SCD075A32

SELECTABLE WIDEBAND DELAY LINE MODULE SCD075A32 The SCD075A32 delay line is a passive, low cost selectable delay module designed to work in the unbalanced signal path prior to - or after - converting to or from balanced signal driving. With long runs of balanced, twisted pair cable to remote VGA monitors, delay skew can become significant between the R, G and B signals resulting in an irritatingly poor display. With one module 1 connected in each of the R, G and B signal paths the delay at the monitor end can be equalized to within a few nanoseconds resulting in an obvious improvement to the final picture quality. The module consists of 5 individually selectable delay sections of 16, 8, 4, 2 and 1 ns which, with a suitable switching arrangement, can be cascaded in any combination to accurately set a required delay. ? 32ns delay correction to over 100MHz bandwidth ? For use with Cat 5 , 6 or 7 cable ? Can eliminate delay skew ? Designed for KVM systems distributing RGB video ? Adjustable to 1ns resolution Performance Specification Impedance IN/OUT 3dB bandwidth Delay sections available (ns) Insertion Loss @100kHz (all sections cascaded) 75 ohms 100MHz 16, 8, 4, 2, 1 0.5dB 7ns 2ns DR00340B Delay ripple to 100MHz (all sections cascaded) Delay tolerance between modules (all sections cascaded) Package 1 providing that the maximum delay skew is less than 32ns © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice Fara342d Page 1 of 2 Oct-05(B) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. Fara342d Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 sales@faradaytech.co.uk http://www.faradaytech.co.uk Oct-05(B)