S1M-B

Formosa MS SURFACE MOUNT GENERAL RECTIFIER S1A-B THRU S1M-B 1.0A Surface Mount General Purpose Rectifiers - 50V-1000V Package outline Features The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Low reverse leakage Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 250 C/10 seconds at terminals Glass passivated chip junction Compliant to RoHS Directive 2011/65/EU Suffix"-H" indicates Halogen-free part,ex.S1M-B-H SMB/DO-214AA 0.155(3.94) 0.130(3.30) 0.086 (2.20) 0.071 (1.80) 0.183(4.65) 0.160(4.05) 0.012(0.305) 0.006(0.152) 0.096(2.45) 0.081(2.05) Mechanical data Case: JEDEC DO-214AA molded plastic body Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight:0.003 ounce, 0.093 grams 0.060(1.52) 0.219(5.56) 0.202(5.14) Dimensions in inches and (millimeters) Maximum ratings and Electrical Characteristics (AT PARAMETER 0.008(0.203)MAX. 0.030(0.76) T A=25 oC unless otherwise noted) Symbol CONDITIONS MIN. TYP. MAX. UNIT Forward rectified current See Fig.2 IO 1.0 A Forward surge current 8.3ms single half sine-wave (JEDEC methode) I FSM 30 A V R = V RRM T A = 25 OC Reverse current O V R = V RRM T A = 100 C Thermal resistance Junction to ambient NOTE 1 Diode junction capacitance f=1MHz and applied 4V DC reverse voltage Storage temperature 5.0 IR R θJA 75 CJ 15 T STG μA 50 O pF O +150 -65 C/W C Note: 1.P.C.B. mounted with 0.2x0.2”(5.0x5.0mm) copper pad areas SYMBOLS *1 V RRM (V) V RMS*2 (V) *3 VR (V) S1A-B 50 35 50 S1B-B 100 70 100 S1D-B 200 140 200 S1G-B 400 280 400 S1J-B 600 420 600 S1K-B 800 560 800 S1M-B 1000 700 1000 http://www.formosagr.com TEL:886-755-27188611 FAX:886-755-27188568 *4 VF (V) Operating temperature T J, ( OC) *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage 1.10 -55 to +150 Page 1 *4 Maximum forward voltage@I F=1.0A Document ID Issued Date Revised Date Revision Page. FM-3010004 2003/03/08 2012/05/16 D 3 Formosa MS SURFACE MOUNT GENERAL RECTIFIER S1A-B THRU S1M-B Rating and characteristic curves AVERAGE FORWARD RECTIFIED CURRENT, AMPERES FIG. 1- FORWARD CURRENT DERATING CURVE 0.8 0.6 Single Phase Half Wave 60Hz Resistive or inductive Load 0.4 0.2 0 0 25 50 30 £PEAK FORWARD SURGE CURRENT, AMPERES 1.0 FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 75 100 125 150 25 20 15 10 175 5.0 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 1 10 LEAD TEMPERATURE, C NUMBER OF CYCLES AT 60 Hz FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG. 4-TYPICAL REVERSE CHARACTERISTICS 1,000 10 1 TJ=25 C PULSE WIDTH=300 ms 1%DUTY CYCLE 0.1 0.01 0.6 0.8 1.0 1.2 1.4 1.5 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES INSTANTANEOUS FORWARD CURRENT,AMPERES 20 100 TJ=100 C 1 0.1 TJ=25 C 0.01 0 20 40 60 80 100 PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE TRANSIENT THERMAL IMPEDANCE, C/W FIG. 5-TYPICAL JUNCTION CAPACITANCE 200 TJ=25 C 100 TJ=150 C 10 INSTANTANEOUS FORWARD VOLEAGE, VOLTS JUNCTION CAPACITANCE, pF 100 10 100 10 1 0.1 0.01 0.1 1 10 100 1 0.1 1.0 10 100 REVERSE VOLTAGE,VOLTS http://www.formosagr.com TEL:886-755-27188611 FAX:886-755-27188568 t,PULSE DURATION,sec. Page 2 Document ID Issued Date Revised Date Revision Page. FM-3010004 2003/03/08 2012/05/16 D 3 Formosa MS SURFACE MOUNT GENERAL RECTIFIER S1A-B THRU S1M-B Pinning information Pin Pin1 Pin2 Simplified outline cathode anode 1 Symbol 2 1 2 Marking Type number Example Marking code S1A-B S1B-B S1D-B S1G-B S1J-B S1K-B S1M-B S1A S1B S1D S1G S1J S1K S1M For Halogen D evice For Halogen-free Device LOGO LOGO FMS S1M-H FMS S1M Marking code Marking code Suggested solder pad layout C A B Dimensions in inches and (millimeters) http://www.formosagr.com TEL:886-755-27188611 FAX:886-755-27188568 PACKAGE A B C SMB 0.078 (2.00) 0.059 (1.50) 0.110 (2.80) Page 3 Document ID Issued Date Revised Date Revision Page. FM-3010004 2003/03/08 2012/05/16 D 3