USB-ICP-80C51ISP

USB-ICP USB-ICP–80C51ISP USB In-Circuit Programmer USB-ICP supports In-System Programming (ISP) on Philips 80C51 Flash based microcontroller families. In-System Programming uses a two-wire serial interface to program and erase ISP enabled microcontroller devices without removing them from the system. The ISP function uses only six pins: VCC, GND, RXD, TXD, PSEN- and RESET. A small connector is all that is needed to interface your ISP application to the USB-ICP programmer. Highlights • USB port powered so no external Power Supply required • Supports USB 2.0 • USB-ICP Kit Includes: ♦ USB-ICP dongle • Plugs directly into any standard USB Port – great for laptops ♦ 18” cable allowing direct connection to the user's application • Supports Philips’ P89C51 Flash family of microcontrollers ♦ ISP design guide for the user’s target board • Works with Philips’ free Flash Magic software that can be downloaded from the web Technical Details Target Schematic VCC 1 2 3 4 5 6 RESET PSENRXD TXD USB-ICP uses a standard RJ-45 for connection to the target cable. Indicator LEDs Green – “Link” Indicates the USB-ICP has been configured by the host PC Yellow –“ACT” indicates USB Activity (Rx/Tx) The ISP function uses only six pins: VCC, GND, RXD, TXD, PSEN- and RESET. The simple circuit above is all that must be added to the user’s application to use ISP with USB-ICP. Target Connector The target connector utilized is a standard 0.100” pitch 6-pin header available from numerous suppliers. Example Molex Part Numbers Part Number Description 22-03-2061 6pin vertical through hole 68301-1017 22-05-2061 6pin vertical surface mount 6pin right angle through hole Ordering Information Part Number: USB-ICP-80C51ISP www.digikey.com Digi-Key P/N: 622-1001-ND Warranty: 30-day money back guarantee Availability: Stock (800) 278-0293 Phone (256) 883-1241 FAX USB ICP Family Part Number Supports USB-ICP-LPC9xx Philips LPC9xx USB-ICP-80C51ISP Philips P89C51 Flash USB-ICP-LPC2K Philips ARM7 LPC2xxx www.teamfdi.com All brand names and product names are trademarks or registered trademarks of their respective holders. Rev 2.0 8/9/2006