FDB-1048

PRODUCT BRIEF Key Features FDB-1048 Wavelength Tuning Evaluation Board  Compact and portable design for field use with any laptop  No external power required (powered off laptop USB port)  User Friendly GUI allows Overview The FDB-1048 is a USB-connected interface unit for T-XFP and T-SFP+ transceivers. Access to the I2C interface of the transceiver, as well as interfacing some other hardware signals such as MOD_ ABS, RX_LOS and TX_DISABLE is possible via a PC connection. for tuning by Wavelength, This connection is made through USB 2.0, via Windows built-in HID driver. A proprietary Frequency, or Channel Number protocol controls and communicates with the processor in the FDB-1048 from the  Able to wavelength tune an SFP+ or XFP module with the same box different PC applications. It has a convenient small and robust design, which together with the simple USBonly powered solution, makes it the perfect tool also for using in field applications. Applications include Part number and Serial number (PID) readouts and tuning a Tunable Applications  Used for setting the Wavelength or Channel on Finisar’s Tunable XFP and Tunable SFP+ products XFP or SFP+ transceiver. The three LEDs on the front panel represent (bottom-top): “Module Present”, “Activity” and “RX LOS”. Parameter 1389 Moffett Park Drive Sunnyvale, CA 94089-1133 www.finisar.com Phone: +1-408-548-1000 Sales: +1-408-541-5690 Email: sales@finisar.com Value Size 30 mm (H) x 81 mm (W) x 167 mm (D) Weight 0.3 kg Operating Temp 0 °C to +45 °C (32 °F to 113 °F) Compliance XFP MSA Interface One XFP Port, Hot-pluggable; one SFP+ Port, Hot-pluggable Management Port USB 2.0 (High-power device) Supply Voltage 5V (USB) Power Consumption < 1W (without transceivers) Max Power Consumption 5W (with dual-input USB mating cable, USB only delivers 2.5W) Visit Our Website © 2015 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation. Features and specifications are subject to change without notice. 05/15 Visual Indicators 3 LED status indicators (Green) for “Module Present”, “Activity” and “RX LOS”