SR1150

Formosa MS Axial Leaded Schottky Barrier Rectifier SR120 THRU SR1200 List List................................................................................................. 1 Package outline............................................................................... 2 Features.......................................................................................... 2 Mechanical data............................................................................... 2 Maximum ratings .............................................................................. 2 Rating and characteristic curves........................................................ 3 Pinning information........................................................................... 4 Marking........................................................................................... 4 Taping & bulk specifications for AXIAL devices.................................... 4 Suggested thermal profiles for soldering processes............................. 5 High reliability test capabilities........................................................... 6 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 1 DS-222645 Issued Date 2008/02/10 Revised Date Revision Page. 2013/11/15 C 6 Formosa MS Axial Leaded Schottky Barrier Rectifier SR120 THRU SR1200 1.0A Axial Leaded Schottky Barrier Rectifiers - 20V-200V Package outline Features DO-41 • Axial lead type devices for through hole design. • Low power loss, high efficiency. • High current capability, low forward voltage drop. • High surge capability. • Guardring for overvoltage protection. • Ultra high-speed switching. • Silicon epitaxial planar chip, metal silicon junction. • Lead-free parts meet environmental standards of 1.0(25.4) MIN. .107(2.7) .080(2.0) DIA. MIL-STD-19500 /228 .205(5.2) • Suffix "-H" indicates Halogen free parts, ex. SR120-H. .166(4.2) Mechanical data • Epoxy : UL94-V0 rated flame retardant • Case : Molded plastic, DO-41 • Lead : Axial leads, solderable per MIL-STD-202, 1.0(25.4) MIN. .034(.9) .028(.7) DIA. Method 208 guaranteed Dimensions in inches and (millimeters) • Polarity: Color band denotes cathode end • Mounting Position : Any • Weight : Approximated 0.33 gram Maximum ratings and Electrical Characteristics (AT PARAMETER T A=25 oC unless otherwise noted) Symbol CONDITIONS Forward rectified current See Fig.1 Forward surge current 8.3ms single half sine-wave (JEDEC methode) V R = V RRM T J = 25 OC Reverse current Thermal resistance Diode junction capacitance f=1MHz and applied 4V DC reverse voltage Storage temperature SYMBOLS *1 V RRM (V) *3 VR (V) *4 VF (V) Operating temperature T J, ( OC) 0.55 -55 to +125 SR120 20 14 20 SR130 30 21 30 SR140 40 28 40 SR150 50 35 50 SR160 60 42 60 SR180 80 56 80 SR1100 100 70 100 SR1150 150 105 150 0.90 SR1200 200 140 200 0.95 MAX. UNIT 1.0 A I FSM 30 A 0.5 10 R θJA R θJL 50 15 CJ 110 T STG V RMS*2 (V) TYP. IR O V R = V RRM T J = 100 C Junction to ambient (Note 1) Junction to lead (Note 1) MIN. IO -65 mA O C/W pF +175 O C *1 Repetitive peak reverse voltage *2 RMS voltage *3 Continuous reverse voltage 0.70 *4 Maximum forward voltage@I F=1.0A 0.85 -55 to +150 Note 1:Thermal resistance Vertical P.C.B. mounted , with 1.5 X1.5"(38X38mm)copper pads http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 2 DS-222645 Issued Date 2008/02/10 Revised Date Revision Page. 2013/11/15 C 6 Rating and characteristic curves (SR120 THRU SR1200) FIG.1-TYPICAL FORWARD CURRENT DERATING CURVE FIG.2-TYPICAL FORWARD 50 0~ 0 00 14 12 SR SR 0~ 0.2 0 0 20 40 60 80 100 120 140 160 180 200 LEAD TEMPERATURE,(°C) PEAK FORWARD SURGE CURRENT,(A) FIG.3-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 3.0 15 0~ 20 0V 15 12 0.4 10 20 ~4 0V SR 0.6 50 ~6 0V 80 ~1 00 V 0.8 INSTANTANEOUS FORWARD CURRENT,(A) 1.0 SR AVERAGE FORWARD