NM25C040LZVMT8X

NM25C040LZVMT8X

  • 厂商:

    FAIRCHILD(仙童半导体)

  • 封装:

  • 描述:

    NM25C040LZVMT8X - 4K-Bit Serial CMOS EEPROM (Serial Peripheral Interface (SPI) Synchronous Bus) - Fa...

  • 详情介绍
  • 数据手册
  • 价格&库存
NM25C040LZVMT8X 数据手册
NM25C040 4K-Bit Serial CMOS EEPROM (Serial Periphrial Interface (SPI) Synchronous Bus) March 1999 NM25C040 4K-Bit Serial CMOS EEPROM (Serial Peripheral Interface (SPI) Synchronous Bus) General Description The NM25C040 is a 4096-bit CMOS EEPROM with an SPI compatible serial interface. The NM25C040 is designed for data storage in applications requiring both non-volatile memory and insystem data updates. This EEPROM is well suited for applications using the 68HC11 series of microcontrollers that support the SPI interface for high speed communication with peripheral devices via a serial bus to reduce pin count. The NM25C040 is implemented in Fairchild Semiconductor’s floating gate CMOS process that provides superior endurance and data retention. The serial data transmission of this device requires four signal lines to control the device operation: Chip Select (CS), Clock (SCK), Data In (SI), and Serial Data Out (SO). All programming cycles are completely self-timed and do not require an erase before WRITE. BLOCK WRITE protection is provided by programming the STATUS REGISTER with one of four levels of write protection. Additionally, separate WRITE enable and WRITE disable instructions are provided for data protection. Hardware data protection is provided by the WP pin to protect against inadvertent programming. The HOLD pin allows the serial communication to be suspended without resetting the serial sequence. Features s 2.1 MHz clock rate @ 2.7V to 5.5V s 4096 bits organized as 512 x 8 s Multiple chips on the same 3-wire bus with separate chip select lines s Self-timed programming cycle s Simultaneous programming of 1 to 4 bytes at a time s Status register can be polled during programming to monitor READY/BUSY s Write Protect (WP) pin and write disable instruction for both hardware and software write protection s Block write protect feature to protect against accidental writes s Endurance: 1,000,000 data changes s Data retention greater than 40 years s Packages available: 8-pin DIP, 8-pin SO, or 8-pin TSSOP Block Diagram CS HOLD SCK SI Instruction Register Instruction Decoder Control Logic and Clock Generators VCC VSS WP Address Counter/ Register Program Enable VPP EEPROM Array 4096 Bits (512 x 8) High Voltage Generator and Program Timer Decoder 1 of 512 Read/Write Amps Data In/Out Register 8 Bits Data Out Buffer SO Non-Volatile Status Register DS012401-1 © 1999 Fairchild Semiconductor Corporation NM25C040 Rev. D.1 1 www.fairchildsemi.com NM25C040 4K-Bit Serial CMOS EEPROM (Serial Periphrial Interface (SPI) Synchronous Bus) Connection Diagram Dual-In-Line Package (N), SO Package (M8), and TSSOP Package (MT8) CS SO WP VSS 1 2 NM25C040 3 4 6 5 SCK SI DS012401-2 8 7 VCC HOLD Top View See Package Number N08E (N), M08A (M8), and MTC08 (MT8) Pin Names CS SO WP VSS SI SCK HOLD VCC Chip Select Input Serial Data Output Write Protect Ground Serial Data Input Serial Clock Input Suspends Serial Data Power Supply Ordering Information NM 25 C XX LZ E XX Package Letter N M8 MT8 None V E Blank L LZ 040 C W Interface 25 NM Description 8-pin DIP 8-pin SO 8-pin TSSOP 0 to 70°C -40 to +125°C -40 to +85°C 4.5V to 5.5V 2.7V to 4.5V 2.7V to 4.5V and
NM25C040LZVMT8X
物料型号: - 型号为NM25C040,是由Fairchild Semiconductor生产的4K-Bit Serial CMOS EEPROM,使用SPI同步总线。

器件简介: - NM25C040是一款4096位的CMOS EEPROM,具备与SPI兼容的串行接口。设计用于数据系统数据更新,非常适合需要非易失性存储和高速通信接口的场合,如68HC11系列微控制器支持的SPI串行总线以减少引脚数量。

引脚分配: - CS(Chip Select Input):芯片选择输入 - SO(Serial Data Output):串行数据输出 - WP(Write Protect):写保护 - Vss(Ground):地 - SI(Serial Data Input):串行数据输入 - SCK(Serial Clock Input):串行时钟输入 - HOLD(Suspends Serial Data):暂停串行数据 - Vcc(Power Supply):电源供电

参数特性: - 工作电压:2.7V至5.5V - 时钟频率:2.1 MHz - 组织方式:4096位,512字节x 8位 - 可以在同一个3线总线上使用多个芯片,每个芯片有单独的芯片选择线 - 自我计时编程周期,支持1到4字节的一次编程 - 写保护(WP)引脚和写禁用指令,提供硬件和软件写保护 - 块写保护功能,防止意外写入 - 数据保持超过40年,耐擦写次数为100万次 - 封装形式:8脚DIP、8脚SO或8脚TSSOP

功能详解: - 提供了指令集,包括写使能(WREN)、写禁用(WRDI)、读状态寄存器(RDSR)、写状态寄存器(WRSR)、读数据(READ)和写数据(WRITE)指令。 - 支持通过SPI接口的主从模式通信,其中NM25C040始终作为从设备。 - 支持HOLD引脚以暂停和恢复串行通信。 - 提供了块写保护功能,可以通过编程状态寄存器选择保护级别。

应用信息: - 适用于需要非易失性存储和高速通信接口的场合,如微控制器的外围设备高速通信。

封装信息: - 提供8脚DIP、8脚SO或8脚TSSOP三种封装形式。
NM25C040LZVMT8X 价格&库存

很抱歉,暂时无法提供与“NM25C040LZVMT8X”相匹配的价格&库存,您可以联系我们找货

免费人工找货