SL5583.W

6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNX82A.W, CNX83A.W, SL5582.W & SL5583.W DESCRIPTION The CNX82A.W, CNX83A.W, SL5582.W AND SL5583.W, consist of a gallium arsenide infrared emitting diode driving a silicon phototransistor in a 6-pin dual in-line package. PACKAGE DIMENSIONS FEATURES • Input/Output pin distance 10.16 mm • UL recognized (File # E90700) 0.270 (6.86) 0.240 (6.10) APPLICATIONS • Power supply regulators • Digital logic inputs • Microprocessor inputs SCHEMATIC 1 NC 6 1 6 1 SEATING PLANE 0.350 (8.89) 0.330 (8.38) 0.070 (1.78) 0.045 (1.14) 6 0.200 (5.08) 0.115 (2.92) 2 5 2 5 0.154 (3.90) 0.100 (2.54) 0.004 (0.10) MIN 0.016 (0.40) 0.008 (0.20) 3 NC CNX82A.W SL5582.W 4 3 NC CNX83A.W SL5583.W 4 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) TYP 0° to 15° 0.400 (10.16) TYP PIN 1. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR 6. NO CONNECTION PIN 1. ANODE 2. CATHODE 3. NO CONNECTION 4. EMITTER 5. COLLECTOR 6. BASE NOTE All dimensions are in inches (millimeters) ABSOLUTE MAXIMUM RATINGS Parameter TOTAL DEVICE Storage Temperature Operating Temperature Lead Solder Temperature Junction Temperature Total Device Power Dissipation @ TA = 25°C EMITTER DC/Average Forward Input Current Reverse Input Voltage Forward Current - Peak (1µs pulse, 300pps) LED Power Dissipation @ TA = 25°C Derate above 25°C DETECTOR Collector-Emitter Voltage Collector-Base Voltage (CNX83A) Emitter-Collector Voltage Continuous Collector Current Detector Power Dissipation @ TA = 25°C Derate above 25°C Symbol TSTG TOPR TSOL TJ PD IF VR IF(pk) PD VCEO VCBO VECO IC PD Value -55 to +150 -55 to +100 260 for 10 sec 125 250 100 5.0 3.0 140 1.33 50 70 7 100 150 2.0 Units °C °C °C °C mW mA V A mW mW/°C V V V mA mW mW/°C 4/13/00 200024D 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNX82A.W, CNX83A.W, SL5582.W & SL5583.W ELECTRICAL CHARACTERISTICS (TA = 25°C Unless otherwise specified.) INDIVIDUAL COMPONENT CHARACTERISTICS Parameter EMITTER Input Forward Voltage Reverse Leakage Current DETECTOR Collector-Emitter Breakdown Voltage Collector-Base Breakdown Voltage Emitter-Collector Breakdown Voltage Test Conditions (IF = 10 mA) (VR = 5.0 V) (IC = 1.0 mA, IF = 0) (IC = 100 µA, IF = 0) (IE = 100 µA, IF = 0) (VCE = 10 V, IF = 0) (VCE = 10 V, IF = 0) Collector-Emitter Dark Current (TA = 70°C) (VCE = 10 V, IF = 0) (TA = 100°C) Collector-Base Dark Current Capacitance Note ** Typical values at TA = 25°C (VCB = 10 V) (VCE = 0 V, f = 1 MHz) ICBO CCE ICEO Symbol VF IR BVCEO BVCBO BVECO Device ALL ALL ALL CNX83A.W SL5583.W ALL ALL CNX82A.W CNX83A.W SL5582.W SL5583.W SL5582.W SL5583.W CNX83A.W SL5583.W ALL 8 50 70 7 Min Typ** 1.2 0.001 100 120 10 0.001 0.5 0.050 10 0.5 50 20 nA pF µA Max 1.50 10 Unit V µA V V V Call QT Optoelectronics for more information or the phone number of your nearest distributor. United States 800-533-6786 • France 33 [0] 1.45.18.78.78 • Germany 49 [0] 89/96.30.51 • United Kingdom 44 [0] 1296 394499 • Asia/Pacific 603-7352417 4/13/00 200024D 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNX82A.W, CNX83A.W, SL5582.W & SL5583.W TRANSFER CHARACTERISTICS DC Characteristic (TA = 25°C Unless otherwise specified.) Test Conditions (IF = 10 mA, VCE = 0.4 V) Symbol Device ALL CNX82A.W (IF = 10 mA, VCE = 5 V) CNX83A.W SL5582.W SL5583.W Current Transfer Ratio, Collector-Emitter (IF = 10 mA, VCE = 5 V) (TA = 100°C) (IF = 1 mA, VCE = 5 V) (IF = 2 mA, VCE = 5 V) (IF = 2 mA, VCE = 5 V) (TA = 100°C) Saturation Voltage (IF = 10 mA, IC = 4 mA) (IC = 2 mA, VCC = 5 V, RL = 100 !) Turn-on Time (IC = 2 mA, VCC = 5 V, RL = 1 k!) (IF = 16 mA, VCC = 5 V, RL = 1 k!) (IC = 2 mA, VCC = 5 V, RL = 100 !) Turn-off Time (IC = 2 mA, VCC = 5 V, RL = 1 k!) (IF = 16 mA, VCC = 5 V, RL = 1 k!) toff ton VCE(sat) CTR SL5582.W SL5583.W CNX82A.W CNX83A.W SL5582.W SL5583.W SL5582.W SL5583.W ALL ALL ALL SL5582.W SL5583.W ALL ALL SL5582.W SL5583.W 3 12 50 µs Min 40 40 40 25 10 20 15 0.19 3 12 20 µs 0.4 V 250 320 320 100 Typ** Max Units % ISOLATION CHARACTERISTICS Characteristic Input-Output Isolation Voltage Isolation Resistance Isolation Capacitance External air gap (clearance) External tracking path (creepage) Internal plastic gap (clearance) Note ** Typical values at TA = 25°C Test Conditions (II-O "#1 µA, 1 min.) (VI-O = 500 VDC) (VI-O = $, f = 1 MHz) Symbol VISO RISO CISO 9.6 8.0 1.0 Min 5300 1011 0.5 Typ** Max Units Vac(rms) ! pf mm mm mm ORDERING INFORMATION Order Entry Identifier .300W Option 300 Description VDE 0884 4/13/00 200024D 6-PIN PHOTOTRANSISTOR OPTOCOUPLERS CNX82A.W, CNX83A.W, SL5582.W & SL5583.W TYPICAL CHARACTERISTICS 2 VF, FORWARD VOLTAGE (VOLTS) PULSE ONLY PULSE OR DC IC, OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 1.8 NORMALIZED TO: IF = 10 mA 1 1.6 1.4 TA = -55˚C 1.2 25˚C 100˚C 1 10 100 1000 IF, LED FORWARD CURRENT (mA) 0.1 1 0.01 0.5 1 2 5 10 20 50 IF, LED INPUT CURRENT (mA) Figure 1. LED Forward Voltage versus Forward Current Figure 2. Output Current versus Input Current 25 IC, COLLECTOR CURRENT (mA) IF = 10 mA 20 IC, OUTPUT COLLECTOR CURRENT (NORMALIZED) 10 7 5 NORMALIZED TO TA = 25˚C 2 1 0.7 0.5 15 10 5 0.2 0.1 -60 -40 -20 0 20 40 60 80 100 0 0 1 2 3 4 5 6 7 8 9 10 VCE - COLLECTOR-EMITTER VOLTAGE (V) TA, AMBIENT TEMPERATURE (˚C) Figure 3. Collector Current versus Collector-Emitter Voltage Figure 4. Output Current versus Ambient Temperature ICEO, COLLECTOR-EMITTER DARK CURRENT (NORMALIZED) 1000 NORMALIZED TO: VCE = 10 V TA = 25˚C 20 18 16 C, CAPACITANCE (pF) 14 12 10 8 6 4 2 40 60 80 100 0 0.05 0.1 0.2 0.5 1 2 5 10 20 50 CCE CLED f = 1 MHz 100 10 VCE = 30 V 1 10V 0.1 0 20 TA, AMBIENT TEMPERATURE (˚C) V, VOLTAGE (VOLTS) Figure 5. Dark Current versus Ambient Temperature Figure 6. Capacitance versus Voltage 4/13/00 200024D SUPER BRIGHT PLCC-2 PACKAGE SURFACE MOUNT LED LAMP SURFACE MOUNT LED LAMP DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com © 2000 Fairchild Semiconductor Corporation 4 of 4 12/6/00 300089B