FYLP-1W-UWB

HIGH POWER FYLP 1W-UWB FYL FYLP-1W-UWB Features: Long operating life Highest flux Available in White Lambertian radiation pattern More energy efficient than incandescent and most halogen lamps Low voltage DC operated Cool beam,safe to the touch Instant light (less than 100ns) Fully dimmable No UV Superior ESD protection Eutectic die band,lower Rth. ROHS compliant –Lead-free Instant light (less than 100ns) Radiation Pattern Relative Lumionous Intensity(LOP @max=1) Package Dimensions Applications Reading lights (car,bus,aircraft) Portable(flashlight,bicycle) orientation Mini-accent Decorative Fiber optic alternative Appliance Sign and channel letter Architectural detail Cove lighting Automotive exterior ( stop-Tail-turn,CHMSL,Mirror side repeat) Edge-lit signs(Exit,point of sale) 20(.787) 15(.59) 1.3(.05)±0.1(.004) + + + 2(.0787) 4(.157) 60° 5.0(.197)±0.1(.004) 8(.315)±0.1(.004) HIGH Typical Optical/Electrical Characteristics@TJ=25℃ POWER Item Forward Voltage Reverse Current 50% Power Angle Luminous Intensity Recommend Forward Current symbol Condition VF IR 2θ1/2 Фv IF X Y Rjp IF=350mA IF=350mA IF=350mA VR=5V IF=350mA IF=350mA Min 3.0 110 50 Typ 120 60 350 0.30 0.30 10 Max 3.6 50 130 -- Unit V uA deg LM mA Chromaticiyt coordinates Thermal Resistance, Junction to Case ℃/W Notes: 1. Tolerance of measurement of forward voltage±0.1v 2. Tolerance of measurement of peak Wavelength ±2.0nm 3. Tolerance of measurement of luminous intensity ±15%. Absolute Maximum Rating Item Forward Current Peak Forward Current* Reverse Voltage Power Dissipation Electrostatic discharge Operation Temperature Storage Temperature Lead Soldering Temperature* symbol IF IFD VR PD ESD TOPR TSTG TSOL Absolute Maximum Rating 350 500 5 1000 ±4500 -30℃ to +80℃ -40℃ to +100℃ 260℃ for 3 Seconds Max Unit mA mA V mW V IFP Conditions :Pulse Width≤10 msec duty≤1/10 All high Power emitter LED products mounted on aluminum metal-core printed circuit board, can be lighted directly ,but we do not recommend lighting the high power products for more than 5 seconds without a directly,but we do not recommend lighting the high powe products for more than 5 seconds without a appropriate heat dissipation equipment. Re-flow, wave peak and soak-stannum soldering etc. is not suitable for this products. Sueggest to solder it by professional high power LED soldering machine. Can use invariable –temperature searing-iron with soldering condition: ≤260 degreen less than 3 seconds. HIGH POWER Typical optical/Electrical Characteristics Curves (Tj=25℃ Unless Otherwise Noted) Spectral Response Reduance Normalized Wave Length(nm) Forward Current Vs Forward Voltage 600 Relative Luminous intensity vs Forward current 6.0 Forward Current(mA) Relative Intensity (Lop@20mA=1) 500 5.0 4.0 3.0 2.0 1.0 0 400 300 200 0 1.6 2.2 2.8 3.4 4.0 4.6 0 350 F o r w a 400 C u r r e n t I F ( m A 600 rd ) 500 Forward Voltage(V) Forward Current Derating Curve Relative Luminous Intensity 600 Luminous Intensity Vs. Ambient Temperature 250 200 150 100 50 0 -20 0 20 40 60 80 100 Forward Current(mA) 500 400 300 200 100 0 0 40 80 120 160 200 Ambient Temperature TA( ) C Ambient Temperature TA( C )