RS1B

RS1A-RS1M Discrete POWER & Signal Technologies RS1A - RS1M 0.181 (4.597) 0.157 (3.988) Features • • • Glass passivated junction. For surface mounted applications. Built in strain relief, ideal for automated placement. 0.062 (1.575) 0.055 (1.397) 2 1 0.114 (2.896) 0.098 (2.489) 0.208 (5.283) 0.188 (4.775) SMA/DO-214AC COLOR BAND DENOTES CATHODE 0.096 (2.438) 0.078 (1.981) 1.0 Ampere Fast Recovery Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) TA = 25°C unless otherwise noted 0.060 (1.524) 0.030 (0.762) 0.008 (0.203) 0.004 (0.102) 0.012 (0.305) 0.006 (0.152) Parameter Average Rectified Current @ TA = 100°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient ** Thermal Resistance, Junction to Case ** Storage Temperature Range Operating Junction Temperature Value 1.0 Units A 30 1.19 9.5 105 32 -55 to +150 -55 to +150 A W mW/°C °C/W °C/W °C °C PD RθJA RθJC Tstg TJ *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics Parameter 1A Peak Repetitive Reverse Voltage Maximum RMS Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Current @ rated VR TA = 25°C TA = 125°C Maximum Forward Voltage @ 1.0 A Maximum Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A Typical Junction Capacitance VR = 4.0 V, f = 1.0 MHz 50 35 50 TA = 25°C unless otherwise noted Device 1B 100 70 100 1D 200 140 200 1G 400 280 400 5.0 50 1.3 150 10 250 500 1J 600 420 600 1K 800 560 800 1M 1000 700 1000 Units V V V µA µA V nS pF ©1999 Fairchild Semiconductor Corporation RS1A-RS1M, Rev. A RS1A-RS1M Fast Recovery Rectifiers (continued) Typical Characteristics Forward Current Derating Curve 1.6 FORWARD CURRENT (A) 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE ( º C) 175 RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 0.2 x 0.2" (5.0 x 5.0 mm) COPPER PAD AREAS Non-Repetitive Surge Current PEAK FORWARD SURGE CURRENT (A) 30 25 20 15 10 5 0 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 F orward Characteristics 10 REVERSE CURRENT ( µ A) FORWARD CURRENT (A) 10 Reverse Characteristics T A = 125 º C T A = 125 º C 1 T A = 100 º C 1 0.1 TA = 2 5º C 0.1 Pulse Width = 300µs 2% Duty Cycle 0.01 TA = 2 5º C 0.01 0.4 0.001 0.6 0.8 1 1.2 1.4 FORWARD VOLTAGE (V) 1.6 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE (%) Junction Capacitance 50 CAPACITANCE (pF) 20 10 5 1 1 2 5 10 20 REVERSE VOLTAGE (V) 50 100 RS1A-RS1M, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.