TRX10GDL0610

TRANCEIVERS Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL0610 APPLICATIONS 10G Ethernet 10GBASE-LRM MergeOptics SFP+ transceiver TRX10GDP0610 is an optical transceiver module for transmission over legacy multimode fibers. It complies with SFP+ MSA specifications (SFF-8431 and SFF-8432) and 10GBASE-LRM per IEEE 802.3aq. It is RoHS 6/6 complaint per Directive 2002/95/EC and laser class 1 safety compliant per IEC/CDRH. The sub watt power consumption and the excellent EMI performance allow system design with high port density. SUPPORTED STANDARDS Application 10G Ethernet IEEE 802.3aq 10GBASE-LRM Standard 10.3125GBd Data Rate FEATURES & BENEFITS Compliant to SFP+ Electrical MSA SFF-8431 Compliant to SFP+ Mechanical MSA SFF-8432 Ethernet 10GBase-LRM compliant Data rate transparent from 9.95Gbps to 11.3Gbps Support I2C for serial transceiver ID and digital diagnostic monitoring per SFF-8472. Transmission distance up to 220m (MO1 fiber) Low power consumption: 0.8W (Typ.) 0°C to +70°C case operating temperature range 1310nm DFB laser Laser Class 1 IEC / CDRH compliant RoHS 6/6 compliant www.fciconnect.com Compliant with product safety standards TRX10GDL0610 Datasheet, Rev C1-01, July 2010 1 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 TABLE OF CONTENTS Table of Contents Functional Description Electrical Characteristics Absolute Maximum Ratings Recommended Operating Conditions Low Speed Characteristics SFI Module Transmitter Input Characteristics SFI Module Receiver Output Characteristics 2 3 4 4 4 4 5 5 6 6 6 6 7 7 7 8 9 9 9 10 Optical Characteristics General Parameters Optical Transmitter Optical Receiver Application Information Connector Pinout Electrical Pin Definition Application Schematics Interfacing the Transceiver Digital Diagnostic Monitoring Digital Diagnostic Monitoring Accuracy Module Outline Ordering Information Regulatory Compliance Module Safety ESD & Electromagnetic compatibility 10 11 11 11 11 12 Eye Safety Sales Contacts 2 www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 FUNCTIONAL DESCRIPTION The Transceiver convert information from electrical to optical format, and back again, at different data rates depending upon the chosen standard. The transmit path consists of an AC coupled 100 ohm differentially terminated driver coupled to a highly reliable 1310nm DFB. The laser output may be disabled by pulling the TX_DISABLE line high. The laser is also disabled if this line is left floating, as it is pulled high inside the transceiver. A fault condition is raised upon detection of an abnormal laser state. The RATE-SELECT is not implemented in the LRM module. The receiver path consists of a ROSA (receiver optical sub-assembly) for optical electrical conversion, followed by a linear amplifier to boost the electrical signal. A LOSS_OF_SIGNAL (LOS) status line is provided to facilitate easy link detection. The receiver RATE_SELECT pin is not used by the transceiver. Complete digital optical monitoring is implemented in compliance to SFF-8472 and made accessible via the 2-wire interface providing real time information about all important module parameters and status information. www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 3 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 ELECTRICAL CHARACTERISTICS Absolute Maximum Ratings Rating Storage Ambient Temperature Range Powered Case Temperature Range Operating Relative Humidity Supply Voltage Range @ 3.3V Open Drain VCC Level Static Discharge Voltage on High Speed Pins Static Discharge Voltage excluding High Speed Pins Static Discharge Voltage on SFP+ Module Conditions Symbol ϑstg ϑc RH VCC3 VOD Min -40 0 0 -0.5 Max +85 +75 95 3.6 4.0 1 2 15 8 Units °C °C % V V kV kV kV Non condensing HBM human body model per JEDEC JESD22-A114-B HBM human body model EN61000-4-2 Criterion B: Air Discharge Direct Contact discharge Any stress beyond the maximum ratings may result in permanent damage to the device. Specifications are guaranteed only under recommended operating conditions. Recommended Operating Conditions Parameter Operating Case Temperature Range Power Supply Voltage @ 3.3V DC Common Mode Voltage Conditions altitude of < 3km Symbol ϑCase VCC3 VCM Min 0 3.135 0 3.300 Typ Max +70 3.465 3.6 Units °C V V Low Speed Characteristics Parameter Supply Current Transmitter Supply Current Receiver Total Supply Current Power Consumption VOL TX_Fault, RX_LOS, SCL, SDA Host Vcc Range 2V – 3.46V VOH VIL VIH VIL VIH SCL, SDA Host Vcc Range 3.14V – 3.46V VOL VOH 0 Host_ Vcc – 0.5 -0.3 2.0 -0.3 VccT* 0.7 0.0 Host_ Vcc – 0.5 Conditions @ VCCTX @ VCCRX Symbol IVCCTX IVCCRX IVCCTX + IVCCRX Min Typ 150 85 240 0.73 290 1.0 0.4 Host_ Vcc + 0.3 0.8 VccT + 0.3 VccT* 0.3 VccT + 0.5 0.4 Host_ Vcc + 0.3 Max Units mA mA mA W TX_Dis Low Voltage TTL V 4 www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 FUNCTIONAL DESCRIPTION SFI Module Transmitter Input Characteristics Parameter Supported Data Rate Reference Differential Input Impedance Input AC Common Mode Input Voltage Differential Input Voltage Swing Differential Input S-parameter Differential to Common Mode 2) Conversion Total Jitter Data Dependant Jitter Uncorrelated Jitter Eye Mask 1) 2) Conditions Symbol VID Zd Min Typ 10.3125 100 Max Units Gbd Ω mV (RMS) mV dB dB dB UI(p-p) UI(p-p) RMS UI UI 0 VID 0.01 – 3.9GHz 3.9 – 11.1GHz 0.01 – 11.1Ghz SDD11 SCD11 TJ DDJ UJ See SFP+ MSA X1 X2 180 See 1) 25 700 -10 See 1) -10 0.28 0.1 0.023 0.14 0.35 Differential Return Loss given by equation SDD11(dB) = -8+13.33 Log10(f/5.5), with f in GHz Common mode reference impedance is 25 . Differential to common mode conversion relates to generation of EMI SFI Module Receiver Output Characteristics Parameter Supported Data Rate Reference Differential Output Impedance Termination Mismatch Output AC Common Mode Voltage Differential Output Amplitude Differential Output S-parameter Common Mode Output Return Loss ) Receiver Waveform Distortion Penalty 1) 2) 2 Conditions Symbol Zd d Min Typ 10.3125 100 Max Units Gbd Ω 5 15 RLoad = 100Ohm, Differential 0.01 – 3.9GHz 3.9 – 11.1GHz 0.01 – 6.5GHz 6.5 – 11.1GHz VOSPP SDD22 SCC22 dWDP 180 600 -10 See 1) -7 -3 1.5 % mV (RMS) mV dB dB dB dB dB Return Loss given by equation Sxx22(dB) = -8+13.33 Log10(f/5.5), with f in GHz Common mode reference impedance is 25 . Common mode return loss helps absorb reflection and noise improving EMI www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 5 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 OPTICAL CHARACTERISTICS General Parameters Parameter Conditions 62.5 µm MO1 MMF Operating Range 50 µm MO2 MMF 50 µm MO3 MMF Min Modal Bandwidth (MHz*km) 500 Symbol Min Max Units lOP 220 m Optical Transmitter Parameter Nominal Wavelength Side Mode Suppression Ratio Average Launch Power Optical Modulation Amplitude Extinction Ratio Relative Intensity Noise 10.3125GBd Ethernet Conditions Symbol λTRP SMSR Pavg POMA ER RIN Min 1290 30 -6.5 -4.5 3.5 5.0 -128 Typ 1310 Max 1330 0.5 1.5 Units nm dB dBm dBm dB dB/Hz Optical Receiver Parameter Maximum Input Power Center Wavelength Overload Stressed Receiver Sensitivity Stressed Receiver Sensitivity Symmetrical Test Loss of Signal Loss of Signal Hysteresis OMA, PRBS 2 -1, BER < 1*10 @10.3125GBd 31 -12 Conditions Symbol PMAX λC PSat PIN PIN Pav_as Pav_deas Min 1290 1.5 -6.5 -6 -25 0.5 Typ 1310 Max 0.5 1355 Units dBm nm dBm dBm dBm -16 -14.5 1.5 -13 dBm dBm Note: The specified characteristics are met within the recommended range of operating. Unless otherwise noted typical data are quoted at nominal voltages and +25°C ambient temperature. 6 www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 APPLICATION INFORMATION Connector Pinout Electrical Pin Definition PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 CML-I CML-I Logic LVTTL-O LVTTL-I LVTTL-I LVTTL-I/O LVTTL-I LVTTL-O LVTTL-I Symbol VeeT TX_Fault TX_Dis SCL Module Transmitter Ground Module Transmitter Fault Transmitter Disable; Turns off transmitter laser output 2-Wire Serial Interface Clock Name / Description Note 1 2 2 SDA 2-Wire Serial Interface Data Line MOD_DEF0 Module Definition, Grounded in the module RS0 RX_LOS RS1 VeeR VeeR RDRD+ VeeR VccR VccT VeeT TDTD+ VeeT No function implemented Receiver Loss of Signal Indication Active LOW No function implemented Module Receiver Ground Module Receiver Ground Receiver Inverted Data Output Receiver Data Output Module Receiver Ground Module Receiver 3.3 V Supply Module Receiver 3.3 V Supply Module Transmitter Ground Transmitter Inverted Data Input Receiver Non-Inverted Data Output Module Transmitter Ground 1 1 CML-O CML-O 1 1 1 1. Module ground pins GND are isolated from the module case. 2. Shall be pulled up with 4.7K-10Kohms to a voltage between 3.15V and 3.45V on the host board. www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 7 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 APPLICATION SCHEMATICS Recommended electrical connections to transceiver are shown below. 