SF24

Formosa MS Axial Leaded Super Fast Rectifiers SF21 THRU SF28 2.0A Axial Leaded Super Fast Rectifiers-50-600V Package outline DO-15 Features • Axial lead type devices for through hole design • High current capability. • Superfast recovery time for switching mode application. • High surge current capability. • Silicon rubber coating chip junction. • Lead-free parts meet RoHS requirments. • Suffix "-H" indicates Halogen free parts, ex. SF21-H. 1.0(25.4) MIN. .140(3.6) .104(2.6) DIA. .300(7.6) .230(5.8) Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-15 • Lead : Axial leads, solderable per MIL-STD-202, .023(.6) DIA. Method 208 guranteed • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 0.40 gram Dimensions in inches and (millimeters) Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) CONDITIONS O Forward rectified current Ambient temperature = 55 C Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current f=1MHz and applied 4V DC reverse voltage Storage temperature UNIT IO 2.0 A I FSM 60 A V RMS*2 (V) *3 VR (V) SF21 50 35 50 SF22 100 70 100 SF23 150 105 150 SF24 200 140 200 SF25 300 210 300 SF26 400 280 400 SF27 500 350 500 SF28 600 420 600 *4 VF (V) MIN. TYP. 5.0 Operating temperature T J, ( OC) *5 t rr (ns) µA 150 CJ T STG *1 V RRM (V) SYMBOLS MAX. Symbol IR V R = V RRM T J = 100 OC Diode junction capacitance 1.0(25.4) MIN. .034(.9) pF 60 +175 -65 O C *1 Repetitive peak reverse voltage *2 RMS voltage 0.95 *3 Continuous reverse voltage 35 -55 to +125 1.25 *4 Maximum forward voltage@I F=2.0A *5 Maximum Reverse recovery time, note 1 1.70 Note 1. Reverse recovery time test condition, I F =0.5A, I R =1.0A, I RR =0.25A http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Page 1 Document ID Issued Date Revised Date DS-222407 2008/02/10 2010/05/10 Revision C Page. 3 Rating and characteristic curves (SF21 THRU SF28) FIG.2-TYPICAL FORWARD CURRENT DERATING CURVE FIG.1- TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC trr 10W NONINDUCTIVE ( ) 25Vdc (approx.) D.U.T. PULSE GENERATOR (NOTE 2) ( ) 1W NONINDUCTIVE | | | | | | | | +0.5A (+) AVERAGE FORWARD CURRENT,(A) 50W NONINDUCTIVE 0 -0.25A (+) OSCILLISCOPE (NOTE 1) NOTES: 1. Rise Time= 7ns max., Input Impedance= 1 megohm.22pF. -1.0A 2. Rise Time= 10ns max., Source Impedance= 50 ohms. 1cm 2.4 2.0 1.6 Single Phase 1.2 Half Wave 60Hz Resistive Or Inductive Load 0.8 0.375"(9.5mm) Lead Length 0.4 0 SET TIME BASE FOR 0 25 50 75 100 125 150 175 AMBIENT TEMPERATURE,(°C) 50 / 10ns / cm FIG.4-TYPICAL REVERSE CHARACTERISTICS CHARACTERISTICS REVERSE LEAKAGE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT,(A) FIG.3-TYPICAL FORWARD FORWARD VOLTAGE,(V) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) FIG.6-TYPICAL JUNCTION CAPACITANCE 175 JUNCTION CAPACITANCE,(pF) PEAK FORWARD SURGE CURRENT,(A) FIG.5-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 150 125 100 75 50 25 0 .01 .1 .5 1 5 10 50 100 REVERSE VOLTAGE,(V) NUMBER OF CYCLES AT 60Hz http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 .05 Page 2 Document ID Issued Date Revised Date DS-222407 2008/02/10 2010/05/10 Revision C Page. 3 Formosa MS Axial Leaded Super Fast Rectifiers SF21 THRU SF28 Pinning information Pin Pin1 Pin2 cathode anode Simplified outline 1 Symbol 2 1 2 Marking Type number SF21 SF22 SF23 SF24 SF25 SF26 SF27 SF28 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Marking code SF21 SF22 SF23 SF24 SF25 SF26 SF27 SF28 Page 3 Document ID Issued Date Revised Date DS-222407 2008/02/10 2010/05/10 Revision C Page. 3