USB1T11AM

USB1T11A Universal Serial Bus Transceiver November 1999 Revised March 2005 USB1T11A Universal Serial Bus Transceiver General Description The USB1T11A is a one chip generic USB transceiver. It is designed to allow 5.0V or 3.3V programmable and standard logic to interface with the physical layer of the Universal Serial Bus. It is capable of transmitting and receiving serial data at both full speed (12Mbit/s) and low speed (1.5Mbit/s) data rates. The input and output signals of the USB1T11A conform with the “Serial Interface Engine”. Implementation of the Serial Interface Engine along with the USB1T11A allows the designer to make USB compatible devices with off-theshelf logic and easily modify and update the application. Features s Complies with Universal Serial Bus specification 1.1 s Utilizes digital inputs and outputs to transmit and receive USB cable data s Supports 12Mbit/s “Full Speed” and 1.5Mbit/s “Low Speed” serial data transmission s Compatible with the VHDL “Serial Interface Engine” from USB Implementers' Forum s Supports single-ended data interface s Single 3.3V supply s ESD Performance: Human Body Model ! 9.5 kV on D, D pins only ! 4 kV on all other pins s 16-lead Pb-Free MLP package saves space Ordering Code: Order Number USB1T11AM (Note 1) USB1T11AM_NL (Note 2) USB1T11ABQX USB1T11AMTC (Note 1) USB1T11AMTC_NL (Note 2) USB1T11AMTCX_NL (Note 2) Package Number M14A M14A MLP16C MTC14 MTC14 MTC14 Package Description 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Pb-Free 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Pb-Free 16-Terminal Molded Leadless Package (MLP), JEDEC MO-220, 3mm square 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pb-Free 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Pb-Free package per JEDEC J-STD-020B. Note 1: D evice also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Note 2: “_NL” indicates Pb-Free package (per JEDEC J-STD-020B). Please use order number as indicated. The USB-IF Logos are trademarks of Universal Serial Bus Implementers Forum, Inc. © 2005 Fairchild Semiconductor Corporation DS500234 www.fairchildsemi.com USB1T11A Connection Diagrams Pin Assignments for SOIC and TSSOP Logic Diagram Pin Assignments for MLP Pin Descriptions Pin Name RCV OE MODE VPO, VMO/FSEO I/O O I I I Description Receive data. CMOS level output for USB differential input Output Enable. Active LOW, enables the transceiver to transmit data on the bus. When not active the transceiver is in receive mode. Mode. When left unconnected, a weak pull-up transistor pulls it to VCC and in this GND, the VMO/FSEO pin takes the function of FSEO (Force SEO). Inputs to differential driver. (Outputs from SIE). MODE 0 VPO 0 0 1 1 1 0 0 1 1 VP, VM O VMO/FSEO 0 1 0 1 0 1 0 1 RESULT Logic “0” SE0 Logic “1” SEO SE0 Logic “0” Logic “1” Illegal code Gated version of D and D. Outputs are logic “0” and logic “1”. Used to detect single ended zero (SE0), error conditions, and interconnect speed. (Input to SIE). VP 0 0 1 1 VM 0 1 0 1 RESULT SE0 Low Speed Full Speed Error D, D SUSPND SPEED VCC GND AI/O I I Data, Data. Differential data bus conforming to the Universal Serial Bus standard. Suspend. Enables a low power state while the USB bus is inactive. While the suspend pin is active it will drive the RCV pin to a logic “0” state. Both D and D are 3-STATE. Edge rate control. Logic “1” operates at edge rates for “full speed”. Logic “0” operates edge rates for “low speed”. 