SS9013G

SS9013 SS9013 1W Output Amplifier of Potable Radios in Class B Push-pull Operation. • • • • High total power dissipation. (PT=625mW) High Collector Current. (IC=500mA) Complementary to SS9012 Excellent hFE linearity. 1 TO-92 1. Emitter 2. Base 3. Collector NPN Epitaxial Silicon Transistor Absolute Maximum Ratings Ta=25°C unless otherwise noted Symbol VCBO VCEO VEBO IC PC TJ TSTG Parameter Collector-Base Voltage Collector-Emitter Voltage Emitter-Base Voltage Collector Current Collector Power Dissipation Junction Temperature Storage Temperature Ratings 40 20 5 500 625 150 -55 ~ 150 Units V V V mA mW °C °C Electrical Characteristics Ta=25°C unless otherwise noted Symbol BVCBO BVCEO BVEBO ICBO IEBO hFE1 hFE2 VCE (sat) VBE (sat) VBE (on) Parameter Collector-Base Breakdown Voltage Collector-Emitter Breakdown Voltage Emitter-Base Breakdown Voltage Collector Cut-off Current Emitter Cut-off Current DC Current Gain Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage Base-Emitter On Voltage Test Condition IC =100µA, IE =0 IC =1mA, IB =0 IE =100µA, IC =0 VCB =25V, IE =0 VEB =3V, IC =0 VCE =1V, IC =50mA VCE =1V, IC =500mA IC =500mA, IB =50mA IC =500mA, IB =50mA VCE =1V, IC =10mA 0.6 64 40 120 120 0.16 0.91 0.67 Min. 40 20 5 100 100 202 0.6 1.2 0.7 V V V Typ. Max. Units V V V nA nA hFE Classification Classification hFE1 D 64 ~ 91 E 78 ~ 112 F 96 ~ 135 G 112 ~ 166 H 144 ~ 202 ©2002 Fairchild Semiconductor Corporation Rev. A3, May 2002 SS9013 Typical Characteristics 20 18 IB = 160µA 1000 IB = 140µA IB = 120µA IB = 100µA IB = 80µA IB = 60µA IB = 40µA IB = 20µA 1 VCE = 1V IC [mA], COLLECTOR CURRENT 16 14 12 10 8 6 4 2 0 0 10 20 30 hFE, DC CURRENT GAIN 100 10 40 50 1 10 100 1000 10000 VCE [V], COLLECTOR-EMITTER VOLTAGE IC [mA], COLLECTOR CURRENT Figure 1. Static Characteristic Figure 2. DC current Gain VBE(sat), V CE(sat)[mV], SATURATION VOLTAGE 10000 fT[MHz], CURRENT GAIN BANDWIDTH PRODUCT IC = 10 IB 1000 VCE = 6V 1000 100 VBE (sat) 100 10 VCE (sat) 10 1 10 100 1000 10000 1 1 10 100 1000 10000 IC [mA], COLLECTOR CURRENT IC [mA], COLLECTOR CURRENT Figure 3. Base-Emitter Saturation Voltage Collector-Emitter Saturation Voltage Figure 4. Current Gain Bandwidth Product ©2002 Fairchild Semiconductor Corporation Rev. A3, May 2002 SS9013 Package Demensions TO-92 4.58 –0.15 +0.25 0.46 14.47 ±0.40 ±0.10 4.58 ±0.20 1.27TYP [1.27 ±0.20] 3.60 ±0.20 1.27TYP [1.27 ±0.20] 0.38 –0.05 +0.10 3.86MAX 1.02 ±0.10 0.38 –0.05 +0.10 (R2.29) (0.25) Dimensions in Millimeters ©2002 Fairchild Semiconductor Corporation Rev. A3, May 2002 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ Bottomless™ CoolFET™ CROSSVOLT™ DenseTrench™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT™ FACT Quiet Series™ FAST® FASTr™ FRFET™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ ISOPLANAR™ LittleFET™ MicroFET™ MicroPak™ MICROWIRE™ OPTOLOGIC™ OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerTrench® QFET™ QS™ QT Optoelectronics™ Quiet Series™ SLIENT SWITCHER® SMART START™ SPM™ STAR*POWER™ Stealth™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TinyLogic™ TruTranslation™ UHC™ UltraFET® VCX™ STAR*POWER is used under license DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Preliminary No Identification Needed Full Production Obsolete Not In Production ©2002 Fairchild Semiconductor Corporation Rev. H5