843002KT15N

MULTILAYER FEATURES • High frequency • High Q • High IDC Ceramic Chip Inductor APPLICATIONS • High frequency circuits for portable telephone, PHS, wireless communication, etc. 8430 Series CONTENTS Mechanical & Schematic Part Numbering Electrical Specs - 0603 Electrical Specs - 0402 PAGE 1 1 2 3 Available in 2 sizes: 0603 for 1.0 nH to 220 nH 0402 for 1.0 nH to 120 nH Environmental Characteristics 4 Packaging 4 MECHANICAL AND SCHEMATIC (All dimensions in millimeters) SCHEMATIC SIZE 0603 0402 Range (nH) 1.0 - 220 1.0 - 120 A 1.6±0.2 1.0±0.15 B 0.8±0.15 0.5±0.15 C 0.8±0.15 0.5±0.15 D 0.3±0.2 0.25±0.15 PART NUMBERING 8430 8430 Inductance Code 8430 XX X X XXX 4N7 = 4.7 nH 15N = 15 nH R10 = 100 nH T = Tape & Reel S = ±0.3 nH J = ±5% K = ±10% ISSUE: P1 11/06/02 Packaging Code Inductance Tolerance Code Dimension Code Part Number 03 = 0603 (EIA) 02 = 0402 (EIA) 8430 = Multilayer Chip Inductor Continued 229 Colonnade Road, Ottawa, Ontario, Canada K2E 7K3 Tel: (613) 226-1626 Fax: (613) 226-7124 www.filtran.com An ISO 9001 Registered Company Page 1 of 4 MULTILAYER Ceramic Chip Inductor 8430 Series ELECTRICAL SPECIFICATIONS @ 25˚C 0603 Multilayer Chip Inductors Inductance (nH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 150 180 220 Tolerance S S S S S S S, K S, K S, K S, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K Q Min. 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 12 12 12 12 12 8 8 8 8 L/Q Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 50 50 50 RDC (Ω MAX) 0.10 0.10 0.10 0.15 0.15 0.20 0.25 0.25 0.30 0.30 0.35 0.40 0.45 0.50 0.55 0.60 0.65 0.70 0.80 0.85 1.00 1.10 1.20 1.80 2.00 2.30 2.40 2.70 2.80 S.R.F. Typical (MHz) >17000 >17000 >17000 13000 12000 8600 6500 6300 5400 4600 4500 3800 3700 3200 2900 2100 2100 2000 1600 1500 1200 1100 1000 850 750 700 650 550 450 IDC (mA MAX) 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 300 ISSUE: P1 11/06/02 8430 Continued 229 Colonnade Road, Ottawa, Ontario, Canada K2E 7K3 Tel: (613) 226-1626 Fax: (613) 226-7124 www.filtran.com An ISO 9001 Registered Company Page 2 of 4 MULTILAYER Ceramic Chip Inductor 8430 Series ELECTRICAL SPECIFICATIONS @ 25˚C 0402 Multilayer Chip Inductors Inductance (nH) 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 120 Tolerance S S S S S S S, K S, K S, K S, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K J, K Q Min. 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 L/Q Test Frequency (MHz) 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 50 RDC (Ω MAX) 0.12 0.12 0.13 0.14 0.16 0.17 0.19 0.22 0.24 0.27 0.32 0.40 0.45 0.50 0.60 0.65 0.80 0.90 1.00 1.20 1.30 2.00 2.20 2.50 2.50 2.50 S.R.F. Typical (MHz) >15000 >15000 >15000 14000 12000 9500 8500 7000 6000 5400 5000 4600 3700 3200 3100 2900 2100 1900 1600 1400 1200 1100 1000 900 850 750 IDC (mA MAX) 300 300 300 300 300 300 300 300 300 300 250 250 250 250 250 200 200 200 200 150 150 150 100 100 100 100 ISSUE: P1 11/06/02 8430 Continued 229 Colonnade Road, Ottawa, Ontario, Canada K2E 7K3 Tel: (613) 226-1626 Fax: (613) 226-7124 www.filtran.com An ISO 9001 Registered Company Page 3 of 4 MULTILAYER Ceramic Chip Inductor 8430 Series ENVIRONMENTAL CHARACTERISTICS Item Bending Strength Specification Appearance: No damage Test Methods Test device shall be soldered on the substrate Substrate Dimension: 95x23x1.5mm Deflection: 2.0mm Keeping Time: 30sec Pre-heating: 120±20 ˚C, 1min Solder Temperature: 260±10 ˚C Immersion Time: 3±1sec Measured after exposure in the room condition for 24hrs Pre-heating: 120±20 ˚C, 1min Solder Temperature: 230±10 ˚C Immersion Time: 3±1sec 1 2 Resistance to Soldering Heat Solderability Appearance: No damage L change: within±10% Q change: within±20% The electrodes shall be at least 75% covered with new solder coating L change: within±10% Q change: within±20% 3 4 Temperature Cycle One Cycle: One cycle/step 1: 100±5 ˚C for 30±1min step 2: -40±3 ˚C for 30±1min Total: 100cycles Measured after exposure in the room condition for 24hrs Temperature: 40±2 ˚C Relative Humidity: 90~95% Time: 1000hrs Measured after exposure in the room condition for 24hrs Temperature: 85±2 ˚C Applied Current: Rated Current Time: 1000hrs Measured after exposure in the room condition for 24hrs Temperature: -40±5 ˚C Time: 1000hrs Measured after exposure in the room condition for 24hrs 5 Humidity Resistance 6 Heat Life 7 Cold Resistance PACKAGING Packaging Quanitity Packaging Series 8430-03 8430-02 Unit: pcs pcs/wheel 4,000 10,000 Reel Dimensions Series 8430-03 8430-02 A 178 178 B 60 60 C 12 12 8430 ISSUE: P1 11/06/02 Unit: mm D 1.5 1.5 Emboss Plastic Tape Specifications Series 8430-03 8430-02 A 1.1 0.65 B 1.9 1.15 K0 0.95 0.6 W 8 8 P 4 2 F 3.5 3.5 Unit: mm K 0.95 0.6 229 Colonnade Road, Ottawa, Ontario, Canada K2E 7K3 Tel: (613) 226-1626 Fax: (613) 226-7124 www.filtran.com An ISO 9001 Registered Company Page 4 of 4