3.0V to 3.6V power supply Ground reference www.fairchildsemi.com 2 USB1T11A Functional Truth Table Input Mode 0 0 0 0 1 1 1 1 X X X Z U Don’t Care 3-STATE Undefined State I/O OE 0 0 0 0 0 0 0 0 1 1 SUSPND 0 0 0 0 0 0 0 0 0 1 D 0 0 1 0 0 0 1 1 Z Z D 1 0 0 0 0 1 0 1 Z Z RCV 0 U 1 U U 0 1 U U U Outputs VP 0 0 1 0 0 0 1 U U U VM 1 0 0 0 0 1 0 U U U Result Logic 0 SEO Logic 1 SEO SEO Logic 0 Logic 1 Illegal Code D/D Hi-Z D/D Hi-Z VPO 0 0 1 1 0 0 1 1 X X VMO/FSEO 0 1 0 1 0 1 0 1 X X 3 www.fairchildsemi.com USB1T11A Absolute Maximum Ratings(Note 3) DC Supply Voltage (VCC) DC Input Diode Current (IIK) VI  0 Input Voltage (VI) (Note 4) Input Voltage (VI/O) Output Diode Current (IOK) VO ! VCC or VO  0 Output Voltage (VO) (Note 4) Output Source or Sink Current (IO) VP.VM, RCV pins VO 0 to VCC 0.5V to 7.0V 50 mA 0.5V to 5.5V 0.5V to VCC  0.5V r50 mA 0.5V to VCC  0.5V Recommended Operating Conditions Supply Voltage VCC Input Voltage (VI) Input Range for AI/O (VAI/O) Output Voltage (VO) Operating Ambient Temperature in free air (Tamb) 3.0V to 3.6V 0V to 5.5V 0V to VCC 0V to VCC 40qC to 85qC r15 mA Note 3: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristic tables are not guaranteed at the absolute maximum rating. The “Recommended Operating Conditions” table will define the conditions for actual device operation. Note 4: The input and output voltage ratings may be exceeded if the input and output clamp current ratings are observed. Output Source or Sink Current (IO) D/D pins VO 0 to VCC VCC or GND Current (ICC, IGND) Storage Temperature (TSTO) r50 mA r100 mA 60qC to  150qC DC Electrical Characteristics (Digital Pins) Over recommended range of supply voltage and operating free air temperature (unless otherwise noted). VCC Symbol Parameter INPUT LEVELS: VIL VIH VOL VOH LOW Level Input Voltage HIGH Level Input Voltage OUTPUT LEVELS: LOW Level Output Voltage HIGH Level Output Voltage LEAKAGE CURRENT: IL ICCFS ICCLS ICCQ ICCS Input Leakage Current Supply Current (Full Speed) Supply Current (Low Speed) Quiescent Current Supply Current in Suspend VCC VCC VCC VCC VIN VCC 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 VCC or GND 3.0 to 3.6; Mode VCC IOL IOL IOH IOH 4 mA 20 PA 4 mA 20 PA 2.4 VCC – 0.1 0.4 0.1 V V 2.0 0.8 V V Test Conditions Temp Min 3.0V to 3.6V Limits 40qC to 85qC Typ Max Unit r5 5 5 5 10 PA mA mA mA PA www.fairchildsemi.com 4 USB1T11A DC Electrical Characteristics Symbol Parameter INPUT LEVELS: VDI VCM VSE VOL VOH VCR IOZ CIN(Note 6) Differential Input Sensitivity Differential Common Mode Range Single Ended Receiver Threshold OUTPUT LEVELS: Static Output LOW Voltage Static Output HIGH Voltage Differential Crossover LEAKAGE CURRENT: (D/D Pins) 3.0V to 3.6V Limits Test Conditions Temp Min Over recommended range of supply voltage and operating free air temperature (unless otherwise noted). VCC 40qC to 85qC Typ Max Units |(D) – (D)| Includes VDI Range 0.2 0.8 0.8 2.5 2.0 0.3 2.8 1.3 3.6 2.0 V V V V V V RL of 1.5 k: to 3.6V RL of 15 k: to GND High Z State Data Line Leakage Current 0V  VIN  3.3V CAPACITANCE: Transceiver Capacitance Capacitance Match OUTPUT RESISTANCE: Pin to GND r5 10 10 PA pF % ZDRV (Note 5) Driver Output Resistance Resistance Match Steady State Drive 4 20 10 : % Note 5: Excludes external resistor. In order to comply with USB Specification 1.1, external series resistors of 24: r 1% each on D and D are recommended. This specification is guaranteed by design and statistical process distribution. Note 6: This specification