FYLP-05W-UW

HIGH POWER FYLP 0.5W FYL FYLP- 0.5W-UW Features: Long operating life Highest flux Available in White Lambertian radiation pattern More energy efficient than incandescent and most halogen lamps Low voltage DC operated Cool beam,safe to the touch Instant light (less than 100ns) Fully dimmable No UV Superior ESD protection Eutectic die band,lower Rth. ROHS compliant –Lead-free Instant light (less than 100ns) Radiation Pattern Relative Lumionous Intensity(LOP @max=1) Package Dimensions Applications Reading lights (car,bus,aircraft) Portable(flashlight,bicycle). orientation Mini-accent Decorative Fiber optic alternative Appliance Sign and channel letter Architectural detail Cove lighting Automotive exterior ( stop-Tail-turn,CHMSL,Mirror side repeat) Edge-lit signs(Exit,point of sale) HIGH Typical Optical/Electrical Characteristics@TJ=25℃ POWER Item Forward Voltage Reverse Current 50% Power Angle Luminous Intensity Recommend Forward Current symbol Condition VF IR 2θ1/2 Фv IF X Y Rjp IF=150mA IF=150mA IF=150mA VR=5V IF=150mA IF=150mA Min 3.0 65 20 Typ 70 25 150 0.30 0.30 10 Max 3.6 50 75 -- Unit V uA deg LM mA Chromaticiyt coordinates Thermal Resistance, Junction to Case ℃/W Notes: 1. Tolerance of measurement of forward voltage±0.1v 2. Tolerance of measurement of peak Wavelength ±2.0nm 3. Tolerance of measurement of luminous intensity ±15%. Absolute Maximum Rating Item Forward Current Peak Forward Current* Reverse Voltage Power Dissipation Electrostatic discharge Operation Temperature Storage Temperature Lead Soldering Temperature* symbol IF IFD VR PD ESD TOPR TSTG TSOL Absolute Maximum Rating 150 300 5 500 ±4500 -30℃ to +80℃ -40℃ to +100℃ 260℃ for 3 Seconds Max Unit mA mA V mW V IFP Conditions :Pulse Width≤10 msec duty≤1/10 All high Power emitter LED products mounted on aluminum metal-core printed circuit board, can be lighted directly ,but we do not recommend lighting the high power products for more than 5 seconds without a directly,but we do not recommend lighting the high powe products for more than 5 seconds without a appropriate heat dissipation equipment. Re-flow, wave peak and soak-stannum soldering etc. is not suitable for this products. Sueggest to solder it by professional high power LED soldering machine. Can use invariable –temperature searing-iron with soldering condition: ≤260 degreen less than 3 seconds. HIGH POWER Typical optical/Electrical Characteristics Curves (Tj=25℃ Unless Otherwise Noted)