SS9013
SS9013
1W Output Amplifier of Potable Radios in Class B Push-pull Operation.
• • • • High total power dissipation. (PT=625mW) High Collector Current. (IC=500mA) Complementary to SS9012 Excellent hFE linearity.
1
TO-92
1. Emitter 2. Base 3. Collector
NPN Epitaxial Silicon Transistor
Absolute Maximum Ratings Ta=25°C unless otherwise noted
Symbol VCBO VCEO VEBO IC PC TJ TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Collector Power Dissipation Junction Temperature Storage Temperature Ratings 40 20 5 500 625 150 -55 ~ 150 Units V V V mA mW °C °C
Electrical Characteristics Ta=25°C unless otherwise noted
Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE1 hFE2 VCE (sat) VBE (sat) VBE (on) Parameter Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Base-Emitter On Voltage Test Condition IC =100µA, IE =0 IC =1mA, IB =0 IE =100µA, IC =0 VCB =25V, IE =0 VEB =3V, IC =0 VCE =1V, IC =50mA VCE =1V, IC =500mA IC =500mA, IB =50mA IC =500mA, IB =50mA VCE =1V, IC =10mA 0.6 64 40 120 120 0.16 0.91 0.67 Min. 40 20 5 100 100 202 0.6 1.2 0.7 V V V Typ. Max. Units V V V nA nA
hFE Classification
Classification hFE1 D 64 ~ 91 E 78 ~ 112 F 96 ~ 135 G 112 ~ 166 H 144 ~ 202
©2002 Fairchild Semiconductor Corporation
Rev. A3, May 2002
SS9013
Typical Characteristics
20 18
IB = 160µA
1000
IB = 140µA IB = 120µA IB = 100µA IB = 80µA IB = 60µA IB = 40µA IB = 20µA
1
VCE = 1V
IC [mA], COLLECTOR CURRENT
16 14 12 10 8 6 4 2 0 0 10 20 30
hFE, DC CURRENT GAIN
100
10
40
50
1
10
100
1000
10000
VCE [V], COLLECTOR-EMITTER VOLTAGE
IC [mA], COLLECTOR CURRENT
Figure 1. Static Characteristic
Figure 2. DC current Gain
VBE(sat), V CE(sat)[mV], SATURATION VOLTAGE
10000
fT[MHz], CURRENT GAIN BANDWIDTH PRODUCT
IC = 10 IB
1000
VCE = 6V
1000
100
VBE (sat)
100
10
VCE (sat)
10 1 10 100 1000 10000
1 1 10 100 1000 10000
IC [mA], COLLECTOR CURRENT
IC [mA], COLLECTOR CURRENT
Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage
Figure 4. Current Gain Bandwidth Product
©2002 Fairchild Semiconductor Corporation
Rev. A3, May 2002
SS9013
Package Demensions
TO-92
4.58 –0.15
+0.25
0.46
14.47 ±0.40
±0.10
4.58 ±0.20
1.27TYP [1.27 ±0.20] 3.60
±0.20
1.27TYP [1.27 ±0.20]
0.38 –0.05
+0.10
3.86MAX
1.02 ±0.10
0.38 –0.05
+0.10
(R2.29)
(0.25)
Dimensions in Millimeters
©2002 Fairchild Semiconductor Corporation Rev. A3, May 2002
TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™
FAST® FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™
MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™
SLIENT SWITCHER® SMART START™ SPM™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™
UHC™ UltraFET® VCX™
STAR*POWER is used under license
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Preliminary
No Identification Needed
Full Production
Obsolete
Not In Production
©2002 Fairchild Semiconductor Corporation
Rev. H5
很抱歉,暂时无法提供与“SS9013F”相匹配的价格&库存,您可以联系我们找货
免费人工找货