SF64

Data Sheet 6.0 Amp SUPER FAST PLASTIC RECTIFIERS Mechanical Dimensions D0-27A .285 .375 1.00 Typ. SF61 . . . 66 Series Description .180 .210 .031 Typ. Features n LOW COST n LOW LEAKAGE n HIGH SURGE CAPABILITY n MEETS UL SPECIFICATION 94V-O SF61 . . . 66 Series Maximum Ratings Peak Repetitive Reverse Voltage...VRRM RMS Reverse Voltage...VR(rms) DC Blocking Voltage...VDC Average Forward Rectified Current...IF(av) TA = 55°C Non-Repetitive Peak Forward Surge Current...IFSM @ Rated Current & Temp Operating & Storage Temperature Range...TJ, TSTRG Electrical Characteristics Maximum Forward Voltage @ 6.0A...VF Maximum DC Reverse Current...IR @ Rated DC Blocking Voltage TA = 25°C TA =100 ° C < ......................... 0.95 ........................ > < ........ 1.4 ....... > SF61 50 35 50 SF62 100 70 100 SF63 150 105 150 SF64 200 140 200 SF66 400 280 400 Units Volts Volts Volts Amps ............................................. 6.0 ............................................... ............................................. 150 ............................................... Amps °C ........................................ -65 to 150 ......................................... Volts ............................................. 5.0 ............................................... µ Amps ............................................. 200 ............................................... µ Amps ............................................. 170 ............................................... < ......................... 35 ........................ > < ........ 75 ....... > pF ns Typical Junction Capacitance...CJ (Note 1) Maximum Reverse Recovery Time...tRR (Note 2) Page 4-30 Data Sheet 6.0 Amp SUPER FAST PLASTIC RECTIFIERS Non-Repetitive Peak Forward Surge Current 175 125 75 25 1 10 Number of Cycles @ 60 Hz Typical Junction Capacitance Junction Capacitance (pF) 100 Forward Current Derating Curve Peak Forward Surge Current (A) Average Forward Current (A) 6 4 8.3 ms Single Half Sine Wave 2 0 25 50 75 100 125 150 175 Ambient Temperature (° C) Typical Reverse Characteristics 1000 Reverse Current (µA) 100 10 1 .1 TJ = 150°C TJ= 100°C TJ= 25°C TJ= 25°C 40 80 120 Percent of Rated Peak Voltage Typical Instantaneous Forward Characteristics Pulse Width = 300 µs % Duty Cycle Reverse Voltage (V) Reverse Recovery Characteristics Non-Inductive (+) (-) 50Ω 25 VDC D.U.T 1Ω NonInductive 10Ω (-) Pulse Generator Note 2 Forward Current (A) T J = 2 5 °C +.5A 0A -.25A -1.0A tRR Ratings at 25 Deg. C ambient temperature unless otherwise specified. 1 cm Single Phase Half Wave, 60 Hz Resistive or Inductive Load. For Capacitive Load, Derate Current by 20%. Oscilliscope (+) Note 1 Notes: 1 . Rise Time = 7 ns Max. Impedance = 1 megohm, 22 pF 2 . Rise Time = 10 ns Max. Source Impedance = 50 Ohms Time Base Set @ 50/100ns/cm Forward Voltage (V) NOTES: 1. Measured @ 1 MHz and applied reverse voltage of 4.0V. 2. Conditions: IF = 0.5A, I R = 1.0A, I RR = 0.25A. Page 4-31 SF61 . . . 66 Series