SMBJ5V0(C)A - SMBJ170(C)A
Transient Voltage Suppressors SMBJ5V0(C)A - SMBJ170(C)A
Features • • • • •
Glass passivated junction. 600W Peak Pulse Power capability on 10/1000 µs waveform. Excellent clamping capability. Low incremental surge resistance. Fast response time; typically less than 1.0 ps from 0 volts to BV for unidirectional and 5.0 ns for bidirectional. Typical IR less than 1.0 µA above 10V.
SMB/DO-214AA
COLOR BAND DENOTES CATHODE ON UNIDIRECTIONAL DEVICES ONLY. NO COLOR BAND ON BIDIRECTIONAL DEVICES.
•
DEVICES FOR BIPOLAR APPLICATIONS
- Bidirectional types use CA suffix. - Electrical Characteristics apply in both directions.
600 Watt Transient Voltage Suppressors
Absolute Maximum Ratings*
Symbol
PPPM IPPM IFSM Tstg TJ
TA = 25°C unless otherwise noted
Parameter
Peak Pulse Power Dissipation on 10/1000 µs waveform Peak Pulse Current on 10/1000 µs waveform Non-repetitive Peak Forward Surge Current superimposed on rated load (JEDEC method) Storage Temperature Range Operating Junction Temperature
(Note 1)
Value
600 see table 100 -55 to +150 + 150
Units
W A A °C °C
*These ratings are limiting values above which the serviceability of any semiconductor device may be impaired.
Note 1: Measured on 8.3 ms single half-sine wave or equivalent square wave; Duty cycle = 4 pulses per minute maximum.
2003 Fairchild Semiconductor Corporation
SMBJ5V0(C)A-SMBJ170(C)A, Rev. I
SMBJ5V0(C)A - SMBJ170(C)A
Transient Voltage Suppressors
(continued)
Electrical Characteristics
Uni-directional Bi-directional (C) Device Part Marking*
TA = 25°C unless otherwise noted
Reverse Stand-off Voltage V RWM (V) 5.0 6.0 6.5 7.0 7.5 8.0 8.5 9.0 10 11 12 13 14 15 16 17 18 20 22 24 26 28 30 33 36 40 43 45 48 51 54 58 60 64 70 75 78 85 90 100 110 120 130 150 160 170
Breakdown Voltage V BR (V) m in 6.40 6.67 7.22 7.78 8.33 8.89 9.44 10.0 11.1 12.2 13.3 14.4 15.6 16.7 17.8 18.9 20.0 22.2 24.4 26.7 28.9 31.1 33.3 36.7 40.0 44.4 47.8 50.0 53.3 56.7 60.0 64.4 66.7 71.1 77.8 83.3 86.7 94.4 100.0 111.0 122.0 133.0 144.0 167.0 178.0 189.0 m ax 7.0 7.37 7.98 8.60 9.21 9.83 10.4 11.1 12.8 13.5 14.7 15.9 17.2 18.5 19.7 20.9 22.1 24.5 26.9 29.5 31.9 34.4 36.8 40.6 44.2 49.1 52.8 55.3 58.9 62.7 66.3 71.2 73.7 78.6 86.0 92.1 95.8 104.0 111.0 123.0 135.0 147.0 159.0 185.0 197.0 209.0
Test Current I T (mA)
Clamping Voltage @I PPM V C (V) 9.2 10.3 11.2 12.0 12.9 13.6 14.4 15.4 17.0 18.2 19.9 21.5 23.2 24.4 26.0 27.6 29.2 32.4 35.5 38.9 42.1 45.4 48.4 53.3 58.1 64.5 69.4 72.7 77.4 82.4 87.1 93.6 96.8 103.0 113.0 121.0 126.0 137.0 146.0 162.0 177.0 193.0 209.0 243.0 259.0 275.0
Peak Pulse Current I PPM (A) 65.2 58.3 53.6 50.0 46.5 44.1 41.7 39.0 35.3 33.0 30.2 27.9 25.9 24.6 23.1 21.7 20.5 18.5 16.9 15.4 14.3 13.2 12.4 11.3 10.3 9.3 8.6 8.3 7.8 7.3 6.9 6.4 6.2 5.8 5.3 5.0 4.8 4.4 4.1 3.7 3.4 3.1 2.9 2.5 2.3 2.2
Reverse Leakage @ V RWM I R (uA)** 800 800 500 200 100 50 20 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5
S MBJ5V0(C)A S MBJ6V0(C)A S MBJ6V5(C)A S MBJ7V0(C)A S MBJ7V5(C)A S MBJ8V0(C)A S MBJ8V5(C)A S MBJ9V0(C)A S MBJ10(C)A S MBJ11(C)A S MBJ12(C)A S MBJ13(C)A S MBJ14(C)A S MBJ15(C)A S MBJ16(C)A S MBJ17(C)A S MBJ18(C)A S MBJ20(C)A S MBJ22(C)A S MBJ24(C)A S MBJ26(C)A S MBJ28(C)A S MBJ30(C)A S MBJ33(C)A S MBJ36(C)A S MBJ40(C)A S MBJ43(C)A S MBJ45(C)A S MBJ48(C)A S MBJ51(C)A S MBJ54(C)A S MBJ58(C)A S MBJ60(C)A S MBJ64(C)A S MBJ70(C)A S MBJ75(C)A S MBJ78(C)A S MBJ85(C)A S MBJ90(C)A S MBJ100(C)A S MBJ110(C)A S MBJ120(C)A S MBJ130(C)A S MBJ150(C)A S MBJ160(C)A S MBJ170(C)A
KE KG KK KM KP KR KT KV KX KZ LE LG LK LM LP LR LT LV LX LZ ME MG MK MM MP MR MT MV MX MZ NE NG NK NM NP NR NT NV NX NZ PE PG PK PM PP PR
10 10 10 10 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
* Color band denotes cathode on unidirectional devices only. No color band on bidirectional devices. ** For bidirectional parts with VRWM
