P36-3C81-E315

FERROXCUBE DATA SHEET P36/22 P cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube P cores and accessories CORE SETS Effective core parameters SYMBOL Σ(I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of set VALUE 0.264 10700 53.2 202 172 ≈ 54 UNIT mm−1 mm3 mm mm2 mm2 g +0.2 0 16.2 0 4.9 −0.6 ±0.6 29.9 26.2 ±0.6 P36/22 +1 0 36.2 0 −1.2 ∅5.4 +0.2 0.5 0 +0.4 21.7 14.6 0 ±0.3 CBW429 Dimensions in mm. Fig.1 P36/22 core set. Core sets for general purpose transformers and power applications Clamping force for AL measurements, 350 ±50 N. GRADE 3C81 AL (nH) 315 ±3% 400 ±3% 630 ±3% 1000 ±3% 1600 ±5% 10800 ±25% 3C91 3F3 10800 ±25% 250 ±3% 315 ±3% 400 ±3% 630 ±3% 1000 ±3% 1600 ±5% 7350 ±25% µe ≈ 66 ≈ 84 ≈ 132 ≈ 210 ≈ 335 ≈ 2 260 ≈ 2 260 ≈ 52 ≈ 66 ≈ 84 ≈ 132 ≈ 210 ≈ 335 ≈ 1 540 TOTAL AIR GAP (µm) ≈ 970 ≈ 730 ≈ 430 ≈ 250 ≈ 150 ≈0 ≈0 ≈ 1340 ≈ 970 ≈ 730 ≈ 430 ≈ 250 ≈ 150 ≈0 TYPE NUMBER P36/22-3C81-E315 P36/22-3C81-E400 P36/22-3C81-A630 P36/22-3C81-A1000 P36/22-3C81-A1600 P36/22-3C81 P36/22-3C91 P36/22-3F3-E250 P36/22-3F3-E315 P36/22-3F3-E400 P36/22-3F3-A630 P36/22-3F3-A1000 P36/22-3F3-A1600 P36/22-3F3 2008 Sep 01 1017 Ferroxcube P cores and accessories Core sets of high permeability grades Clamping force for AL measurements, 350 ± 50 N. GRADE 3E27 AL (nH) 17500 ±25% µe ≈ 3670 AIR GAP (µm) ≈0 P36/22 TYPE NUMBER P36/22-3E27 Properties of core sets under power conditions B (mT) at GRADE H = 250 A/m; f = 25 kHz; T = 100 °C ≥320 ≥315 ≥315 f = 25 kHz; ˆ B = 200 mT; T = 100 °C ≤ 2.5 − − ≤ CORE LOSS (W) at f = 100 kHz; ˆ B = 100 mT; T = 100 °C − 0.6(1) ≤ ≤ 1.2 f = 100 kHz; ˆ B = 200 mT; T = 100 °C − 4.5 (1) − f = 400 kHz; ˆ B = 50 mT; T = 100 °C − − ≤ 2.0 3C81 3C91 3F3 Note 1. Measured at 60 °C. 2008 Sep 01 1018 Ferroxcube P cores and accessories COIL FORMERS General data for coil former CP-P36/22 PARAMETER Coil former material Maximum operating temperature SPECIFICATION P36/22 polybutyleneterephtalate (PBT), glass reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E45329 (R) 155 °C, “IEC 60085”, class F handbook, full pagewidth 0 14.4 0.2 0.7 0.7 3.4 0 17.9 0.2 0 29.6 0.2 16.5 0.2 0 0.8 0.8 MGC141 Dimensions in mm. Fig.2 Coil former CP-P36/22. Winding data and area product for coil former CP-P36/22 NUMBER OF SECTIONS 1 2 3 WINDING AREA (mm2) 72.4 2 × 33.9 3 × 21.0 MINIMUM WINDING WIDTH (mm) 12.5 2 × 5.8 3 × 3.6 AVERAGE LENGTH OF TURN (mm) 74.3 74.3 74.3 AREA PRODUCT Ae x Aw (mm4) 14600 2 x 6850 3 x 4240 TYPE NUMBER CP-P36/22-1S CP-P36/22-2S CP-P36/22-3S 2008 Sep 01 1019 Ferroxcube P cores and accessories MOUNTING PARTS General data and ordering information ITEM Tag plate REMARKS material: phenolformaldehyde (PF), glass reinforced flame retardant: in accordance with “UL 94V-0” ; UL file number E41429 maximum operating temperature: 180 °C, “IEC 60085” , class H pins: copper-tin alloy (CuSn), tin (Sn) plated resistance to soldering heat in accordance with “IEC 60 068-2-20” , Part 2, Test Tb, method 1B: 350 °C, 3.5 s solderability in accordance with “IEC 60068-2-20” , Part 2, Test Ta, method 1: 235 °C, 2 s Container Spring copper-zinc alloy (CuZn), tin (Sn) plated earth pins: presoldered CrNi-steel spring force: ≈350 N when mounted 5 4 FIGURE 3 P36/22 TYPE NUMBER TGP-P36/22-C CON-P36/22 SPR-P36/22 handbook, full pagewidth 25 15.24 10.16 2.2 2.1 2.54 20.32 15.24 5.08 5.0 ∅8.4 ∅0.8 mark 37.9 max. 6 1.3 +0.15 0 CBW605 Dimensions in mm. Fig.3 Tag plate: TGP-P36/22-C. 2008 Sep 01 1020 Ferroxcube P cores and accessories P36/22 handbook, full pagewidth 10 8.2 1 0.6 mark 5 9 Dimensions in mm. 33.75 min. 24.5 max. 38.2 max. CBW430 Fig.4 P36/22 container. handbook, halfpage 0.3 2.3 0 34.7 max MGC144 Dimensions in mm. Fig.5 P36/22 spring. 2008 Sep 01 1021 Ferroxcube P cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS P36/22 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 1022