ES5K

Formosa MS SURFACE MOUNT SUPER FAST RECTIFIER ES5J THRU ES5M 5.0 A Surface Mount Super Fast Rectifiers-600 -1 0 00V Package outline Features SMC/DO-214AB The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Super fast switching for high efficiency Low reverse leakage Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 C/10 seconds at terminals Glass passivated chip junction Compliant to RoHS Directive 2011/65/EU 0.245(6.22) 0.220(5.59) 0.126 (3.20) 0.114 (2.90) 0.280(7.11) 0.260(6.60) 0.012(0.305) 0.006(0.152) 0.103(2.62) 0.079(2.06) Mechanical data Case: JEDEC DO-214AB molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.007 ounce, 0.25 grams 0.060(1.52) 0.030(0.76) 0.320(8.13) 0.305(7.75) Dimensions in inches and (millimeters) Maximum ratings and Electrical Characteristics (AT PARAMETER 0.008(0.203)MAX. T A=25 oC unless otherwise noted) CONDITIONS Symbol MIN. TYP. MAX. UNIT Forward rectified current See Fig.2 IO 5.0 A Forward surge current 8.3ms single half sine-wave (JEDEC methode) I FSM 150 A V R = V RRM T A = 25 OC Reverse current V R = V RRM T A = 100 C Thermal resistance Junction to ambient NOTE 1 Diode junction capacitance f=1MHz and applied 4V DC reverse voltage Storage temperature V RMS*2 (V) *3 VR (V) ES5J 600 420 600 ES5K 800 560 800 700 100 0 ES5M 100 0 *4 VF (V) *5 t rr (ns) Operating temperature T J, ( OC) 35 -55 to +150 40 CJ 1 80 O pF O +150 -65 C/W C *1 Repetitive peak reverse voltage *2 RMS voltage 1.70 3.20 *3 Continuous reverse voltage *4 Maximum forward voltage@I F=5.0A Note: 1.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas 2. Reverse recovery time test condition, I F =0.5A, I R =1.0A, I RR =0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 μA 50 R θJA T STG *1 V RRM (V) SYMBOLS 5.0 IR O Page 1 *5 Maximum Reverse recovery time, note 2 Document ID Issued Date DS-1214291 2008/02/10 Revised Date 2010/03/10 Revision E Page. 3 Formosa MS SURFACE MOUNT SUPER FAST RECTIFIER ES5J THRU ES5M FIG. 1- FORWARD CURRENT DERATING CURVE 5.0 4.0 3.0 Single Phase Half Wave 60Hz Resistive or inductive Load 2.0 1.0 0 0 25 50 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT £PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES Rating and characteristic curves ( ES5J THRU ES5M ) 75 100 125 150 200 160 ES5J-US5M 120 80 40 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 0 175 1 10 LEAD TEMPERATURE, C 100 NUMBER OF CYCLES AT 60 Hz FIG. 4-TYPICAL REVERSE CHARACTERISTICS FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 1,000 INSTANTANEOUS FORWARD CURRENT,AMPERES 20 TJ=25 C 10 PULSE WIDTH=300 ms 1%DUTY CYCLE 1 0.1 ES5J ES5K-ES5M 0.01 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2 3.6 4.0 100 10 TJ=100 C 1 TJ=25 C 0.1 0.01 INSTANTANEOUS FORWARD VOLEAGE, VOLTS 20 TJ=25 C 40 60 80 100 FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/W JUNCTION CAPACITANCE, pF 150 20 PERCENTAGE OF PEAK REVERSE VOLTAGE,% FIG. 5-TYPICAL JUNCTION CAPACITANCE 400 0 100 10 1 0.1 0.01 0.1 1 10 100 1 0.1 1.0 10 100 REVERSE VOLTAGE,VOLTS http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 t,PULSE DURATION,sec. Page 2 Document ID Issued Date DS-1214291 2008/02/10 Revised Date 2010/03/10 Revision E Page. 3 Formosa MS SURFACE MOUNT SUPER FAST RECTIFIER ES5J THRU ES5M Pinning information Pin Pin1 Pin2 Simplified outline cathode anode 1 Symbol 2 1 2 Marking Type number Marking code ES5J ES5J ES5K ES5K ES5M ES5M Example LOGO FMS ES5K Marking code Suggested solder pad layout C A B Dimensions in inches and (millimeters) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 PACKAGE A B C SMC 0.132 (3.30) 0.100 (2.50) 0.176(4.40) Page 3 Document ID Issued Date DS-1214291 2008/02/10 Revised Date 2010/03/10 Revision E Page. 3