P6KE20CA

Formosa MS Axial Lead Transient Voltage Suppressor P6KE SERIES List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings ............................................................................. 2 Electrical characteristics................................................................... 3 Rating and characteristic curves........................................................ 4 Pinning information........................................................................... 5 Taping & bulk specifications for AXIAL devices.................................... 5 Suggested thermal profiles for soldering processes............................. 6 High reliability test capabilities........................................................... 7 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 1 DS-222804 Issued Date 2008/02/10 Revised Date Revision Page. 2016/04/07 D 7 Formosa MS Axial Lead Transient Voltage Suppressor P6KE SERIES 600W Axial Lead Transient Voltage Suppressors - 6.8V-600V Package outline Features DO-15 • Axial lead type devices for through hole design. • 600W peak pulse power capability with a 10/1000us waveform, repetition rate (duty cycle): 0.01% . • Excellent clamping capability. • Low incremental surge resistance. • Fast response time from 0V to V , typically less than 1.0(25.4) MIN. BR 1 pS for uni-directional & 5 nS for bi-directional types. • Ultra high-speed switching. • Glass passivated chip junction . • Lead-free parts meet environmental standards of MIL-STD-19500 /228 • Suffix "-H" indicates Halogen free parts, ex. P6ΚΕ6.8Α-H .140(3.6) .104(2.6) DIA. .300(7.6) .230(5.8) Mechanical data 1.0(25.4) MIN. .034(.9) • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-15 • Lead : Axial leads, solderable per MIL-STD-202, .028(.7) DIA. Method 208 guaranteed Dimensions in inches and (millimeters) • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 0.40 gram Maximum ratings (AT o T A=25 C unless otherwise noted) PARAMETER CONDITIONS Symbol Peak power dissipation with a 10/1000 us waveform, Note 1 & Fig. 1 P PPM Peak pulse current with a 10/1000 us waveform at T L=75°C lead length 0.375” (9.5 mm) I PPM Steady state power dissipation Peak forward surge current Maximum instantaneours forward voltage 8.3ms single half sine-wave (JEDEC Method), note 2 for uni-directional types only, at 50A, see note 3 Operating junction temperature range TYP. MAX. UNIT 600 W A See table 1 P M(AV) 5.0 W I FSM 100 A VF 3.5/5.0 V TJ Storage temperature range MIN. T STG +150 O C +150 O C Revised Date Revision Page. 2016/04/07 D 7 -55 -55 O Note 1. Non-repetitive current pulse, per Fig. 3 and derated above T A=25 C per Fig. 2 2. Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum 3. V F