ER41-3C92

FERROXCUBE DATA SHEET ER41/7.6/32 Planar ER cores and accessories New data 2008 Sep 01 Ferroxcube Planar ER cores and accessories CORE SETS Effective core parameters SYMBOL Σ(I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of core half VALUE 0.253 12900 57.0 225 201 ≈ 37 UNIT mm−1 mm3 mm mm2 mm2 g R0.25 max (4x) ER41/7.6/32 3.6 7.6 ± 0.1 ± 0.1 3.8 min 16 ± 0.3 A R1.0 (8x) 2 + 0.3 −0 5˚ 32 ± 0.6 R0.8 (2x) A 34.04 ± 0.7 40.64 ± 0.8 3.2 min (2x) Section A-A MFP183 Dimensions in mm. Fig.1 ER41/7.6/32 core half. Core halves for general purpose transformers and power applications Clamping force for AL measurements, 100 ± 25 N. GRADE 3C92 3C93 3C95 3C96 3F3 AL (nH) 6500 ± 25 % 7500 ± 25 % 11120 ± 25 % 8100 ± 25 % 8100 ± 25 % µe ≈ 1310 ≈ 1510 ≈ 2240 ≈ 1630 ≈ 1630 AIR GAP (µm) ≈0 ≈0 ≈0 ≈0 ≈0 TYPE NUMBER ER41/7.6/32-3C92 ER41/7.6/32-3C93 ER41/7.6/32-3C95 ER41/7.6/32-3C96 ER41/7.6/32-3F3 Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 °C ≥ 370 ≥ 320 ≥ 320 ≥ 340 ≥ 300 f = 100 kHz; ˆ B = 100 mT; T = 100 °C ≤ 1.3 ≤ 1.3 − ≤ 0.92 ≤ 1.7 (1) CORE LOSS (W) at f = 100 kHz; ˆ B = 200 mT; T = 25 °C − − ≤ 8.94 − − f = 100 kHz; ˆ B = 200 mT; T = 100 °C ≤ 7.8 ≤ 7.8 (1) f = 400 kHz; ˆ B = 50 mT; T = 100 °C − − − − ≤ 2.5 f = 500 kHz; ˆ B = 50 mT; T = 100 °C − − − ≤ 5.58 − 3C92 3C93 3C95 3C96 3F3 1. ≤ 8.51 ≤ 5.88 − Measured at 140 °C. 2008 Sep 01 2 Ferroxcube Planar ER cores and accessories MOUNTING INFORMATION 41.65 min 33.15 max 16.45 min ER41/7.6/32 32.8 min R0.8 max (8×) MFP184 Fig.2 Recommended PCB cut-out for ER41/7.6/32 cores. Winding data for ER41/7.6/32 planar core WINDING AREA (mm2) 64.9 AVERAGE TRACK LENGTH (mm) 78.6 FOOTPRINT AREA (mm2) 1316 2008 Sep 01 3 Ferroxcube Planar ER cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS ER41/7.6/32 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 4