SS22-S210

S S22-S210 Discrete POWER & Signal Technologies SS22 - S210 0.185 (4.699) 0.160 (4.064) Features • • • Glass passivated junctions. High current capability, low VF. For use in low voltage, high frequency inverters free wheeling, and polarity protection applications. 0.083 (2.108) 0.075 (1.905 ) 2 1 0.155 (3.937) 0.130 (3.302) 0.220 (5.588) 0.200 (5.080) SMB/DO-214AA COLOR BAND DENOTES CATHODE 0.096 (2.438) 0.083 (2.108) 0.050 (1.270) 0.030 (0.762) 0.008 (0.203) 0.004 (0.102) 0.012 (0.305) 0.006 (0.152) 2.0 Ampere Schottky Barrier Rectifiers Absolute Maximum Ratings* Symbol IO if(surge) PD RθJA Tstg TJ TA = 25°C unless otherwise noted Parameter Average Rectified Current .375 " lead length @ TA = 75°C Peak Forward Surge Current 8.3 ms single half-sine-wave Superimposed on rated load (JEDEC method) Total Device Dissipation Derate above 25°C Thermal Resistance, Junction to Ambient ** Storage Temperature Range Operating Junction Temperature Value 2.0 Units A 50 1.3 13 75 -65 to +150 -65 to +125 A W mW/°C °C/W °C °C *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. **Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics Parameter 22 Peak Repetitive Reverse Voltage Maximum RMS Voltage DC Reverse Voltage (Rated VR) Maximum Reverse Current TA = 25°C (Note 1) @ rated VR TA = 100°C Maximum Forward Voltage @ 2.0 A Note: Pulse Test: Pulse Width ≤ 300 µs, Duty Cycle ≤ 2.0% TA = 25°C unless otherwise noted Device 23 30 21 30 24 40 28 40 25 50 35 50 0.4 10 700 26 60 42 60 28 80 56 80 29 90 64 90 210 100 80 100 20 14 20 Units V V V mA mA mV 500 850 ©1998 Fairchild Semiconductor Corporation SS22-S210, Rev. A S S22-S210 Schottky Barrier Rectifiers (continued) Typical Characteristics Forward Current Derating Curve 2 FORWARD CURRENT (A) F orward Characteristics 50 FORWARD CURRENT (A) 20 10 5 SS22-24 TA = 25º C f = 1 .0 MHz Vsig = 50mVp-p 1.5 1 0.5 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B. MOUNTED ON 8.0x8.0mm COPPER PAD AREAS SS28 - S210 1 SS25-26 0 50 60 70 80 90 100 110 120 130 140 150 LEAD TEMPERATURE ( º C) 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 FORWARD VOLTAGE (V) 1 1.1 Reverse Characteristics 10 REVERSE CURRENT (mA) SS22-24 T A = 100 ºC Junction Capacitance 500 SS22-24 1 CAPACITANCE (pF) 200 100 50 TA = 2 5º C f = 1 .0 MHz Vsig = 50mVp-p SS25-S210 0.1 TA = 7 5º C SS25-S210 TA = 2 5º C 0.01 20 10 0.1 0.001 0 20 40 60 80 100 120 140 NORMALIZED REVERSE VOLTAGE (%) 0.5 1 5 10 20 REVERSE VOLTAGE (V) 50 100 Non-Repetitive Surge Current 60 FORWARD SURGE CURRENT (A) 50 40 30 20 10 0 8.3ms Single Half Sine-Wave JEDEC Method 1 2 5 10 20 50 NUMBER OF CYCLES AT 60Hz 100 SS22-S210, Rev. A TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ CoolFET™ CROSSVOLT™ E2CMOSTM FACT™ FACT Quiet Series™ FAST® FASTr™ GTO™ HiSeC™ DISCLAIMER ISOPLANAR™ MICROWIRE™ POP™ PowerTrench™ QS™ Quiet Series™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 TinyLogic™ FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.