DK-57TS-LPC3250

5.7” QVGA Touch Screen LCD Kit . DK-57TS-LPC3250 For the NXP LPC3250 Highlights  SOMDIMM – CPU System On Module, DIMM form factor (Dual Inline Memory Module) o LPC3250 266MHz ARM926EJ-S based microcontroller o 256KB of Internal SRAM, 512MB* NAND FLASH, 64MB* of External SDRAM o 10/100 Ethernet PHY o Micro SD Memory Socket o Mini-JTAG Debug Connector  CARRIER – Generic Carrier Board for CPU and LCD Modules o 200-pin SOMDIMM Socket, supporting various processor Modules o 10/100 Ethernet Port, USB Host and Device ports o One RS-232 port (Male DB9), External I2C interface o 3-axis Digital Accelerometer & Temperature Sensor o Real-time Clock with SuperCap backup o TFT interface for Graphics LCD displays up to 1024x768 resolution, 18-bit color o Flexible Power Supply input can be wall supply or 5V USB  LCDCARRIER o 5.7” QVGA Display with Touch Screen Interface o Optional 3.5” QVGA board, up to 10.4” XGA Board  Software Included o Linux Operating System o VMWare Development Virtual Machine Image o Linux Driver support: LCD frame buffer, Touch screen, NAND-Flash, SDRAM, MMC, USB, I2C, SPI, DMA, Ethernet, RS232, and RTC.  Supplied with easy-to-use application documents for all hardware and software Platform is based on a modular design for maximum flexibility Additional CPU SOMDIMM and LCD Carrier boards under development   The DK-57TS-LPC3250 is optimized to save development time in typical embedded control applications. The modular format uses a base Carrier Board, a core CPU SOMDIMM and an LCD Carrier Board. The base Carrier Board includes expansion connectors for added flexibility and a range of configurations. FDI offers low cost customization services for customer specific hardware, software or packaging applications at volumes of 500 units or more. Features SOMDIMM-LPC3250 Description The SOMDIMM-LPC3250 includes an NXP LPC3250 ARM9EJ-S based microcontroller running the open source Linux software platform. The LPC3250 has 256KB of internal SRAM memory, a 10/100 Ethernet Media Access Controller (MAC), a USB full speed device/host/OTG controller, seven UARTs, and a collection of serial communications interfaces. The SOMDIMM-LPC3250 also includes 64MB* of external SDRAM and 512MB* of external NAND FLASH. Actual PCB dimensions are 2.66” x 1.89” JTAG MINI JTAG I2C_2 1.8V & 1.2V PS UART5 SPEAKER SERVICE_N TFT 16-BIT TOUCH SCR UART2,3,4,5, & 7 HICORE SPI_1 USB ATX GPIO ISP1301 USB OTG PHY uSD Socket LPC3250 ARM926EJ-S based Microprocessor RMII UART1 Linux Drivers support:  LCD frame buffer  Touch Screen  NAND-Flash, SDRAM, MMC  USB, SPI, DMA, Ethernet, RS232, I2C, RTC. USB H OR USB D 1KX8 SECURE EEPROM NAND SDRAM KSZ8041 ETH 10/100 PHY ETHERNET I2C_1  Linux Operating System Bootloader (both primary boot loader and u-boot bootloader) VMWare Development Virtual Machine Image I2C_1   4G NAND FLASH TSOP48 MMC 32MX16 DDR SDRAM VFBGA60 (64Mx16 OPT) Software Included: Linux Board Support Package 0.9V1.35V VCORE PS 5.0V 3.3V DEBUG SERIAL CONN SOMDIMM-LPC3250 Block Diagram Ordering Information Part Number: DK-57TS-LPC3250 NXP Part Number: OM11078 Kit Contents: Order Online at: www.digikey.com Warranty: 30-day money back guarantee Phone 256-883-1240 Fax 256-883-1241 www.teamfdi.com * Rev 2 SOMDIMM-LPC3250 and later - SOMDIMM-LPC3250 Board - CARRIER Board - LCDCARRIER Board & 5.7” QVGA LCD Touch Screen - 5VDC, 2.3A North American Power Supply - USB and Ethernet Cables - Segger JTAG Debugger with cables Download Users Manual, documents, schematics, and software examples at: www.teamfdi.com/SOMDIMM-LPC3250 Rev 1 12/2/2009 All brand names and product names are trademarks or registered trademarks of their respective holder