UEZGUI-1788-70WVT

7.0" Resistive Touch Screen LCD GUI µEZ 7.0 4WR ® GUI 0.55” The uEZ GUI ® provides everything you need right out of the box to have a touch screen GUI instantly in your project. Each uEZ GUI unit is available in two convenient forms. To get your project started quickly we offer a full development kit complete with JTAG debugger, power supply, cables, a microSD card and full documentation. The Dev Kit Part Number is uEZGUI-1788-70WVT. Once your design is complete, we also offer a cost-effective production module for prototypes or even for high volume production. The module includes the touchscreen display, all of the necessary hardware, and is supported by the uEZ® / FreeRTOS™ open source software. The uEZ GUI module is available off-the -shelf from any of our franchised distributors under Part Number uEZGUI-1788-70WVT-BA. Features t 7.0” TFT WVGA 800x480 LCD Panel with Integrated Touch Screen t NXP LPC1788 120MHz CPU with 512KB Internal Flash t 8MB of SDRAM, 16MB on Rev 5.1 and later (optional to 32MB) t 8MB of NOR FLASH (optional to 16MB) t 4GB microSD Memory Card t USB Device Mini-AB PC communications t USB Device Mini-B connector for 5.0VDC power t NV Data Storage via 4kB Internal EEPROM t Low power, Real-Time Clock with Supercap Backup t Speaker, 3-axis Accelerometer, Temperature Sensor t Mini-JTAG Debug Connector t

0QUJPOBM
O
8J'J
NPEVMF
t

&YUFSOBM
&YQBOTJPO
WJB
UXP
*0
DPOOFDUPST

QJOT
-UART, I2C, SPI, USB Host/Device, RMII Ethernet www.teamfdi.com (256) 883-1240 @TeamFDI #TeamFDI Module