SDI-003C

SDI-003 SERIAL D1 TO CVBS/YC MODULE + + + Small compact design for pcb mounting Fully filtered and buffered outputs Three CVBS outputs or CVBS + Y/C output + + Auto 625/525 operation Reclocked outputs available This interface card accepts D1 serial digits and provides three analogue Composite video outputs with colour bursts and mixed sync’s to allow picture display on a Composite video monitor. An interface card with Y/C output (S-Video) and 1 CVBS output only is available. Input Requirements Input Input Impedance Line standard Equalisation 1 x 270 Mb/s serial NRZI (EBU TECH 3267, SMPTE RP-259M) 75 ohm terminating 625/50 or 525/60 Auto detection Automatic up to 40 dB at 200 MHz (Typically 300m of Belden 8281 at 270Mhz) 3 CVBS or 1 CVBS and Y/C (As requested) 1 V pk-pk including syncs ±2% 75 ohms 8 bit data / 9 bit DAC ±0.2 dB to 5.5 MHz > 60 dB rms to 5.5 MHz 2 reclocked serial o/ps 75 ohms Options B and D only + 5V ±0.25V (500 mA max) - 5V ±0.50V (50 mA max) 00C to 400C Yes DR00168C Analogue Output Characteristics Output format Output levels Impedance Resolution Frequency response Signal-to-Noise ratio Digital Outputs Output format Impedance Available Power Operating Temp. Aqueous Washable Package Other parameters ORDERING CODES SDI-003A SDI-003B SDI-003C SDI-003D Reclocked o/p’s x √ x √ 3 x CVBS o/p’s √ √ x x CVBS, Y and C o/p’s x x √ √ © Faraday Technology. As part of continual product improvement the specifications, details and dimensions shown in this publication are subject to change without notice FARA013d.DOC Page 1 of 2 Sep-01(D) PACKAGE DETAIL Faraday Technology Ltd. Croft Road Industrial Estate, Newcastle, Staffordshire ST5 0QZ. England. FARA013d.DOC Tel: Fax: Email: Web site: Page 2 of 2 + 44 (0)1782 661501 + 44 (0)1782 630101 sales@faradaytech.co.uk http://www.faradaytech.co.uk Sep-01(D)