P11

FERROXCUBE DATA SHEET P11/7 P cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube P cores and accessories CORE SETS Effective core parameters SYMBOL Σ(I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of set VALUE 0.956 251 15.5 16.2 13.2 ≈ 1.8 UNIT mm−1 mm3 mm mm2 mm2 g O 2.9 O 2.1 0.1 9 0.4 0 2.2 0.3 4.7 0 0.2 6.8 0.25 P11/7 11.1 0.2 2 0.1 0.3 0.1 4.4 0 6.5 0.2 0.45 max M1.4 Dimensions in mm. MGC150 Fig.1 P11/7 core set. Core sets for filter applications Clamping force for AL measurements, 35 ±10 N. GRADE 3D3 AL (nH) 16 ±3% 25 ±3% 40 ±3% 63 ±3% 100 ±3% 800 ±25% 3H3 160 ±3% 250 ±3% 1650 ±25% µe ≈ 12 ≈ 19 ≈ 31 ≈ 48 ≈ 76 ≈ 610 ≈ 122 ≈ 190 ≈ 1 260 TOTAL AIR GAP (µm) ≈ 2210 ≈ 1280 ≈ 710 ≈ 400 ≈ 220 ≈0 ≈ 140 ≈ 80 ≈0 TYPE NUMBER (WITH NUT) P11/7-3D3-E16/N P11/7-3D3-E25/N P11/7-3D3-E40/N P11/7-3D3-E63/N P11/7-3D3-A100/N − P11/7-3H3-A160/N P11/7-3H3-A250/N − TYPE NUMBER (WITHOUT NUT) P11/7-3D3-E16 P11/7-3D3-E25 P11/7-3D3-E40 P11/7-3D3-E63 P11/7-3D3-A100 P11/7-3D3 P11/7-3H3-A160 P11/7-3H3-A250 P11/7-3H3 2008 Sep 01 935 Ferroxcube P cores and accessories Core sets for general purpose transformers and power applications Clamping force for AL measurements, 35 ±10 N. GRADE 3C81 AL (nH) 100 ±3% 160 ±3% 250 ±3% 2050 ±25% 3C91 3F3 2050 ±25% 100 ±3% 160 ±3% 250 ±5% 1650 ±25% Core sets of high permeability grades Clamping force for AL measurements, 35 ±10 N. GRADE 3E27 AL (nH) 3400 ±25% µe ≈ 2600 AIR GAP (µm) ≈0 µe ≈ 76 ≈ 122 ≈ 190 ≈ 1560 ≈ 1 560 ≈ 76 ≈ 122 ≈ 190 ≈ 1 260 AIR GAP (µm) ≈ 240 ≈ 140 ≈ 85 ≈0 ≈0 ≈ 240 ≈ 140 ≈ 80 ≈0 P11/7 TYPE NUMBER P11/7-3C81-A100 P11/7-3C81-A160 P11/7-3C81-A250 P11/7-3C81 P11/7-3C91 P11/7-3F3-A100 P11/7-3F3-A160 P11/7-3F3-A250 P11/7-3F3 TYPE NUMBER P11/7-3E27 Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 °C ≥320 ≥315 ≥315 f = 25 kHz; ˆ B = 200 mT; T = 100 °C ≤ 0.05 − − CORE LOSS (W) at f = 100 kHz; ˆ B = 100 mT; T = 100 °C − ≤ 0.015(1) ≤ 0.03 f = 100 kHz; ˆ B = 200 mT; T = 100 °C − ≤ 0.12 (1) − f = 400 kHz; ˆ B = 50 mT; T = 100 °C − − ≤ 0.05 3C81 3C91 3F3 Note 1. Measured at 60 °C. 2008 Sep 01 936 Ferroxcube P cores and accessories INDUCTANCE ADJUSTERS General data handbook, halfpage P11/7 PARAMETER Material of head and thread Maximum operating temperature SPECIFICATION polypropylene (PP), glass fibre reinforced 125 °C 6.2 O 2.13 0.07 0 2.55 M 1.4 0.5 1.5 min MGC151 Dimensions in mm. Fig.2 P11/7 inductance adjuster. Inductance adjuster selection chart GRADE 3H3 AL (nH) 100 − 160 ADJ-P9/P11-YELLOW 250 ADJ-P9/P11-BROWN 3D3 16 − 25 − 40 − 63 − 100 − Note 1. Maximum adjustment range. TYPES FOR LOW ADJUSTMENT (applies to all types) ∆L/L(1) − 8 9 − − − − − TYPES FOR MEDIUM ∆L/L(1) ADJUSTMENT ADJ-P9/P11-YELLOW ADJ-P9/P11-BROWN ADJ-P9/P11-GREY ADJ-P9/P11-YELLOW − − ADJ-P9/P11-YELLOW ADJ-P9/P11-YELLOW 13 15 14 19 − − 18 11 TYPES FOR HIGH ADJUSTMENT ADJ-P9/P11-BROWN ADJ-P9/P11-GREY − − ADJ-P9/P11-YELLOW