1N5401

Formosa MS Axial Leaded General Purpose Rectifiers 1N5400 THRU 1N5408 List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Taping & bulk specifications for AXIAL devices.................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-222115 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded General Purpose Rectifiers 1N5400 THRU 1N5408 3.0A Axial Leaded General Purpose Rectifiers - 50V-1000V Package outline Features DO-201AD • Axial lead type devices for through hole design. • High current capability. • High surge capability. • Silicon rubber coating chip junction. • Lead-free parts meet environmental standards of 1.0(25.4) MIN. MIL-STD-19500 /228 .220(5.6) • Suffix "-H" indicates Halogen-free parts, ex. 1N5400-H. .197(5.0) DIA. .375(9.5) .285(7.2) Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-201AD • Lead : Axial leads, solderable per MIL-STD-202, 1.0(25.4) MIN. .052(1.3) .048(1.2) DIA. Method 208 guranteed • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 1.10 gram Dimensions in inches and (millimeters) Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) Symbol CONDITIONS Forward rectified current See Fig.2 Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current V R = V RRM T J = 100 OC Thermal resistance Diode junction capacitance Junction to ambient f=1MHz and applied 4V DC reverse voltage Storage temperature SYMBOLS *1 V RRM (V) *3 VR (V) 1N5400 50 35 50 1N5401 100 70 100 1N5402 200 140 200 1N5404 400 280 400 1N5406 600 420 600 1N5407 800 560 800 1N5408 1000 700 1000 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 *4 VF (V) Operating temperature T J, ( OC) TYP. MAX. UNIT IO 3.0 A I FSM 200 A 5.0 IR 50 R θJA 30 CJ 40 T STG V RMS*2 (V) MIN. -65 μA O C/W pF +175 O C *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage 1.00 -55 to +125 Page 2 *4 Maximum forward voltage@I F=3.0A Document ID Issued Date Revised Date DS-222115 2008/02/10 2010/03/10 Revision C Page. 6 Rating and characteristic curves (1N5400 THRU 1N5408) FIG.1-TYPICAL FORWARD FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 10 3.0 1.0 3.0 2.5 2.0 Single Phase 1.5 Half Wave 60Hz Resistive Or Inductive Load 1.0 0.375"(9.5mm) Lead Length 0.5 0 0 20 40 60 80 100 120 140 160 180 200 AMBIENT TEMPERATURE,( C) TJ=25 C Pulse Width 300us 1% Duty Cycle 0.1 FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .01 .6 .7 .8 .9 1.0 1.1 1.2 1.3 FORWARD VOLTAGE,(V) FIG.3 - TYPICAL REVERSE CHARACTERISTICS PEAK FORWARD SURGE CURRENT,(A) INSTANTANEOUS FORWARD CURRENT,(A) 50 250 200 150 8.3ms Single Half TJ=25 C Sine Wave 100 JEDEC method 50 0 1 100 5 50 10 100 NUMBER OF CYCLES AT 60Hz FIG.5-TYPICAL JUNCTION CAPACITANCE 140 TJ=100 C JUNCTION CAPACITANCE,(pF) REVERSE LEAKAGE CURRENT, (uA) 10 1.0 TJ=25 C .1 120 100 80 60 40 20 .01 0 0 20 40 60 80 .01 .1 .5 1 5 10 50 100 Revision Page. REVERSE VOLTAGE,(V) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 .05 100 120 140 Page 3 Document ID Issued Date Revised Date DS-222115 2008/02/10 2010/03/10 C 6 Formosa MS Axial Leaded General Purpose Rectifiers 1N5400 THRU 1N5408 Pinning information Pin Pin1 Pin2 Simplified outline cathode anode Symbol 1 2 1 2 Marking Type number 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Marking code 1N5400 1N5401 1N5402 1N5404 1N5406 1N5407 1N5408 Taping & bulk specifications for AXIAL devices 52.4mm 17mm DIA. 55mm Max. A 17mm DIA. 72mm DIA. 71mm Max. 355mm OFF Center both sids 1.0mm Max OFF Alignment 1.2mm 6.3mm REEL PACKING DEVICE Q'TY 1 COMPONENT CARTON Q'TY 2 APPROX. CASE (PCS / REEL) SPACING SIZE (PCS / CARTON) CROSS "A" in FIG. A (m/m) 10 mm 380 * 340 * 370 TYPE DO-201AD 1,200 WEIGHT(kg) 4,800 9.1 AMMO PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS (m/m) (m/m) TYPE DO-201AD 1,200 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 260 * 83 * 160 440 * 270 * 340 Page 4 WEIGHT(kg) 12,000 17.0 Document ID Issued Date Revised Date DS-222115 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded General Purpose Rectifiers 1N5400 THRU 1N5408 BULK PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS TYPE (m/m) DO-201AD 500 WEIGHT(kg) (m/m) 305 * 73 * 40 347 * 320 * 271 12,000 16.4 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date DS-222115 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded General Purpose Rectifiers 1N5400 THRU 1N5408 High reliability test capabilities Item Test Conditions Reference o 1. Solder Resistance at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 oC for 5 sec. MIL-STD-202F METHOD-208 3. Pull Test 2.0kg in axial lead direction for 10 sec. I F=I O 4. Bend Lead 5. High Temperature Reverse Bias 6. Forward Operation Life 7. Intermittent Operation Life 8. Pressure Cooker MIL-STD-202F METHOD-211A 2.0kg weight applied to each lead bending arc 90 o±5 o for 3 times MIL-STD-202F METHOD-211A V R=80% rate at T J=125 oC for 168 hrs. MIL-STD-750D METHOD-1038 Rated average rectifier current at T A=25 oC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min, on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 15P SIG at T A=121 oC for 4 hrs. MIL-STD-750D METHOD-1051 9. Temperature Cycling -55 oC to +125 oC dwelled for 30 min. and transferred for 5min. total 10 cycles. 10. Forward Surge 8.3ms single half sine-wave one surge. MIL-STD-750D METHOD-4066-2 11. Humidity at T A=85 oC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 12. High Temperature Storage Life at 175 oC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 6 Document ID Issued Date Revised Date DS-222115 2008/02/10 2010/03/10 Revision C Page. 6