GPZ15B

Preliminary Data Sheet Description 1.5 Amp Glass Passivated Sintered Rectifiers Mechanical Dimensions JEDEC D0-15 .104 .140 .230 .300 1.00 Min. GPZ15A . . . 15M Series .031 typ. Features n LOWEST COST FOR GLASS SINTERED CONSTRUCTION n LOWEST VF FOR GLASS SINTERED CONSTRUCTION n TYPICAL IR < 100 nAmps n 1.5 AMP OPERATION @ TA = 55°C, WITH NO THERMAL RUNAWAY n SINTERED GLASS CAVITY-FREE JUNCTION Electrical Characteristics @ 25 o C. Maximum Ratings Peak Repetitive Reverse Voltage...VRRM RMS Reverse Voltage...VR(rms) DC Blocking Voltage...VDC Average Forward Rectified Current...I F(av) Current 3/8" Lead Length @ TA = 55°C Non-Repetitive Peak Forward Surge Current...IFSM 8.3mS, ½ Sine Wave Superimposed on Rated Load Forward Voltage @ 1.5A...VF Full Load Reverse Current...IR(av) Full Cycle Average @ TA = 55°C DC Reverse Current...IR @ Rated DC Blocking Voltage TA = 25 ° C TA = 150 ° C 15A 50 35 50 GPZ15A . . . 15M Series 15B 100 70 100 15D 200 140 200 15G 400 280 400 15J 600 420 600 15K 800 560 800 15M 1000 700 1000 Units Volts Volts Volts Amps Amps Volts µAmps ............................................. 1.5 ............................................... ............................................. 5 0 ............................................... ............................................. 1.0 ............................................... ............................................. 1 0 0 ............................................... ............................................. 5.0 ............................................... ............................................. 2 0 0 ............................................... ............................................. 1 5 ............................................... ............................................. 2 5 ............................................... ............................................. 2.0 ............................................... ......................................... -65 to 175 .......................................... µ Amps µ Amps pF °C / W µS °C Typical Junction Capacitance...CJ (Note 1) Typical Thermal Resistance...RθJA (Note 2) Typical Reverse Recovery Time...tRR (Note 3) Operating & Storage Temperature Range...TJ, TSTRG Preliminary Data Sheet 1.5 Amp Glass Passivated Sintered Rectifiers Forward Current Derating Curve 60 Hz RESISTIVE OR INDUCTIVE LOAD 0.375″ (9.5mm) LEAD LENGTH TA = Ambient Temperature (° C) Non-Repetitive Peak Forward Surge Current TJ = TJ max. 8.3 mS Single Half Sine Wave (Jedec Method) Typical Junction Capacitance TJ = 25°C f = 1.0 MHZ VSIG = 50mVp-p Amps Number of Cycles @ 60 HZ Typical Instantaneous Forward Characteristics pF Reverse Voltage (Volts) Typical Reverse Characteristics TJ = 125°C TJ =150°C µ Amps Amps T = 25 C TJJ= 25°°C Pulse Width 300µS Pulse Width ==300µS 1% Duty Cycle 1% Duty Cycle TJ = 25°C TJ = 75°C TJ = 25°C TJ = 25°C Ratings at 25 Deg. C ambient temperature unless otherwise specified. Single Phase Half Wave, 60 HZ Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Volts Percent of Rated Peak Voltage NOTES: 1. Measured @ 1 MHZ and applied reverse voltage of 4.0V. 2. Thermal Resistance from Junction to Ambient at 3/8" Lead Length, P.C. Board Mounted. 3. Reverse Recovery Condition IF = 0.5A, IR = 1.0A, IRR = 0.25A. GPZ15A . . . 15M Series Amps