is guaranteed by design and statistical process distribution. AC Electrical Characteristics (D/D Pins, Full Speed) Over recommended range of supply voltage and operating free air temperature (unless otherwise noted). VCC CL 50 pF; RL 1.5 k: on D to VCC Parameter 3.0V to 3.6V Limits Symbol Test Condition Temp Min 40qC to 85qC Typ Max Units DRIVER CHARACTERISTICS: 10% and 90% tR tF tRFM VCRS tPLH tPLH tPHZ tPLZ tPZH tPZL tPLH tPHL tPLH tPHL Rise Time Fall Time Rise/Fall Time Matching Output Signal Crossover Voltage DRIVER TIMINGS: Driver Propagation Delay (VPO, VMO/FSEO to D/D) Driver Disable Delay (OE to D/D) Driver Enable Delay (OE to D/D) RECEIVER TIMINGS: Receiver Propagation Delay (D, D to RCV) Single-ended Receiver Delay (D, D to VP, VM) Figure 3 Figure 3 Figure 3 Figure 3 16 19 8 8 ns ns ns ns Figure 2 Figure 2 Figure 4 Figure 4 Figure 4 Figure 4 18 18 13 13 17 17 ns ns ns ns ns ns Figure 1 Figure 1 (tr/tf) 4 4 90 1.3 20 20 110 2.0 % V ns 5 www.fairchildsemi.com USB1T11A AC Electrical Characteristics (D/D Pins, Low Speed) Over recommended range of supply voltage and operating free air temperature (unless otherwise noted). VCC CL 200 pF to 600 pF; RL 1.5k: on D to VCC 3.0V to 3.6V Limits Symbol Parameter DRIVER CHARACTERISTICS: 10% and 90% tLR tLF tRFM VCRS tPLH tPHL tPHZ tPLZ tPZH tPZL tPLH tPHL tPLH tPHL Rise Time Fall Time Rise/Fall Time Matching Output Signal Crossover Voltage DRIVER TIMINGS: Driver Propagation Delay (VPO, VMO/FSEO to D/D) Driver Disable Delay (OE to D/D) Driver Enable Delay (OE to D/D) RECEIVER TIMINGS: Receiver Propagation Delay (D, D to RCV) Single-ended Receiver Delay (D, D to VP, VM) Figure 3 Figure 3 Figure 3 Figure 3 18 18 28 28 ns ns ns ns Figure 2 Figure 2 Figure 4 Figure 4 Figure 4 Figure 4 300 300 13 13 205 205 ns ns ns ns ns ns Figure 1 Figure 1 (tr/tf) 75 75 80 1.3 300 300 120 2.0 % V ns Test Conditions Min Tamb 40qC to 85qC Typ Max Unit www.fairchildsemi.com 6 USB1T11A AC Waveforms VOL and VOH are the typical output voltage drops that occur with the output load. (VCC never goes below 3.0V) FIGURE 1. Rise and Fall Times FIGURE 2. VPI, VMO/FSEO to D/D FIGURE 3. D/D to RCV, VP/VM FIGURE 4. OE to D/D Test Circuits and Waveforms Load for VM/VP and RCV Load for Enable and Disable Times Note: V V 0 for tPZH, tPHZ VCC for t PZL, tPLZ Load for D/D Test CL CL CL 50 pF, Full Speed 200 pF, Low Speed (Min Timing) 600 pF, Low Speed (Max Timing) S1 D/LS Close D/LS Open D/FS Open D/FS Close 1.5 k: on D (Low Speed) or D (Full Speed) only 7 www.fairchildsemi.com USB1T11A Tape and Reel Specification Tape Format for MLP Package Designator BQX Carrier Trailer (Hub End) TAPE DIMENSIONS inches (millimeters) Tape Section Leader (Start End) Number Cavities 125 (typ) 2500 75 (typ) Cavity Status Empty Filled Empty Cover Tape Status Sealed Sealed Sealed REEL DIMENSIONS inches (millimeters) Tape Size 12 mm A (mm) 330 N (Typical) (mm) 178 W1 (mm) 12.4 W2 (Max) (mm) 18.4 www.fairchildsemi.com 8 USB1T11A Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A 9 www.fairchildsemi.com USB1T11A Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 16-Terminal Molded Leadless Package (MLP), JEDEC MO-220, 3mm square Package Number MLP16C www.fairchildsemi.com 10 USB1T11A Universal Serial Bus Transceiver Physical Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Package Number MTC14 Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 11 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com www.fairchildsemi.com