FTLF1324P2WTL

Finisar Product Specification 4 Gigabit RoHS Compliant Long-Wavelength SFP Transceiver FTLF1324P2xTy PRODUCT FEATURES • • • • • • • • • • Up to 4.25Gb/s bi-directional data links Hot-pluggable SFP footprint Built-in digital diagnostic functions 1310nm Fabry-Perot laser transmitter Duplex LC connector RoHS compliant and Lead Free Up to 4 km at 4.25 Gb/s and 10 km at ≤ 2.125 Gb/s on 9/125μm SMF Metal enclosure, for lower EMI Single 3.3V power supply Industrial operating temperature range: -40°C to 85°C APPLICATIONS • • Tri Rate 1.06 / 2.125 / 4.25 Gb/s Fibre Channel 1.25Gb/s 1000Base-LX Ethernet and 1000Base-LX10 (Rate selectable version) Finisar’s FTLF1324P2xTy Small Form Factor Pluggable (SFP) transceivers are compatible with the Small Form Factor Pluggable Multi-Sourcing Agreement (MSA)1. They are compatible with Fibre Channel FC-PI-2 10.02 standard for 4km distances at 4.25 Gb/s and 10km distances at 2.125 and 1.06 Gb/s. Rate selectable versions are also simultaneously compatible with Gigabit Ethernet 1000Base-LX as specified in IEEE Std 802.33 and 1000Base-LX10 as specified in IEEE Draft P802.3ah/D2.04. The product is RoHS compliant and lead-free per Directive 2002/95/EC5 and Finisar Application Note AN-2038. PRODUCT SELECTION FTLF1324P2xTy x y W B L V Wide Extraction Bail Narrow Extraction Bail Non Rate Selectable - 1x, 2x, 4x Fibre Channel Rate Selectable - 1x, 2x, 4x Fibre Channel and Gigabit Ethernet © Finisar Corporation August 31, 2006 Rev F Page 1 FTLF1324P2xTy Industrial Temp. SFP Product Specification – August 2006 Finisar I. Pin 1 2 3 4 5 6 7 Pin Descriptions Symbol VEET TFAULT TDIS MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) Rate Select Name/Description Transmitter Ground (Common with Receiver Ground) Transmitter Fault. Not supported. Transmitter Disable. Laser output disabled on high or open. Module Definition 2. Data line for Serial ID. Module Definition 1. Clock line for Serial ID. Module Definition 0. Grounded within the module. Open or Low = 1.063 Gb/s or 2.125 Gb/s Fibre Channel, 1.25 Gb/s Gigabit Ethernet (Low Bandwidth) High = 2.125 or 4.25 Gb/s Fibre Channel (High Bandwidth) Loss of Signal indication. Logic 0 indicates normal operation. Receiver Ground (Common with Transmitter Ground) Receiver Ground (Common with Transmitter Ground) Receiver Ground (Common with Transmitter Ground) Receiver Inverted DATA out. AC Coupled Receiver Non-inverted DATA out. AC Coupled Receiver Ground (Common with Transmitter Ground) Receiver Power Supply Transmitter Power Supply Transmitter Ground (Common with Receiver Ground) Transmitter Non-Inverted DATA in. AC Coupled. Transmitter Inverted DATA in. AC Coupled. Transmitter Ground (Common with Receiver Ground) Ref. 1 2 3 3 3 4 8 9 10 11 12 13 14 15 16 17 18 19 20 LOS VEER VEER VEER RDRD+ VEER VCCR VCCT VEET TD+ TDVEET 5 1 1 1 1 1 1 Notes: 1. Circuit ground is internally isolated from chassis ground. 2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS