RM6S-3D3

FERROXCUBE DATA SHEET RM6S RM, RM/I, RM/ILP cores and accessories Supersedes data of September 2004 2008 Sep 01 Ferroxcube RM, RM/I, RM/ILP cores and accessories CORE SETS handbook, halfpage RM6S Effective core parameters 14.7 SYMBOL Σ(I/A) Ve Ie Ae Amin m PARAMETER core factor (C1) effective volume effective length effective area minimum area mass of set VALUE 0.863 840 27.3 31.0 23.8 ≈ 5.1 UNIT mm−1 mm3 mm mm2 mm2 g ∅6.4 0 −0.2 M1.7 >8.4 17.9 0 −0.7 8.2 0 −0.4 2.8 0 −0.6 ∅3 +0.1 0 10.35 ±0.2 2.3 8 +0.4 12.4 ±0.1 0 ∅12.4 +0.5 0 Dimensions in mm. CBW296 Fig.1 RM6S core set. Core sets for filter applications Clamping force for AL measurements, 40 ±20 N. GRADE 3D3 AL (nH) 63 ±3% 100 ±3% 160 ±3% 950 ±25% 3H3 160 ±3% 250 ±3% 315 ±3% 400 ±3% 2100 ±25% µe ≈ 44 ≈ 70 ≈ 112 ≈ 670 ≈ 112 ≈ 175 ≈ 221 ≈ 280 ≈ 1 470 TOTAL AIR GAP (µm) ≈ 850 ≈ 460 ≈ 250 ≈0 ≈ 280 ≈ 160 ≈ 120 ≈ 90 ≈0 TYPE NUMBER (WITH NUT) RM6S-3D3-E63/N RM6S-3D3-E100/N RM6S-3D3-A160/N − RM6S-3H3-A160/N RM6S-3H3-A250/N RM6S-3H3-A315/N RM6S-3H3-A400/N − TYPE NUMBER (WITHOUT NUT) RM6S-3D3-E63 RM6S-3D3-E100 RM6S-3D3-A160 RM6S-3D3 RM6S-3H3-A160 RM6S-3H3-A250 RM6S-3H3-A315 RM6S-3H3-A400 RM6S-3H3 2008 Sep 01 1208 Ferroxcube RM, RM/I, RM/ILP cores and accessories INDUCTANCE ADJUSTERS General data PARAMETER Material of head and thread Maximum operating temperature SPECIFICATION polypropylene (PP), glass fibre reinforced 125 °C 9.5 handbook, halfpage RM6S 0.07 O 3.13 0 3.4 M 1.7 0.7 2.4 min MGC079 Dimensions in mm. Fig.2 RM6S inductance adjuster. Inductance adjuster selection chart GRADE 3H3 AL (nH) 40 63 100 160 200 250 315 400 630 1000 1250 3D3 40 63 100 160 Note 1. Maximum adjustment range. − − ADJ-RM6-GREEN ADJ-RM6-GREEN ADJ-RM6-RED ADJ-RM6-WHITE ADJ-RM6-WHITE ADJ-RM6-VIOLET ADJ-RM6-BLACK ADJ-RM6-BLACK − − − ADJ-RM6-GREEN ADJ-RM6-RED TYPES FOR LOW ADJUSTMENT (applies to all types) ∆L/L(1) TYPES FOR MEDIUM ∆L/L(1) % ADJUSTMENT % − − 10 6 9 12 9 8 9 5 − − − 9 9 − ADJ-RM6-GREEN ADJ-RM6-RED ADJ-RM6-RED ADJ-RM6-WHITE ADJ-RM6-VIOLET ADJ-RM6-BROWN ADJ-RM6-BLACK ADJ-RM6-GREY ADJ-RM6-GREY ADJ-RM6-GREY − ADJ-RM6-GREEN ADJ-RM6-RED ADJ-RM6-WHITE − 14 16 11 15 14 15 16 15 9 5 − 14 15 16 TYPES FOR HIGH ADJUSTMENT ADJ-RM6-GREEN ADJ-RM6-RED − ADJ-RM6-WHITE ADJ-RM6-VIOLET ADJ-RM6-BROWN ADJ-RM6-BLACK ADJ-RM6-GREY − − − ADJ-RM6-GREEN ADJ-RM6-RED ADJ-RM6-WHITE − ∆L/L(1) % 20 22 − 19 19 20 23 26 − − − 19 22 27 − 2008 Sep 01 1209 Ferroxcube RM, RM/I, RM/ILP cores and accessories COIL FORMERS General data PARAMETER Coil former material Pin material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION RM6S phenolformaldehyde (PF), glass-reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E167521(M) copper-tin alloy (CuSn), tin (Sn) plated 180 °C, “IEC 60085” , class H “IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s “IEC 60068-2-20”, Part 2, Test Ta, method 1 handbook, full pagewidth 12.7 7.62 1.6 0.4 2 3 7.8 0 −0.15 (6.4 min. ) 0.8 0 −0.1 0.75 ∅0.6 2.54 6.5 +0.15 0 1 8.6 5.7 max. 4 1.4 min. ∅12.3 −0 ∅7.45 −0 0.2 0.1 