FWLF1634RL55

Finisar Preliminary Product Specification 4Gbps Long-Reach DWDM SFP Transceiver FWLF1634Ryxx PRODUCT FEATURES • • • • • • • • • • • Up to 4.25 Gb/s bi-directional links Hot-pluggable SFP footprint Temperature-stabilized DWDMrated DFB laser transmitter 100GHz ITU Grid, C-Band Low dispersion DFB laser Extended operating range: -5°C to 70°C case temperature Wavelength controlled within ± 0.1 nm over life and temperature Extended link budget with APD receiver technology 4x FC compliant 1x/2x, GbE compliant* OC-48 LR-2 compliant* • • • APPLICATIONS Amplified DWDM networks Bandwidth aggregation Ring topologies with fixed and reconfigurable OADMs Finisar’s Dense Wavelength-Division Multiplexing (DWDM) transceivers offer DWDM transport with dramatically lower power and cost in a standard pluggable Small Form Factor Pluggable (SFP) package1. The FWLF1634R is designed expressly for service providers deploying DWDM networking equipment in metropolitan access and core networks. Basic digital diagnostic features for the FWLF1634R are implemented as described in Finisar Application Note AN-2030, “Digital Diagnostic Monitoring Interface for Optical Transceivers”4. Enhanced diagnostic features are available as described in the DWDM SFP MSA6. (*when ordered with rate selection option, and used in low rate mode) © Finisar Corporation Rev C2, Feb.2009 PRELIMINARY Page 1 Finisar PRODUCT SELECTION FWLF1634Ryxx y xx L V Non Rate Selectable - 4x Fibre Channel Rate Selectable - 1x, 2x, Fibre Channel, Gigabit Ethernet DWDM Wavelength (see table below) Product Code FWLF1634Ry17 FWLF1634Ry18 FWLF1634Ry19 FWLF1634Ry20 FWLF1634Ry21 FWLF1634Ry22 FWLF1634Ry23 FWLF1634Ry24 FWLF1634Ry25 FWLF1634Ry26 FWLF1634Ry27 FWLF1634Ry28 FWLF1634Ry29 FWLF1634Ry30 FWLF1634Ry31 FWLF1634Ry32 FWLF1634Ry33 FWLF1634Ry34 FWLF1634Ry35 FWLF1634Ry36 FWLF1634Ry37 FWLF1634Ry38 FWLF1634Ry39 FWLF1634Ry40 FWLF1634Ry41 FWLF1634Ry42 FWLF1634Ry43 FWLF1634Ry44 FWLF1634Ry45 FWLF1634Ry46 FWLF1634Ry47 FWLF1634Ry48 FWLF1634Ry49 FWLF1634Ry50 FWLF1634Ry51 FWLF1634Ry52 FWLF1634Ry53 FWLF1634Ry54 FWLF1634Ry55 FWLF1634Ry56 FWLF1634Ry57 FWLF1634Ry58 FWLF1634Ry59 FWLF1634Ry60 FWLF1634Ry61 Frequency (THz) 191.7 191.8 191.9 192.0 192.1 192.2 192.3 192.4 192.5 192.6 192.7 192.8 192.9 193.0 193.1 193.2 193.3 193.4 193.5 193.6 193.7 193.8 193.9 194.0 194.1 194.2 194.3 194.4 194.5 194.6 194.7 194.8 194.9 195.0 195.1 195.2 195.3 195.4 195.5 195.6 195.7 195.8 195.9 196.0 196.1 Center Wavelength (nm) 1563.86 1563.05 1562.23 1561.42 1560.61 1559.79 1558.98 1558.17 1557.36 1556.55 1555.75 1554.94 1554.13 1553.33 1552.52 1551.72 1550.92 1550.12 1549.32 1548.51 1547.72 1546.92 1546.12 1545.32 1544.53 1543.73 1542.94 1542.14 1541.35 1540.56 1539.77 1538.98 1538.19 1537.40 1536.61 1535.82 1535.04 1534.25 1533.47 1532.68 1531.90 1531.12 1530.33 1529.55 1528.77 © Finisar Corporation Rev C2, Feb.2009 PRELIMINARY Page 2 FWLF1634Ryxx DWDM SFP Preliminary Product Specification – February 2009 Finisar I. Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pin Descriptions Symbol VEET TFAULT TDIS MOD_DEF(2) MOD_DEF(1) MOD_DEF(0) Rate Select LOS VEER VEER VEER RDRD+ VEER VCCR VCCT VEET TD+ TDVEET Name/Description Transmitter Ground (Common with Receiver Ground) Transmitter Fault Transmitter Disable. Laser output disabled on high or open Module Definition 2. Data line for Serial ID Module Definition 1. Clock line for Serial ID Module Definition 0. Grounded within the module No connection required Loss of Signal indication. Logic 0 indicates normal operation Receiver Ground (Common with Transmitter Ground) Receiver Ground (Common with Transmitter Ground) Receiver Ground (Common with Transmitter Ground) Receiver Inverted DATA out. AC Coupled Receiver Non-inverted DATA out. AC Coupled Receiver Ground (Common with Transmitter Ground) Receiver Power Supply Transmitter Power Supply Transmitter Ground (Common with Receiver Ground) Transmitter Non-Inverted DATA in. 100 ohm termination between TD+ and TD-, AC Coupled thereafter Transmitter Inverted DATA in. See TD+ Transmitter Ground (Common with Receiver Ground) Ref. 1 2 3 3 3 4 5 1 1 1 1 1 1 Notes: 1. Circuit ground is internally isolated from chassis ground. 2. Laser output disabled on TDIS >2.0V or open, enabled on TDIS