ADJ-P9/P11-YELLOW − − ∆L/L(1) 24 22 − − 30 24 − − 2008 Sep 01 937 Ferroxcube P cores and accessories COIL FORMERS General data CP-P11/7-1S coil former PARAMETER Coil former material Maximum operating temperature SPECIFICATION polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E45329 (R) 155 °C, “IEC 60085”, class F P11/7 dbook, full pagewidth 4.2 −0 0.1 0.3 1.8 5.7 −0 0.1 8.9 −0 0.1 4.8 +0.1 0 CBW599 0.4 Dimensions in mm. Fig.3 Coil former: CP-P11/7-1S. Winding data and area product for CP-P11/7-1S coil former NUMBER OF SECTIONS 1 WINDING AREA (mm2) 4.8 MINIMUM WINDING WIDTH (mm) 3.1 AVERAGE LENGTH OF TURN (mm) 22.6 AREA PRODUCT Ae x Aw (mm4) 77.8 TYPE NUMBER CP-P11/7-1S 2008 Sep 01 938 Ferroxcube P cores and accessories General data for CP-P11/7-A coil former PARAMETER Coil former material Maximum operating temperature SPECIFICATION acetal (POM), glass reinforced, flame retardant in accordance with “UL 94-HB” ; UL file number E66288(R) 105 °C P11/7 handbook, full pagewidth 4.8 min 4.2 max 1.6 min 8.9 5.65 max MGB528 Dimensions in mm. Fig.4 Coil former: CP-P11/7-A. Winding data and area product for CP-P11/7-A coil former NUMBER OF SECTIONS 1 2 3 MINIMUM WINDING AREA (mm2) 4.77 2 × 2.00 3 × 1.16 NOMINAL WINDING WIDTH (mm) 3.42 2 × 1.52 3 × 0.91 AVERAGE LENGTH OF TURN (mm) 22.7 22.7 22.7 AREA PRODUCT Ae x Aw (mm4) 77.3 2 x 32.4 3 x 18.8 TYPE NUMBER CP-P11/7-1S-A CP-P11/7-2S-A CP-P11/7-3S-A 2008 Sep 01 939 Ferroxcube P cores and accessories MOUNTING PARTS General data ITEM Tag plate REMARKS material: phenolformaldehyde (PF), glass reinforced flame retardant: in accordance with “UL 94V-0” ; file number E41429 maximum operating temperature: 180 °C, “IEC 60085”, class H pins : copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60068-2-20” , Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20” , Part 2, Test Ta, method 1: 235 °C, 2 s Container Spring Clamp copper-zinc alloy (CuZn), tin (Sn) plated earth pins: presoldered CrNi-steel spring force: ≈35 N when mounted spring steel, tin-plated 7 7 6 FIGURE 5 P11/7 TYPE NUMBER TGP-P11/7-C CON-P11/7 SPR-P11/7 CLM/TP-P11/7 12.4 max 10.16 6.9 2.5 4 2.54 10.16 2.4 O 2.4 O 0.8 1.2 3.1 Dimensions in mm. 0.8 1.35 1 0.15 0 MGC153 Fig.5 P11/7 tag plate. 2008 Sep 01 940 Ferroxcube P cores and accessories P11/7 5.5 andbook, full pagewidth 3.4 2.2 3 2 mark 12.45 max. 7.5 max. 10 min. 12.45 max. CBW600 Dimensions in mm. Fig.6 Container: CON-P11/7. handbook, halfpage 1 0.2 0 10.8 max MGC155 Dimensions in mm. Fig.7 Spring: SPR-P11/7. 2008 Sep 01 941 Ferroxcube P cores and accessories P11/7 handbook, halfpage 7 ± 0.25 4 ± 0.25 9.2 ± 0.25 12.2 ± 0.25 7.5 ± 0.25 5 ± 0.5 0.25 12.5 ± 0.25 1.5 ± 0.25 MGB607 Dimensions in mm. Fig.7 Clamp: CLM/TP-P11/7. 2008 Sep 01 942 Ferroxcube P cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS P11/7 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 943