0.4 5.2 1.0 +0.15 0 CBW612 Dimensions in mm. Fig.3 RM6S coil former; 4-pins. Winding data and area product for 4-pins RM6S coil former NUMBER OF SECTIONS 1 2 NUMBER OF PINS 4 4 PIN POSITIONS USED all all WINDING AREA (mm2) 15 2 × 7.0 WINDING WIDTH (mm) 6.4 2 × 3.0 AVERAGE LENGTH OF TURN (mm) 30 30 AREA PRODUCT Ae x Aw (mm4) 465 2 x 217 TYPE NUMBER CSV-RM6S/R-1S-4P CSV-RM6S/R-2S-4P 2008 Sep 01 1210 Ferroxcube RM, RM/I, RM/ILP cores and accessories General data PARAMETER Coil former material Solder pad material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION RM6S unsaturated polyester (UP), glass-reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E61040 (M) copper-tin alloy CuSn), tin (Sn) plated 180 °C, “IEC 60085”, class H “IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s “IEC 60068-2-20”, Part 2, Test Ta, method 1 7.85 12.7 7.62 3 handbook, full pagewidth 0.8 0 −0.1 0.87 6.26 min. 0.52 4 0.45 ∅ 0.5 5 6.5 +0.15 2 8.5 1 6 0.7 min. ∅12.3 −0.2 ∅ 7.45 ±0.2 1 +0.15 5 CBW516 2.54 Dimensions in mm. Fig.4 Coil former for RM6S; 6-pins. Winding data and area product for RM6S coil former NUMBER OF SECTIONS 1 1 1 2 Note 1. Also available with post-inserted pins. NUMBER OF PINS 6 5 4 6 PIN POSITIONS USED all 1, 2, 3, 5, 6 2, 3, 5, 6 all WINDING AREA (mm2) 15.0 15.0 15.0 2 × 7.0 AVERAGE AREA WINDING LENGTH OF PRODUCT WIDTH TURN Ae x Aw (mm) (mm) (mm4) 6.3 6.3 6.3 2×3 30.0 30.0 30.0 30.0 465 465 465 2 x 217 TYPE NUMBER CSV-RM6S-1S-6P-G(1) CSV-RM6S-1S-5P-G(1) CSV-RM6S-1S-4P-G(1) CSV-RM6S-2S-6P-G(1) 2008 Sep 01 1211 Ferroxcube RM, RM/I, RM/ILP cores and accessories General data PARAMETER Coil former material Solder pad material Maximum operating temperature Resistance to soldering heat Solderability SPECIFICATION RM6S unsaturated polyester (UP), glass-reinforced, flame retardant in accordance with “UL 94V-0” ; UL file number E61040 (M) copper-clad steel, tin (Sn) plated 180 °C, “IEC 60085”, class H “IEC 60068-2-20” , Part 2, Test Tb, method 1B, 350 °C, 3.5 s “IEC 60068-2-20”, Part 2, Test Ta, method 1 7.85 −0.1 6.26 min. 12.7 7.62 handbook, full pagewidth 0.52 0.87 0.8 1 +0.15 ∅12.3 −0.2 ∅7.45 −0.1 ∅0.5 0.65 min. 6.5 +0.05 8.4 min. 5 2.54 CBW515 Dimensions in mm. Fig.5 Coil former for RM6S; 8-pins. Winding data and area product for RM6S coil former NUMBER OF SECTIONS 1 NUMBER OF PINS 8 WINDING AREA (mm2) 14.5 WINDING WIDTH (mm) 6.26 AVERAGE LENGTH OF TURN (mm) 30.7 AREA PRODUCT Ae x Aw (mm4) 450 TYPE NUMBER CSV-RM6S-1S-8P 2008 Sep 01 1212 Ferroxcube RM, RM/I, RM/ILP cores and accessories MOUNTING PARTS handbook, halfpage RM6S General data ITEM Clamping force Clip material Clip plating Solderability Type number ≈20 N steel silver (Ag) “IEC 60 068-2-20”, Part 2, Test Ta, method 1 CLI/P-RM6 SPECIFICATION 2.3 1.6 12 9.8 0.7 MGC082 4.5 Dimensions in mm. Fig.6 Mounting clip for RM6S. 2008 Sep 01 1213 Ferroxcube RM, RM/I, RM/ILP cores and accessories DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS RM6S This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 1214