TX6.6-2.7-4.8

FERROXCUBE DATA SHEET TX6.6/2.7/4.8 Alloy powder toroids New data 2008 Sep 01 Ferroxcube Alloy powder toroids RING CORES (TOROIDS) Effective core parameters SYMBOL Σ(I/A) Ve Ie Ae m PARAMETER core factor (C1) effective volume effective length effective area mass of core (for µi 125) MPP Sendust VALUE UNIT 1.48 125 13.6 9.2 1.09 0.77 mm −1 mm 3 mm mm 2 g g g (0.16) coating EPOXY 2.41 ± 0.26 6.92 ± 0.32 TX6.6/2.7/4.8 High-Flux 1.03 Coating The cores are coated with epoxy. The colour is cream (Sendust), grey (MPP) or khaki (High-Flux). Maximum operating temperature is 200 °C. Parylene coating is also available (transparent, maximum operating temperature 130 °C). Isolation voltage AC isolation voltage : 1000 V (Parylene : 750 V). Contacts are applied on the edge of the ring core, which is also the critical point for the winding operation. B (mT) at GRADE MPP AL (nH) 14 ± 8 % 21 ± 8 % 50 ± 8 % 103 ± 8 % 122 ± 8 % 132 ± 8 % 144 ± 8 % 165 ± 8 % 247 ± 8 % Sendust 50 ± 12 % 62 ± 12 % 74 ± 12 % 103 ± 12 % High-Flux 12 ± 8 % 21 ± 8 % 50 ± 8 % 103 ± 8 % 122 ± 8 % 132 ± 8 % 2008 Sep 01 µi 14 26 60 125 147 160 173 200 300 60 75 90 125 14 26 60 125 147 160 5.1 ± 0.32 MFP151 Dimensions in mm. Fig.1 TX6.6/2.7/4.8 ring core. CORE LOSS (W) at f = 100 kHz; ˆ B = 100 mT; T = 25 °C 0.188 0.150 0.094 0.094 0.100 0.100 0.100 0.188 0.188 0.107 0.107 0.107 0.107 0.314 0.251 0.226 0.251 0.276 0.439 TYPE NUMBER TX6.6/4.8-M2-A14 TX6.6/4.8-M2-A21 TX6.6/4.8-M2-A50 TX6.6/4.8-M2-A103 TX6.6/4.8-M2-A122 TX6.6/4.8-M2-A132 TX6.6/4.8-M2-A144 TX6.6/4.8-M2-A165 TX6.6/4.8-M2-A247 TX6.6/4.8-S7-A50 TX6.6/4.8-S7-A62 TX6.6/4.8-S7-A74 TX6.6/4.8-S7-A103 TX6.6/4.8-H2-A12 TX6.6/4.8-H2-A21 TX6.6/4.8-H2-A50 TX6.6/4.8-H2-A103 TX6.6/4.8-H2-A122 TX6.6/4.8-H2-A132 H = 100 kA/m; f = 10 kHz; T = 25 °C ≥ 640 ≥ 700 ≥ 760 ≥ 800 ≥ 800 ≥ 800 ≥ 800 ≥ 800 ≥ 800 ≥ 1030 ≥ 1040 ≥ 1050 ≥ 1060 ≥ 890 ≥ 980 ≥ 1280 ≥ 1370 ≥ 1385 ≥ 1400 1809 Ferroxcube Alloy powder toroids DATA SHEET STATUS DEFINITIONS DATA SHEET STATUS Preliminary specification Product specification PRODUCT STATUS Development DEFINITIONS TX6.6/2.7/4.8 This data sheet contains preliminary data. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. This data sheet contains final specifications. Ferroxcube reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Production DISCLAIMER Life support applications  These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Ferroxcube customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Ferroxcube for any damages resulting from such application. PRODUCT STATUS DEFINITIONS STATUS Prototype Design-in Preferred Support INDICATION DEFINITION These are products that have been made as development samples for the purposes of technical evaluation only. The data for these types is provisional and is subject to change. These products are recommended for new designs. These products are recommended for use in current designs and are available via our sales channels. These products are not recommended for new designs and may not be available through all of our sales channels. Customers are advised to check for availability. 2008 Sep 01 1810