HER105

Formosa MS Axial Leaded High Effciency Rectifiers HER101 THRU HER108 List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Taping & bulk specifications for AXIAL devices.................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-222306 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded High Effciency Rectifiers HER101 THRU HER108 1.0A Axial Leaded High Effciency Rectifiers-50-1000V Package outline Features DO-41 • Axial lead type devices for through hole design. • High current capability. • Ultrafast recovery time for high efficiency. • High surge current capability. • Silicon rubber coating chip junction. • Lead-free parts meet RoHS requirments. • Suffix "-H" indicates Halogen free parts, ex. HER101-H. 1.0(25.4) MIN. .107(2.7) .080(2.0) DIA. .205(5.2) .166(4.2) Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-41 • Lead : Axial leads, solderable per MIL-STD-202, .028(.7) DIA. Method 208 guranteed • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 0.33 gram Dimensions in inches and (millimeters) Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) CONDITIONS O Forward rectified current Ambient temperature = 50 C Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current f=1MHz and applied 4V DC reverse voltage Storage temperature UNIT IO 1.0 A I FSM 30 A V RMS*2 (V) *3 VR (V) HER101 50 35 50 HER102 100 70 100 HER103 200 140 200 HER104 300 210 300 HER105 400 280 400 HER106 600 420 600 HER107 800 560 800 HER108 1000 700 1000 *4 VF (V) MIN. TYP. 5.0 Operating temperature T J, ( OC) *5 t rr (ns) μA 150 CJ T STG *1 V RRM (V) SYMBOLS MAX. Symbol IR V R = V RRM T J = 100 OC Diode junction capacitance 1.0(25.4) MIN. .034(.9) pF 20 +175 -65 O C *1 Repetitive peak reverse voltage *2 RMS voltage 1.00 50 *3 Continuous reverse voltage -55 to +125 1.30 *4 Maximum forward voltage@I F=1.0A *5 Maximum Reverse recovery time, note 1 1.85 75 Note 1. Reverse recovery time test condition, I F =0.5A, I R =1.0A, I RR =0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 2 Document ID Issued Date Revised Date DS-222306 2008/02/10 2010/03/10 Revision C Page. 6 Rating and characteristic curves (HER101 THRU HER108) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE FIG.1-TYPICAL FORWARD AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 10 8 5 10 ER ER 103 R1 06 ~H 04 ER R1 R1 01~ H HE HE HE 1.0 ~H INSTANTANEOUS FORWARD CURRENT,(A) 10 .1 1.2 1.0 0.8 0.6 Half Wave 60Hz 0.4 Resistive Or Inductive Load 0.375"(9.5mm) Lead Length 0.2 0 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE (°C) TJ = 25 .01 Single Phase Pulse Width = 300us 1% Duty Cycle FIG.4-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT .001 .2 .4 .6 .8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE,(V) FIG.3- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTICS 50W NONINDUCTIVE 10W NONINDUCTIVE ( ) (+) D.U.T. 25Vdc (approx.) PULSE GENERATOR (NOTE 2) ( ) 50 PEAK FORWAARD SURGE CURRENT,(A) 0 40 30 8.3ms Single Half TJ=25 C JEDEC method 10 0 1 5 (+) 1W NONINDUCTIVE Sine Wave 20 50 10 100 NUMBER OF CYCLES AT 60Hz OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. 2. Rise Time= 10ns max., Source Impedance= 50 ohms. FIG.5-TYPICAL JUNCTION CAPACITANCE 140 JUNCTION CAPACITANCE,(pF) trr | | | | | | | | +0.5A 0 -0.25A -1.0A 120 100 80 60 40 20 1cm SET TIME BASE FOR 50 / 10ns / cm 0 .01 .05 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 3 Document ID Issued Date Revised Date DS-222306 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded High Effciency Rectifiers HER101 THRU HER108 Pinning information Pin Pin1 Pin2 Simplified outline cathode anode Symbol 1 2 1 2 Marking Type number HER101 HER102 HER103 HER104 HER105 HER106 HER107 HER108 Marking code HER101 HER102 HER103 HER104 HER105 HER106 HER107 HER108 Taping & bulk specifications for AXIAL devices 52.4mm 17mm DIA. 55mm Max. A 17mm DIA. 72mm DIA. 71mm Max. 355mm OFF Center both sids 1.0mm Max OFF Alignment 1.2mm 6.3mm REEL PACKING DEVICE Q'TY 1 COMPONENT CARTON Q'TY 2 APPROX. CASE (PCS / REEL) SPACING SIZE (PCS / CARTON) CROSS "A" in FIG. A (m/m) TYPE DO-41 5,000 5 mm 360 * 340 * 370 WEIGHT(kg) 20,000 10.8 AMMO PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS (m/m) (m/m) TYPE DO-41 5,000 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 260 * 83 * 160 440 * 270 * 340 Page 4 WEIGHT(kg) 50,000 20.0 Document ID Issued Date Revised Date DS-222306 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded High Effciency Rectifiers HER101 THRU HER108 BULK PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS TYPE (m/m) DO-41 1,000 WEIGHT(kg) (m/m) 194 * 84 * 20 465 * 220 * 260 50,000 20.6 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 5 Document ID Issued Date Revised Date DS-222306 2008/02/10 2010/03/10 Revision C Page. 6 Formosa MS Axial Leaded High Effciency Rectifiers HER101 THRU HER108 High reliability test capabilities Item Test Conditions Reference o 1. Solder Resistance at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 oC for 5 sec. MIL-STD-202F METHOD-208 3. Pull Test 1.0kg in axial lead direction for 10 sec. I F=I O 4. Bend Lead 5. High Temperature Reverse Bias 6. Forward Operation Life 7. Intermittent Operation Life 8. Pressure Cooker MIL-STD-202F METHOD-211A 1.0kg weight applied to each lead bending arc 90 o±5 o for 3 times MIL-STD-202F METHOD-211A V R=80% rate at T J=125 oC for 168 hrs. MIL-STD-750D METHOD-1038 Rated average rectifier current at T A=25 oC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min, on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 15P SIG at T A=121 oC for 4 hrs. MIL-STD-750D METHOD-1051 9. Temperature Cycling -55 oC to +125 oC dwelled for 30 min. and transferred for 5min. total 10 cycles. 10. Forward Surge 8.3ms single half sine-wave one surge. MIL-STD-750D METHOD-4066-2 11. Humidity at T A=85 oC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 12. High Temperature Storage Life at 175 oC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 6 Document ID Issued Date Revised Date DS-222306 2008/02/10 2010/03/10 Revision C Page. 6