GFZ3A

Preliminary Data Sheet 3.0 Amp Glass Passivated Sintered Rectifiers 6.60/7.11 Description Mechanical Dimensions Package ‘‘SMC’’ 5.59/6.10 7.75/8.12 .15/.30 .171 1.91/2.41 .051/.152 GFZ3A . . . 3M Series Features n LOWEST COST FOR GLASS SINTERED CONSTRUCTION n LOWEST VF FOR GLASS SINTERED CONSTRUCTION n TYPICAL IR < 100 nAmps n 3.0 AMP OPERATION @ TA = 100°C, WITH NO THERMAL RUNAWAY n SINTERED GLASS CAVITY-FREE JUNCTION Electrical Characteristics @ 25 o C. Maximum Ratings Peak Repetitive Reverse Voltage...VRRM RMS Reverse Voltage...VR(rms) DC Blocking Voltage...VDC Average Forward Rectified Current...IF(av) @ TA = 100°C (Note 2) Non-Repetitive Peak Forward Surge Current...IFSM 8.3mS, ½ Sine Wave Superimposed on Rated Load Forward Voltage @ 3.0A...VF Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 100°C DC Reverse Current...IR(max) @ Rated DC Blocking Voltage T A = 25 ° C TA = 150 ° C 3A 50 35 50 3B 100 70 100 GFZ3A . . . 3M Series 3D 200 140 200 3G 400 280 400 3J 600 420 600 3K 800 560 800 3M 1000 700 1000 Units Volts Volts Volts Amps Amps Volts µAmps ............................................. 3.0 ............................................... ............................................. 1 2 5 ............................................... < ...... 1.1 ...... > < ............................. 1.0 ........................... > ............................................. 1 0 0 ............................................... ............................................. 5.0 ............................................... ............................................. 2 0 0 ............................................... ............................................. 4 0 ............................................... ............................................. 1 5 ............................................... ............................................. 2.0 ............................................... µAmps pF °C / W µS °C Typical Junction Capacitance...CJ (Note 1) Typical Thermal Resistance...RθJA (Note 2) Typical Reverse Recovery Time...tRR (Note 3) Operating & Storage Temperature Range...TJ, TSTRG ......................................... -65 to 175 .......................................... Preliminary Data Sheet 3.0 Amp Glass Passivated Sintered Rectifiers Die Dimension (mils) Forward Current Derating Curve T D Glass d G TL = L ead Temperature (° C) D 126 d G 86 2+0.5 T 11 A 15+1 Non-Repetitive Peak Forward Surge Current TJ = TJ max. 8.3 mS Single Half Sine Wave (Jedec Method) Typical Junction Capacitance TJ = 25°C f = 1.0 MHZ VSIG = 50mVp-p Amps Number of Cycles @ 60 HZ Typical Instantaneous Forward Characteristics pF Reverse Voltage (Volts) Typical Reverse Characteristics TJ = 125°C µ Amps TJ = 75°C Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Amps TJ = 25°C Volts Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. 8.0mm2 (.013mm thick) land areas. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. GFZ3A . . . 3M Series A Amps