dim A 0.093 (2.35) Dim B 0.096 (2.45) Dim F Dim KO Dim P1 0.157 (4) Dim W 0.315 ± 0.004 (8 ± 0.1) 0.138 ± 0.004 0.053 ± 0.004 (3.5 ± 0.10) (1.35 ± 0.10) 6 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Tape and Reel Specification (Continued) Tape Format for MicroPak Package Designator L6X Tape Section Leader (Start End) Carrier Trailer (Hub End) Number Cavities 125 (typ) 3000 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed Tape Dimension inches (millimeters) 7 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Tape and Reel Specification (Continued) Reel Dimension for MicroPak inches (millimeters) Tape Size 8 mm A 7.0 (177.8) B 0.059 (1.50) C 0.512 (13.00) D 0.795 (20.20) N 2.165 (55.00) W1 0.331 + 0.059/−0.000 (8.40 + 1.50/−0.00) W2 0.567 (14.40) W3 W1 + 0.078/−0.039 (W1 + 2.00/−1.00) 8 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide Package Number MAA06A 9 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 6-Lead MicroPak, 1.0mm Wide Package Number MAC06A 10 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3 NC7WZU04 TinyLogic® UHS Dual Unbuffered Inverter TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ FAST® ActiveArray™ FASTr™ Bottomless™ FPS™ Build it Now™ FRFET™ CoolFET™ GlobalOptoisolator™ CROSSVOLT™ GTO™ DOME™ HiSeC™ EcoSPARK™ I2C™ 2 E CMOS™ i-Lo™ EnSigna™ ImpliedDisconnect™ FACT™ IntelliMAX™ FACT Quiet Series™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ DISCLAIMER ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyLogic® TINYOPTO™ TruTranslation™ UHC™ UltraFET® UniFET™ VCX™ Wire™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILDíS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component is any component of a life 1. Life support devices or systems are devices or support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I18 11 www.fairchildsemi.com NC7WZU04 Rev. 1.0.3