CURRENT,(A) CHARACTERISTICS 1.2 1.0 TJ=25 C Pulse Width 300us 1% Duty Cycle 0.1 8.3ms Single Half TJ=25 C Sine Wave .01 JEDEC method .1 .3 .5 .7 .9 1.1 1.3 1.5 FORWARD VOLTAGE,(V) FIG.5 - TYPICAL REVERSE CHARACTERISTICS 100 SR120-SR140 SR150-SR1200 NUMBER OF CYCLES AT 60Hz 10 REVERSE LEAKAGE CURRENT, (mA) FIG.4-TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE,(pF) 350 300 250 200 150 100 TJ=125°C 1.0 0.1 TJ=75°C 0.01 50 TJ=25°C 0 .01 .05 .1 .5 1 5 10 50 100 0.001 0 REVERSE VOLTAGE,(V) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) Document ID Page 3 DS-222645 Issued Date 2008/02/10 Revised Date Revision Page. 2013/11/15 C 6 Formosa MS Axial Leaded Schottky Barrier Rectifier SR120 THRU SR1200 Pinning information Pin Pin1 Pin2 Simplified outline cathode anode Symbol 1 2 1 2 Marking Type number SR120 SR130 SR140 SR150 SR160 SR180 SR1100 SR1150 SR1200 Marking code SR120 SR130 SR140 SR150 SR160 SR180 SR1100 SR1150 SR1200 Taping & bulk specifications for AXIAL devices 52.4mm 17mm DIA. 55mm Max. A 17mm DIA. 72mm DIA. 71mm Max. 355mm OFF Center both sids 1.0mm Max OFF Alignment 1.2mm 6.3mm REEL PACKING DEVICE Q'TY 1 COMPONENT CARTON Q'TY 2 APPROX. CASE (PCS / REEL) SPACING SIZE (PCS / CARTON) CROSS "A" in FIG. A (m/m) TYPE DO-41 5,000 5 mm 360 * 340 * 370 WEIGHT(kg) 20,000 10.8 AMMO PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS (m/m) (m/m) TYPE DO-41 5,000 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 260 * 83 * 160 440 * 270 * 340 WEIGHT(kg) 50,000 Document ID Page 4 DS-222645 Issued Date 2008/02/10 20.0 Revised Date Revision Page. 2013/11/15 C 6 Formosa MS Axial Leaded Schottky Barrier Rectifier SR120 THRU SR1200 BULK PACKING DEVICE Q'TY 1 INNER CARTON Q'TY 2 APPROX. CASE (PCS / BOX) BOX SIZE SIZE (PCS / CARTON) CROSS TYPE (m/m) DO-41 1,000 WEIGHT(kg) (m/m) 194 * 84 * 20 465 * 220 * 260 50,000 20.6 Suggested thermal profiles for soldering processes 1.Lead free temperature profile wave-soldering 280 Peak soldering temperature not to exceed 260ºC 260 240 220 Temperature(°C) 200 180 160 140 120 Peak Max well time 5 Max 100 80 Cool Down Max gradient-4ºC/s Suggested gradient - 2ºC/s or less 60 40 20 Preheat Max gradient 2ºC/s 0 0 20 40 60 80 100 120 140 160 180 200 220 240 Time(Sec) http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 5 DS-222645 Issued Date 2008/02/10 Revised Date Revision Page. 2013/11/15 C 6 Formosa MS Axial Leaded Schottky Barrier Rectifier SR120 THRU SR1200 High reliability test capabilities Item Test Conditions Reference o 1. Solder Resistance at 260±5 C for 10±2sec. immerse body into solder 1/16"±1/32" MIL-STD-750D METHOD-2031 2. Solderability at 245±5 oC for 5 sec. MIL-STD-202F METHOD-208 3. Pull Test 1.0kg in axial lead direction for 10 sec. I F=I O 4. Bend Lead 5. High Temperature Reverse Bias 6. Forward Operation Life 7. Intermittent Operation Life 8. Pressure Cooker MIL-STD-202F METHOD-211A 1.0kg weight applied to each lead bending arc 90 o±5 o for 3 times MIL-STD-202F METHOD-211A V R=80% rate at T J=125 oC for 168 hrs. MIL-STD-750D METHOD-1038 Rated average rectifier current at T A=25 oC for 500hrs. MIL-STD-750D METHOD-1027 T A = 25 OC, I F = I O On state: power on for 5 min. off state: power off for 5 min, on and off for 500 cycles. MIL-STD-750D METHOD-1036 JESD22-A102 15P SIG at T A=121 oC for 4 hrs. MIL-STD-750D METHOD-1051 9. Temperature Cycling -55 oC to +125 oC dwelled for 30 min. and transferred for 5min. total 10 cycles. 10. Forward Surge 8.3ms single half sine-wave one surge. MIL-STD-750D METHOD-4066-2 11. Humidity at T A=85 oC, RH=85% for 1000hrs. MIL-STD-750D METHOD-1021 12. High Temperature Storage Life at 175 oC for 1000 hrs. MIL-STD-750D METHOD-1031 http://www.formosams.com/ TEL:886-2-22696661 FAX:886-2-22696141 Document ID Page 6 DS-222645 Issued Date 2008/02/10 Revised Date Revision Page. 2013/11/15 C 6