SMBJ10A

SMBJ5.0(C)A - SMBJ170(C)A SMBJ5.0(C)A - SMBJ170(C)A Features • • • • • Glass passivated junction. 600W Peak Pulse Power capability on 10/1000 µs waveform. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 µA above 10V. 0.185 (4.699) 0.160 (4.064) 0.083 (2.108) 0.075 (1.905 ) 2 1 0.155 (3.937) 0.130 (3.302) 0.220 (5.588) 0.200 (5.080) SMB/DO-214AA COLOR BAND DENOTES CATHODE ON UNIDIRECTIONAL DEVICES ONLY. NO COLOR BAND ON BIDIRECTIONAL DEVICES. 0.096 (2.438) 0.083 (2.108) • 0.050 (1.270) 0.030 (0.762) 0.008 (0.203) 0.004 (0.102) 0.012 (0.305) 0.006 (0.152) DEVICES FOR BIPOLAR APPLICATIONS - Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions. 600 Watt Transient Voltage Suppressors Absolute Maximum Ratings* Symbol PPPM IPPM if(surge) Tstg TJ TA = 25°C unless otherwise noted Parameter Peak Pulse Power Dissipation on 10/1000 µs waveform Peak Pulse Current on 10/1000 µs waveform Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range Operating Junction Temperature (Note 1) Value minimum 600 see table 100 -55 to +150 -55 to +150 Units W A A °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum. 2000 Fairchild Semiconductor International SMBJ5.0(C)A-SMBJ170(C)A, Rev. c SMBJ5.0(C)A - SMBJ170(C)A Transient Voltage Supressors (continued) Electrical Characteristics Uni-directional Bi-directional (C) Device SMBJ5.0(C)A SMBJ6.0(C)A SMBJ6.5(C)A SMBJ7.0(C)A SMBJ7.5(C)A SMBJ8.0(C)A SMBJ8.5(C)A SMBJ9.0(C)A SMBJ10(C)A SMBJ11(C)A SMBJ12(C)A SMBJ13(C)A SMBJ14(C)A SMBJ15(C)A SMBJ16(C)A SMBJ17(C)A SMBJ18(C)A SMBJ20(C)A SMBJ22(C)A SMBJ24(C)A SMBJ26(C)A SMBJ28(C)A SMBJ30(C)A SMBJ33(C)A SMBJ36(C)A SMBJ40(C)A SMBJ43(C)A SMBJ45(C)A SMBJ48(C)A SMBJ51(C)A SMBJ54(C)A SMBJ58(C)A SMBJ60(C)A SMBJ64(C)A SMBJ70(C)A SMBJ75(C)A SMBJ78(C)A SMBJ85(C)A SMBJ90(C)A SMBJ100(C)A SMBJ110(C)A SMBJ120(C)A SMBJ130(C)A SMBJ150(C)A SMBJ160(C)A SMBJ170(C)A Part Marking TA = 25°C unless otherwise noted Reverse Breakdown Voltage Stand-off Voltage VBR (V) VRWM (V) min max 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100.0 111.0 122.0 133.0 144.0 167.0 178.0 189.0 7.0 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.8 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104.0 111.0 123.0 135.0 147.0 159.0 185.0 197.0 209.0 Test Current IT (mA) 10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 Max Clamping Voltage @IPPM VC (V) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0 Max Peak Pulse Surge Current IPPM (A) 65.2 58.3 53.6 50.0 46.5 44.1 41.7 39.0 35.3 33.0 30.2 27.9 25.9 24.6 23.1 21.7 20.5 18.5 16.9 15.4 14.3 13.2 12.4 11.3 10.3 9.3 8.6 8.3 7.8 7.3 6.9 6.4 6.2 5.8 5.3 5.0 4.8 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2 Max Reverse Leakage VRWM IR (uA)* 800 800 500 200 100 50 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 KE(AE) KG(AG) KK(AK) KM(AM) KP(AP) KR(AR) KT(AT) KV(AV) KX(AX) KZ(AZ) LE(BE) LG(BG) LK(BK) LM(BM) LP(LM) LR(BR) LT(BT) LV(BV) LX(BX) LZ(BZ) ME(CE) MG(CG) MK(CK) MM(CM) MP(CP) MR(CR) MT(CT) MV(CV) MX(CX) MZ(CZ) NE(DE) NG(DG) NK(DK) NM(DM) NP(DP) NR(DR) NT(DT) NV(DV) NX(DX) NZ(DZ) PE(EE) PG(EG) PK(EK) PM(EM) PP(EP) PR(ER) * For bidirectional parts with VRWM