8 www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 INTERFACING THE TRANSCEIVER Communication is d one b y a serial 2 -wire interface similar to t he I 2C b us p rotocol. A s described in t he document SFF-8472 there are two distinct address spaces: Base Address A0(hex) Byte Address Content Serial Transceiver 0- 95 ID as defined in SFP MSA MergeOptics 96 -1 27 Specific 128- 255R eserved Base Address A2(hex) Byte Address 0- 55 56 -9 5 96 –1 19 120– 127N Content Alarm & Warnings thresholds & limits External calibration constants (not used) Values from real time diagnostic monitoring ot used Customer specific, writable area ot used Memory map details are described in a separate app note. 128– 247 248- 255N Digital Diagnostic Monitoring Transceivers offer the ability to monitor important module parameter during operation. The five parameters listed below are continuously monitored for getting information about the current module status. All data is calibrated internally; there is no need for external post processing. Temperature Internally measured temperature data is represented as two’s complement of a signed 16-bit value in increments of 1/256 °C over a range of -40 to +100°C. Accuracy is better than +/-3%. Supply Voltage (VCC) Internally measured supply voltage. Represented as a 16-bit unsigned integer with the voltage defined as the full 16 bit value (0 – 65535) with LSB equal to 100 Volt, which yields to a total range of 0 to +6.55 Volts. Accuracy is better than +/-3%. Laser Bias Current VCSEL bias current. Represented as a 16 bit unsigned integer with the current defined as the full 16-bit value (0 – 65535) with LSB equal to 2 A, valid range is 0 to 20 mA. Accuracy is better than +/-10%. Optical Transmitter Power TX output power measurement is based on internal monitor diode feedback. Represented as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 – 65535) with LSB equal to 0.1 W . Accuracy is better than +/-3dB over a range of Pavmin to Pavmax. Receiver Optical Power RX input power measurement is based on photodiode diode current. Represented as a 16-bit unsigned integer with the power defined as the full 16 bit value (0 – 65535) with LSB equal to 0.1 W . Accuracy is better than +/-3dB over a range of -12dBm to -1dBm. Digital Diagnostic Monitoring Accuracy Parameter Internally measured transceiver temperature Internally measured supply voltage Laser bias current TX output power RX input power Note: min and max specs are met over specified full temperature and voltage range. and nominal supply voltage. Conditions supply voltage 3.30V ± 5% transceiver temperature 0 to 70°C Symbol ∆T ∆V ∆I ∆PTx ∆PRx Min -3 -0.1 -10 -2 -2 Typ ±1 Max 3 0.1 Units °C V % dBm dBm ±1 ±1 10 2 2 Typ shows typical values at room temperature www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 9 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 MODULE OUTLINE All dimensions shown are in millimeters. ORDERING INFORMATION 10 www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 Product Specification 10GBd SFP+ 1310nm LRM Linear Transceiver TRX10GDL06100 REGULATORY COMPLIANCE EYE SAFETY www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 11 Contact info EUROPE FCI Deutschland GmbH Wernerwerkdamm 16 13629 Berlin, Germany Ph: +49 30 750 795 00 Fax: +49 30 386 37 54 AMERICAS MergeOptics 1551 McCarthy Blvd, Suite 116 Milpitas, CA 95035 USA Phone: 408-493-9970 More information about FCI’s complete range of High Speed Input/Output products can be found on www.fciconnect.com/hsio For more information about e-catalog or FCI sales offices, headquarters, agents and local distributors, visit www.fciconnect.com 12 www.fciconnect.com TRX10GDL0610 Datasheet, Rev C1-01, July 2010 ELX10GDL0610710EA4